SMT, PCB Electronic Industry News

SMT, PCB Electronics Assembly Manufacturing News

Stay informed with latest electronics manufacturing news added by SMTnet members.


  • SMTnet
  • »
  • SMT, PCB Electronics Manufacturing & Assembly Industry News

14403 SMT / PCB Assembly Industry News Releases

Press Preview for IPC Apex 2016 – Las Vegas, Booth 2413

Jan 04, 2016 | What test engineers worry about these days: the access to nodes of assemblies with ever increasing complexity is more and more difficult and results in reduced fault coverage.

JTAG Technologies B. V.

JTAG Technologies B. V.

Market leader and technology innovator of boundary scan software and hardware products and services.

Eindhoven , Netherlands

Test Services, Software Manufacturer

MIRTEC Corp. Reports Impressive 52 Percent Growth in Q4 2015

Jan 04, 2016 | MIRTEC Co. LTD, “The Global Leader in Inspection Technology,” reports continued growth in sales revenue for its North American Sales and Service Division for 2015. “We are very pleased to announce that sales revenue for our North American Division has grown by more than 52 percent for Q4 2015 with respect to that of 2014,” stated Brian D’Amico, President of MIRTEC Corp.

MIRTEC Corporation

Brian D’Amico President of MIRTEC Corp.

MIRTEC Corporation

Global supplier of Automated Optical Inspection and Solder Paste Inspection Systems to the Electronics Manufacturing Industry.

Oxford, Connecticut, USA

Inspection

STI Appoints Julio Estrada to Training Center Manager for Its Houston Facility

Jan 04, 2016 | STI Electronics announces the appointment of Julio Estrada as Training Center Manager for its Houston training center.

STI Electronics

STI Appoints Julio Estrada to Training Center Manager for Its Houston Facility.

STI Electronics

Since 1982, STI Electronics, Inc. (STI) has been the premier full service organization for training, consulting, laboratory analysis, prototyping, and small- to medium-volume PCB assembly in the electronics industry.

Madison, Alabama, USA

Assembly, Design, IPC Standards Certification Center, Contract Manufacturer, Training Provider

CableEye® Quick-Change, Shielded RJ45 Adapter Board, CB18C

Jan 04, 2016 | CAMI Research Inc. (Acton, MA) announces a new connector board for its CableEye cable and harness testing systems. Populated with eight, shielded RJ45 connectors, the boards may be used to test shielded or unshielded cables. Hipot rated to 500 Vdc/ 350 Vac, the CB18C may be used on all CableEye models.

CAMI Research Inc.

For testing shielded or unshielded connectors in high test-volume environments, allowing quick-change of the mating sockets.
HiPot rated to 500Vdc/350Vac.

CAMI Research Inc.

CableEye® continuity and HiPot pass/fail & diagnostic Cable & Harness Test Systems w simple scripting, labeling, documentation, cataloging & relay control. Dynamically display continuity, Ω, diodes, IR, dielectric breakdown & more

Acton, Massachusetts, USA

Manufacturer of Assembly Equipment, Test Services

BajaBid America expanding to Europe

Jan 04, 2016 | Scotland, UK – November 2015 — BajaBid in America expands their organization into Europe with the announcement that BajaBid.eu is their new European asset management partner with Stuart Hendry taking on the role of Director.

Baja Bid

Baja Bid

BAJA Bid was founded to form an auction organization with the primary objective of providing an outstanding experience for both our buyers and sellers.

Odessa, Florida, USA

Equipment Auctions, Equipment Dealer / Broker

PNC Purchases Benchtop AOI / Company Continues to Buy Products of the Future

Dec 31, 2015 | Nutley, NJ: Sam Sangani, President and owner of PNC has announced that his company recently acquired a Nordson YESTECH's BX Benchtop Automated AOI.

PNC Inc.

PNC Inc.

Complete turnkey jobs from PCB design, Fabrication, Laser cut SMT stencil, PCB assembly (SMT and through hole), Cable assembly and wire harness, Membrane switches, Name-plates and graphical overlays, all under one umbrella!

Nutley, New Jersey, USA

Manufacturer of Bare PCBs, Manufacturer of Assembled PCBs, Assembly, Design, Contract Manufacturer

IP Integration and Design Verification

Dec 30, 2015 | Whizz Systems offers the IP integration and design verification services

Whizz Systems

Whizz Systems offers the IP integration and design verification services. http://goo.gl/UyVjOM

Whizz Systems

Formed in 1989 as an advanced engineering and high mix low volume EMS services provider.

Santa Clara, California, USA

Manufacturer of Assembled PCBs, Design, Turnkey, Consultant, Contract Manufacturer

48 Inch Long LED Production Line Completed

Dec 29, 2015 | PROMATION announced it has completed the installation of another production line capable of handling PCBs up to 48 inches (1220 mm) in length. This line consisted of a Bare PCB loader, interconnect and inspection stations, post AOI sorting, as well as a large format Magazine Line Unloading system.

PROMATION, Inc.

PROMATION, Inc.

PROMATION offers automated products in 4 key areas: PCB handling systems, robotic soldering systems, automatic label placement, and work bench/work flow solutions.

Kenosha, Wisconsin, USA

Manufacturer of Assembly Equipment, Other, Soldering

Nihon Superior Will Show the Latest Advancements of the SN100C Alloy at NEPCON Japan

Dec 28, 2015 | Nihon Superior will exhibit in East Hall 1 E3-18 at NEPCON Japan, scheduled to take place Jan. 13-15, 2016 at the Tokyo Big Site in Japan. The reliability of SN100C has been proven in a wide range of electronics assembly products. The eutectic character of the silver-free SN100C alloy and the associated high fluidity provides faster wetting and increased spreadability over SAC305, which is beneficial in wave soldering and hand soldering applications as well as in reflow.

Nihon Superior Co., Ltd.

SN100CVTM P506 D4 is a lead-free, no-clean solder paste with its basic composition of (Sn-Cu-Ni+Ge+Bi).

Nihon Superior Co., Ltd.

Nihon has been a leader in soldering and brazing since 1966. Nihon manufactures SMT solder joining materials e.g. lead-free solder (SN100C:Sn-Cu-Ni-Ge etc): solder paste, solder spheres, flux cored solder wire, solder bar, etc.

Osaka, Japan

Manufacturer of Assembly Material, Soldering

STI Announces 2016 Training Schedule

Dec 28, 2015 | STI Electronics announcing that it has released the training schedule for 2016. The company’s Training Services division will offer more than 200 courses at its facilities in Madison, AL, Houston, TX, Tampa, FL and St. Petersburg, FL.

STI Electronics

STI Electronics

Since 1982, STI Electronics, Inc. (STI) has been the premier full service organization for training, consulting, laboratory analysis, prototyping, and small- to medium-volume PCB assembly in the electronics industry.

Madison, Alabama, USA

Assembly, Design, IPC Standards Certification Center, Contract Manufacturer, Training Provider

ADLINK Technology to present latest Application Ready Intelligent Platforms for Gaming at ICE Totally Gaming Exhibition

Dec 23, 2015 | ADLINK will take the opportunity at ICE Totally Gaming Exhibition in London, 2-4 February 2016 at booth N1-224 to showcase our latest, broad portfolio for the worldwide gaming industry.

ADLINK Technology, Inc.

ADLINK Technology, Inc.

Provider of wide range of embedded computing products and services to the test & measurement and automation industries.

New Taipei City 235, Taiwan

Manufacturer of Components

Acculogic Appoints New Agent in China and Hong Kong

Dec 22, 2015 | Acculogic announces the appointment of BE FIRST TECHNOLOGY CO., LTD. as its representative throughout China and Hong Kong. BE FIRST TECHNOLOGY has locations in Beijing, Shanghai, Shenzhen, Xi'an and Chengdu.

Acculogic Inc.

Judy Bao, General Manager at BE FIRST TECHNOLOGY.

Acculogic Inc.

Manufacturer of a broad range of systems & instruments for testing electronic devices, circuit boards and more. Products include Boundary Scan (JTAG) test systems and Flying Probe testers.

Markham, Ontario, Canada

Test Services

Award-Winning AXI and 3D AOI from ViTrox Technologies – Find out Why at NEPCON Japan

Dec 22, 2015 | ViTrox Technologies today announced that it will exhibit with KYORITSU TEST SYSTEM CO., LTD. in East 3 hall, No. E 16-28 at NEPCON Japan, scheduled to take place on Jan. 13-15, 2016 at the Tokyo Big Sight in Japan. ViTrox has been selected for more than 10 prestigious industry awards for its AXI and AOI developments over the last five years. Find out why and check out the award-winning V810 S2EXi In-line 3D Advanced AXI system and V510 Optimus 3D AOI system.

ViTrox Technologies

ViTrox Technologies

A cutting-edge solutions provider of innovative, advanced and cost effective automated vision inspection system & equipment for the semiconductor and electronic packaging industries

Penang, Malaysia

Inspection

Mycronic receives order for a Prexision-80 mask writer

Dec 22, 2015 | Mycronic has received an order for a Prexision-80 mask writer for advanced display applications from a customer in Asia. The system is scheduled to be delivered during the first quarter of 2017 at the latest.

Mycronic Technologies AB

Mycronic Technologies AB

Mycronic, formerly MYDATA, is the key manufacturer of assembly machine for electronics. Our product portfolio contains Pick&Place machines, Jet-printing machines and component storage towers.

Täby, STOCKHOLM, Sweden

Manufacturer of Assembly Equipment, Assembly, OEM

IPC Commends U.S. Senate on Passage of Frank R. Lautenberg Chemical Safety for the 21st Century Act Statement from John Mitchell, IPC President and CEO

Dec 20, 2015 | On behalf of IPC – Association Connecting Electronics Industries® and an estimated 800,000 people employed in our 2,200 U.S. member facilities, we commend the U.S. Senate for passing the Frank R. Lautenberg Chemical Safety for the 21st Century Act (S. 697).

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association, Non-Profit, Events Organizer

World's largest supplier of SMT equipment for the first time in 2015

Dec 20, 2015 | Believing that the growth strategy of ASM Assembly Systems has been confirmed, CEO Günter Lauber is optimistic for 2016 despite some risks with regard to the economy. Thanks to strong demand for SIPLACE and DEK solutions, the company became the world’s largest maker of SMT equipment for the first time in 2015. The Smart #1 SMT Factory concept is expected to provide additional impulses for continued growth. At the Productronica show, the industry’s leading trade fair held in November, ASM introduced a series of new platforms, systems and solutions for advanced programming, process integration and material logistics. They enable the customers to move their production one step at a time towards SMT-specific Industry 4.0 concepts that enable them to manufacture with even more flexibility and efficiency. Lauber also believes that his company is perfectly positioned for future technologies in the wafer-based integration of components to form complex modules (such as fan-out WLCSP and system-in-package).

ASM Assembly Systems GmbH & Co. KG

ASM Assembly Systems GmbH & Co. KG

ASM Assembly Systems is the supplier of SIPLACE, a leader in surface mount technology (SMT) equipment, software, and services to the electronics assembly market.

Munich, Germany

Manufacturer of Assembly Equipment, Pick and Place, Software Manufacturer

DEN-ON INSTRUMENTS, CO., LTD. Appoints Distributor in Malaysia

Dec 20, 2015 | DEN-ON INSTRUMENTS is pleased to announce the appointment of SWK Venture Sdn bhd as its distributor in Malaysia. Located in Penang Malaysia, SWK supplies and provides technical services for production machinery and equipment such as PCB Conveyor Handling, PCB Routers, Stencil Cleaners, Ultrasonic Cleaning Systems, Laser Markers, Resistance / Spot Welding etc.

DEN-ON INSTRUMENTS CO., LTD.

Mr Sunny Lim, General Manager of SWK.

DEN-ON INSTRUMENTS CO., LTD.

Design, development, and manufacture of soldering, desoldering, rework systems and tools for the electronics industry.

Tokyo, Japan

Repair/Rework

CEO Günter Lauber: Transition to Smart Factory means continued growth for ASM Assembly Systems

Dec 18, 2015 | Believing that the growth strategy of ASM Assembly Systems has been confirmed, CEO Günter Lauber is optimistic for 2016 despite some risks with regard to the economy. Thanks to strong demand for SIPLACE and DEK solutions, the company became the world's largest maker of SMT equipment for the first time in 2015.

ASM Assembly Systems GmbH & Co. KG

ASM Assembly Systems GmbH & Co. KG

ASM Assembly Systems is the supplier of SIPLACE, a leader in surface mount technology (SMT) equipment, software, and services to the electronics assembly market.

Munich, Germany

Manufacturer of Assembly Equipment, Pick and Place, Software Manufacturer

Ersa to Exhibit at the SMTA Rocky Mountain Expo & Tech Forum

Dec 17, 2015 | Kurtz Ersa North America is pleased to announce that it will exhibit at the SMTA Rocky Mountain Expo & Tech Forum, scheduled to take place Tuesday, Jan. 26, 2016 at the West Club at Mile High Stadium in Denver, CO. Company representatives will discuss the complete Ersa product line, including the new Smartflow 2020 selective soldering system.

kurtz ersa Corporation

Smartflow 2020 selective soldering system.

kurtz ersa Corporation

Manufacturer of Selective Soldering Systems, Ersascope BGA Inspection Systems, BGA Rework Systems, Soldering Irons, Wave Solder and Reflow Equipment.

Wertheim, Germany

Manufacturer of Assembly Equipment, Soldering

Congressional Passage of ‘Tax Extenders’ Bill Is Great News for U.S. Electronics Manufacturers

Dec 17, 2015 | IPC – Association Connecting Electronics Industries® today is applauding the U.S. Congress for enacting meaningful tax reform legislation, including making the research and development (R&D) tax credit permanent.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association, Non-Profit, Events Organizer

Supercharge your ERP with a Component Sourcing Tool

Dec 17, 2015 | Just as the email was to the fax or the Internet was to the email we have all had to use technology to be one step ahead of the competition.

Inlynk Software

Inlynk Software

INLYNK Software is a Software Solution provider for the electronics manufacturing industry. FEATURES: - Parts & BOM Management - Suppliers Management - Customers Management - Production Management

Laval, Quebec, Canada

Software Manufacturer

Printed circuit board industry core trend appeared for a new growth

Dec 17, 2015 | Printed circuit board industry core trend appeared for a new growth

Shenzhen Eastwin Trading Ltd.

Shenzhen Eastwin Trading Ltd.

PCB design, PCB layout, PCB manufacture, components purchasing, PCB assembly, test, packing and PCB delivery

Guangdong province, China

OEM

Inovar Further Strengthens Its Board of Directors by Appointing Industry Expert Charlie Barnhart

Dec 16, 2015 | Inovar announces that Charlie Barnhart, a well known EMS industry insider, has joined its Board of Directors.

Inovar, Inc.

Charlie Barnhart.

Inovar, Inc.

Inovar, Inc. is a leading Contract Electronic Manufacturer (CEM) dedicated to providing flexible solutions to Original Equipment Manufacturers in the fastest growing segments of the electronic industry.

Logan, Utah, USA

OEM

IPC APEX EXPO 2016 Educational Programs Highlight Research, Innovation and Forward Thinking Registration Now Open

Dec 16, 2015 | The latest technical research, industry best practices, ground-breaking technologies and forward thinking innovations will take center stage throughout the IPC APEX EXPO® 2016 technical conference and professional development courses, which will take place March 13–17 at the Las Vegas Convention Center in Las Vegas, Nevada. Registration is now open at www.IPCAPEXEXPO.org.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association, Non-Profit, Events Organizer

Pulse Electronics' ProxAnt TL 1.0 Package Combines a Proximity Sensor with an Antenna to Optimize both Functions

Dec 16, 2015 | Pulse Electronics Corporation introduces an all-in-one combination antenna and proximity sensor package to optimize the characteristics of both functions, thus enabling better device performance and increased design flexibility for tablets, laptops, and notebook computers. The ProxAnt TL 1.0 is a seven band main antenna, a proximity sensor chip, and all needed components included on the same flexible circuit board. Without requiring physical contact, the sensor recognizes when it is close to the user and sends a signal to the host processor to reduce the transmission power to the antenna, thus lowering SAR. The sensor also recognizes movement to avoid a false trigger.

Pulse Electronics

Pulse Electronics

Pulse Electronics has a long operating history of innovation in magnetics, antennas and connectors.

San Diego, California, USA

Subcontractor

SHENMAO Introduces 606-P133 Solder Paste for Laser Soldering

Dec 16, 2015 | SHENMAO PF606-P133 Solder Paste is designed for selective laser soldering on tiny solder joints (1.5mm or smaller), especially on expensive, temperature–sensitive components and assemblies. In the past, such a small solder joint is not suitable for standard reflow processes and has to be soldered manually. With PF606-P133 Solder Paste, automatic laser soldering can easily be accomplished.

Shenmao Technology Inc.

Shenmao Technology Inc.

SHENMAO Technology, Inc. supplier of Pb/Pb-free Solder Pastes, Solder Wire, Solder Bar, Flux, BGA Sphere, Bumping Paste/Flux, PCB Plating Anode, PV Ribbon Electronics Assembly Materials, for over 44 years from 10 world locations.

TaoYuan County, Taiwan

Manufacturer of Assembly Material, Assembly, Component Packaging, Repair/Rework, Soldering

Great Lakes Engineering, Inc. Receives Supplier Recognition Award from Veeco

Dec 16, 2015 | Great Lakes Engineering announced today that it is the latest recipient of the 2015 Supplier Recognition Award from Veeco Instruments, Inc., a process equipment company.

Great Lakes Engineering, Inc.

Great Lakes Engineering, Inc.

GLE is a trend-setting manufacturer of surface mount stencils, precision laser cut parts and photo chemical machined parts for the defense, medical, electronics, aviation, energy, telecommunications, and computer industries.

Maple Grove, Minnesota, USA

Manufacturer of Assembly Material

SMTA Announces New Executive Administrator

Dec 16, 2015 | The SMTA is pleased to announce that Tanya Martin, SMTA Director of Operations, will assume the role of Executive Administrator on January 1, 2016. Current Executive Administrator, JoAnn Stromberg, retires on December 31, 2015 after 29 years with the Association. JoAnn has worked closely with Tanya over the past 18 months to ensure that she is informed and knowledgeable on all SMTA programs and activities for a smooth transition.

Surface Mount Technology Association (SMTA)

Surface Mount Technology Association (SMTA)

The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.

Eden Prairie, Minnesota, USA

Association, Non-Profit, Training Provider, Events Organizer

ADLINK Technology acquires PrimTech Ltd.

Dec 15, 2015 | ADLINK Technology announces the agreement with PrimTech Ltd. concerning the 100% share acquisition of PrismTech Ltd. by ADLINK Technology based on the resolution of the board meeting held on Dec 14th, 2015.

ADLINK Technology, Inc.

ADLINK Technology, Inc.

Provider of wide range of embedded computing products and services to the test & measurement and automation industries.

New Taipei City 235, Taiwan

Manufacturer of Components

QCG Expands Production Facility

Dec 15, 2015 | RICHARDSON, TX (December 15, 2015) - QCG announced today the expansion of its PCB assembly production facility. The company has added three brand new pick-and-place machines, an additional reflow oven, as well as additional skilled solder technicians, SMT Operators.

QCG, Inc.

QCG, Inc.

QCG, Inc. - Your Printed Circuit Board Design and Assembly support in hard to build technology such as Package on Package (PoP BGA), Dual row QFN / Multi row QFN and fine pitch bump die; all with competitive rates.

Richardson, Texas, USA

Manufacturer of Assembled PCBs, Design, Contract Manufacturer

SHENMAO Introduces 606-P133 Solder Paste for Laser Soldering

Dec 14, 2015 | SHENMAO PF606-P133 Solder Paste is designed for selective laser soldering on tiny solder joints (1.5mm or smaller), especially on expensive, temperature-sensitive components and assemblies. In the past, such a small solder joint is not suitable for standard reflow processes and has to be soldered manually. With PF606-P133 Solder Paste, automatic laser soldering can easily be accomplished.

Shenmao Technology Inc.

Shenmao Technology Inc.

SHENMAO Technology, Inc. supplier of Pb/Pb-free Solder Pastes, Solder Wire, Solder Bar, Flux, BGA Sphere, Bumping Paste/Flux, PCB Plating Anode, PV Ribbon Electronics Assembly Materials, for over 44 years from 10 world locations.

TaoYuan County, Taiwan

Manufacturer of Assembly Material, Assembly, Component Packaging, Repair/Rework, Soldering

Sono-Tek Corporation Sells 4,000 Fluxers in 40 Years

Dec 13, 2015 | Sono-Tek Corporation is proud to announce the sale of its 4,000th fluxer to Jabil Circuit Inc. This milestone was achieved in Sono-Tek’s 40th year in business.

SONO-TEK CORPORATION

Some of the members of Sono-Tek’s production and service team that were involved in Sono-Tek’s 4000th ultrasonic spray fluxer milestone.

SONO-TEK CORPORATION

Manufacturer of precision ultrasonic spraying systems for a myriad of applications. Our patented technologies produce micron size uniform droplets, creating ultra thin layers onto any size or shape substrate.

Milton, New York, USA

Manufacturer of Assembly Equipment

Photo Stencil Sells Guadalajara, Mexico Laser Stencil Business to Management Team

Dec 13, 2015 | Photo Stencil announces that it has sold the Photo Stencil business in Guadalajara, Mexico to the facility's management team, Francisco Lujano and Armando Berumen. Photo Stencil's Mexico facility produces laser-cut stencils and will continue to sell both the laser-cut stencils they manufacture and electroform stencils that will be made by Photo Stencil in its new Golden, CO facility.

Photo Stencil LLC

Photo Stencil LLC

Photo Stencil provides high-performance stencils, squeegee blades, thick film and metal mask screens and tooling for the surface mount technology (SMT) assembly, solar, and semiconductor industries.

Colorado Springs, Colorado, USA

Manufacturer of Components

Pulse Electronics' Clarity-Pearl Antennas Aesthetically Improve Public Safety Radio Coverage of In-Building Repeater Systems

Dec 13, 2015 | Pulse Electronics Corporation introduces a new edition in the Clarity® family of antennas that operates at UHF band frequencies including 380-520 MHz and 698-960 MHz to improve public safety radio coverage. The Clarity-Pearl antennas deliver an architecturally pleasing solution to requirements set by the International Fire Code and National Fire Protection Association (IFC/NFPA) codes for public safety in-building communication. Their ultra-thin white UV stabilized plastic radome is 311mm in diameter and protrudes just 9.5mm below the ceiling for the lowest in-building antenna profile in the industry. They provide an antenna solution for challenges created by multi-story structures with weak propagation characteristics and basements with low ceilings.

Pulse Electronics

Clarity® family of antennas.

Pulse Electronics

Pulse Electronics has a long operating history of innovation in magnetics, antennas and connectors.

San Diego, California, USA

Subcontractor

Indium Corporation Features InFORMS® at NEPCON Japan

Dec 13, 2015 | Indium Corporation will feature its reinforced indium and solder alloy fabrications InFORMS® at NEPCON Japan, Jan. 13-15 in Tokyo, Japan.

Indium Corporation

Indium Corporation

Solder pastes, solder preforms, solder spheres, soldering fluxes, electrically-conductive adhesives. All alloys: tin-lead, lead-free, indium alloys, and more.

Utica, New York, USA

Manufacturer of Assembly Material, Soldering

DEN-ON INSTRUMENTS, CO., LTD. to Show Its Rework Product Line at NEPCON Japan

Dec 13, 2015 | DEN-ON INSTRUMENTS, CO., LTD. is pleased to announce that it will exhibit in East Hall E1-1 at NEPCON Japan, scheduled to take place Jan. 13-15, 2016 at the Tokyo Big Site in Japan. DEN-ON will showcase its rework product line driven by the latest advances in PCB and component miniaturization technologies

DEN-ON INSTRUMENTS CO., LTD.

DEN-ON INSTRUMENTS CO., LTD.

Design, development, and manufacture of soldering, desoldering, rework systems and tools for the electronics industry.

Tokyo, Japan

Repair/Rework

Mycronic AB is EDGE certified for its gender diversity work

Dec 13, 2015 | Mycronic AB is one of the first companies in Sweden to reach certification according to the EDGE (Economic Dividends for Gender Equality) global standard for workplace gender equality. Last month Mycronic was also awarded the Allbright Prize in recognition of its focused efforts in the diversity area.

Mycronic Technologies AB

Mycronic Technologies AB

Mycronic, formerly MYDATA, is the key manufacturer of assembly machine for electronics. Our product portfolio contains Pick&Place machines, Jet-printing machines and component storage towers.

Täby, STOCKHOLM, Sweden

Manufacturer of Assembly Equipment, Assembly, OEM

MicroCare Introduces ‘Game-Changing’ Products at Productronica 2015

Dec 13, 2015 | The cleaning experts at MicroCare Europe enjoyed an unparalleled week of success at Productronica 2015. The MicroCare team was a clear stand-out at the show, with a strong message, new products and an impressive number of visitors coming to the stand. This level of commitment and innovation will help companies clean their PCBs faster, better and at lower cost while meeting ever-more stringent European and global regulations.

MicroCare Corporation

MicroCare Corporation

The leading supplier of cleaners and lubricants for critical environments.

New Britain, Connecticut, USA

Cleaning

Whizz Systems added 3 newest & largest Intelligent STORAGE System Juki ISM2000XL Fortress in-house

Dec 11, 2015 | Whizz Systems added 3 newest & largest Intelligent STORAGE System Juki ISM2000XL Fortress in-house

Whizz Systems

Whizz Systems added 3 newest & largest Intelligent STORAGE System Juki ISM2000XL Fortress in-house that guarantees to keep components safe while allowing for easy and intelligent management of component inventory. http://goo.gl/muq3ZX

Whizz Systems

Formed in 1989 as an advanced engineering and high mix low volume EMS services provider.

Santa Clara, California, USA

Manufacturer of Assembled PCBs, Design, Turnkey, Consultant, Contract Manufacturer

High Quality SMT Stencils + Free Technical Assistance

Dec 10, 2015 | Metal Etch Services has more than 25 years experience manufacturing High Quality SMT Stencils, based on this experience we offer free technical assistance to all our customers.

Metal Etch Services, Inc.

Metal Etch Services, Inc.

Metal Etch Services is a manufacturer of Laser Cut Stencils, Thick Film Screens, Masks and Thin Metal Parts. We offer our services at 24 hour standard delivery anywhere in the United States,Mexico and Canada . Daily deliveries

San Marcos, California, USA

Manufacturer of Assembly Equipment, CAD, Repair/Rework, Screen Printing

Semi-Kinetics ITAR Registration

Dec 10, 2015 | Semi-Kinetics is proud to announce that they have obtained their International Traffic in Arms Regulations (ITAR) Registration. ITAR Registration means that Semi-Kinetics is able to fully support military and defense-related projects within the United States.

Semi-Kinetics

Semi-Kinetics

Semi-Kinetics is a leading electronic manufacturing service company providing complete turnkey and consignment assembly, in-circuit test, conformal coating and box build services.

Lake Forest, California, USA

Assembly, Turnkey, Contract Manufacturer, Service Provider

LED MATERIAL SELECTION – WHITE PAPER

Dec 10, 2015 | LED MATERIAL SELECTION – WHITE PAPER http://teamsmt.com/led-material-selection-white-paper/

Surface Mount Technology Corp.

Surface Mount Technology Corp.

An EMS company. Services including Design, Prototype, Domestic and Off-Shore Assembly, High Level Assembly, Test solutions, Global Distribution and Continuing Product Support.

Appleton, Wisconsin, USA

Manufacturer of Assembled PCBs

SMT HELPS DEVELOP CONTROL PANEL FOR AEROSPACE COMPANY

Dec 10, 2015 | SMT HELPS DEVELOP CONTROL PANEL FOR AEROSPACE COMPANY

Surface Mount Technology Corp.

Surface Mount Technology Corp.

An EMS company. Services including Design, Prototype, Domestic and Off-Shore Assembly, High Level Assembly, Test solutions, Global Distribution and Continuing Product Support.

Appleton, Wisconsin, USA

Manufacturer of Assembled PCBs

NEW SMT PRODUCTION LINE

Dec 10, 2015 | NEW SMT PRODUCTION LINE http://teamsmt.com/new-production-line/

Surface Mount Technology Corp.

Surface Mount Technology Corp.

An EMS company. Services including Design, Prototype, Domestic and Off-Shore Assembly, High Level Assembly, Test solutions, Global Distribution and Continuing Product Support.

Appleton, Wisconsin, USA

Manufacturer of Assembled PCBs

SMT FEATURED IN “MADE IN WISCONSIN” SEGMENT

Dec 10, 2015 | Green Bay, WI – WFRV news, a local affiliate of CBS, chose SMT to highlight a news segment titled “Made in Wisconsin”. This segment explores companies in Wisconsin who are leaders in their field or have programs and practices in place that are breaking new ground. Click on our website http://teamsmt.com/smt-featured-in-made-in-wisconsin-segment/ for more details.

Surface Mount Technology Corp.

Surface Mount Technology Corp.

An EMS company. Services including Design, Prototype, Domestic and Off-Shore Assembly, High Level Assembly, Test solutions, Global Distribution and Continuing Product Support.

Appleton, Wisconsin, USA

Manufacturer of Assembled PCBs

NPL Electronics Interconnection Group FREE Webinars 2016 Launched

Dec 10, 2015 | We are very pleased to help organise the NPL monthly webinars which are free to join and provide support to the industry world wide

ASKbobwillis.com

NPL Free Webinars look into the future

ASKbobwillis.com

On site and online Training and consultancy in electronics manufacture. Wide range of training products which are solder worldwide by IPC, SMTA, SMART Group and others

Chelmsford, Essex, United Kingdom

Consultant, Training Provider

PNC Purchases Real time X-Ray inspection system

Dec 09, 2015 | The Jewel Box 70T from Glenbrook Technologies

PNC Inc.

PNC Inc.

Complete turnkey jobs from PCB design, Fabrication, Laser cut SMT stencil, PCB assembly (SMT and through hole), Cable assembly and wire harness, Membrane switches, Name-plates and graphical overlays, all under one umbrella!

Nutley, New Jersey, USA

Manufacturer of Bare PCBs, Manufacturer of Assembled PCBs, Assembly, Design, Contract Manufacturer

New Startup Combines Therapeutics and Microelectronics to Deliver Highly Innovative Products and Solutions

Dec 09, 2015 | Microtek is proud to announce the opening of its Corporate Headquarters at 10865 Rancho Bernardo Road, Suite 101, San Diego, CA.

Microtek, Inc.

Microtek, Inc.

Microtek focuses on optimum microelectronics packaging solutions from prototype to production for applications in: Die Attach, Die Sorting, Flip Chip, MEMS, MOEMS, VCSEL, Photonics, Ultrasonic, RFID..

San Diego, California, USA

Manufacturer of Assembled PCBs, Component Packaging, Design, Pick and Place, Turnkey

Essemtec’s outstanding 3D jet printing and 3D assembly solutions created great attention at productronica 2015

Dec 08, 2015 | Essemtec recently exhibited exceptional 3D jet printing and 3D assembly solutions at productronica 2015. Additionally, Essemtec presented an integrated work cell especially suitable for manufacturers who have to handle frequent product changes.

ESSEMTEC

ESSEMTEC

Essemtec is a worldwide leader in manufacturing of highly flexible Surface Mount Technology (SMT) production equipment - pick-and-place system, dispenser, printer, oven, storage system and software Solutions.

Aesch, ZH, Switzerland

Manufacturer of Assembly Equipment, Component Packaging, Pick and Place, Screen Printing, Soldering

ONLINE SHOPPING FROM WWW.SMTHELP.COM

Dec 08, 2015 | Now sitting in your own company - Search Spare parts and machines @ www.smthelp.com and find out the price for SMT /AI/ Universal/FUJI/TDK/Panasert Products. Just a few minutes for your to add to cart the products to your account and will be shifted to your company the soonest possible. For more information visit our website : www.smthelp.com OR email : shakeel@smthelp.com

Shenzhen Southern Machinery Sales and Service Co., Ltd

Shenzhen Southern Machinery Sales and Service Co., Ltd

to provide you with guidance from the AI PCB design(DFM),AI process(NPI) to import equipment installation and auto insertion technology(THT) training, machine trouble shooting/upgrade/overhaul.

Shenzhen, China

Manufacturer of Assembly Equipment, Manufacturer of Assembled PCBs, Design, Equipment Dealer / Broker, Service Provider

  • SMTnet
  • »
  • SMT, PCB Electronics Manufacturing & Assembly Industry News
Reflow Ovens thermal process improvement

SMT in-printer dispensing