SMT, PCB Electronic Industry News

SMT, PCB Electronics Assembly Manufacturing News

Stay informed with latest electronics manufacturing news added by SMTnet members. If your company released a new product, received an award, or expanded its business, share the news!


  • SMTnet
  • »
  • SMT, PCB Electronics Industry News

14892 EMS News Stories.

per page

Count On Tools, Inc. Develops StripFeeder Precision Plate Systems

Feb 15, 2016 | Count On Tools has added a new product – the Precision Plate – to its award-winning line of StripFeeder systems. The StripFeeder Precision Plate allows customers to run high capacity lanes of micro components, such as 0201s, 01005s and 03015s in 4mm or 8mm tape (paper or emboss), on a single plate.

Count On Tools, Inc.

StripFeeder Precision Plate Systems.

Count On Tools, Inc.

COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.

Gainesville, Georgia, USA

Manufacturer of Assembly Equipment, Manufacturer of Assembly Material, Pick and Place, Repair/Rework, Contract Manufacturer

Count On Tools Inc. Will Debut New StripFeeder Lightweight Rails at APEX

Feb 15, 2016 | Count On Tools has released a new accessory – the Lightweight Rails – for its award-winning line of StripFeeder products. The StripFeeder Lightweight Rails enable customers to take full advantage of the StripFeeder platform when operating in OEM tray towers with weight limits on tray capacity. The skeletonized design reduces carrier tray weight by 40-50 percent. StripFeeder Lightweight Rails are available in 0.25" (6mm), 0.50" (12mm), 0.75" (19mm), and 1.125" (28mm) pocket depths.

Count On Tools, Inc.

New StripFeeder Lightweight Rails.

Count On Tools, Inc.

COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.

Gainesville, Georgia, USA

Manufacturer of Assembly Equipment, Manufacturer of Assembly Material, Pick and Place, Repair/Rework, Contract Manufacturer

BTU to Demo New Comprehensive RecipePro Prediction Tool at productronica China

Feb 15, 2016 | BTU International will exhibit in Booth #E1-1106 at productronica China, scheduled to take place March 15-17, 2016, at the Shanghai New International Expo Centre. BTU will showcase its RecipePro recipe generator software, jointly developed with Electronic Controls Design Inc. (ECD), as well as highlight the latest version of the Energy Pilot software and Industry 4.0 compliant solutions.

BTU International

BTU International

Global supplier of advanced thermal processing equipment and processes to the electronics assembly market.

North Billerica, Massachusetts, USA

Manufacturer of Assembly Equipment

Yamaha IM America Launches New, Interactive Web Site

Feb 12, 2016 | Yamaha IM America announces the launch of a new, interactive, easy-to-navigate web site at www.yamaha-motor-im.com. The new site provides easy navigation and in-depth information about Yamaha’s Trusted Technology, including Yamaha's state-of-the-art Total Line Solution, comprised of printers, mounters, dispensers, and inspections machines operated on a single unified software platform, Yamaha Y-Fact.

Yamaha Motor IM America, Inc.

Yamaha Motor IM America, Inc.

Yamaha Motor IM America offers Single and Dual Lane production Printers, Mounters and AOI.

Kennesaw, Georgia, USA

Manufacturer of Assembly Equipment, Inspection

KYZEN to Address Ways to Improve Stencil Printing Reliability at productronica China

Feb 12, 2016 | KYZEN announces plans to exhibit in Booth #E1.1216 at productronica China, scheduled to take place March 15-17, 2016, at the Shanghai New International Expo Centre. KYZEN will discuss recent research that points to ways to improve stencil printing reliability. The research strongly supports the need for a wet wipe with an engineered solvent that matches to the flux composition.

KYZEN Corporation

KYZEN Corporation

A leading supplier of precision cleaning chemistries to the worldwide electronics, metal finishing, medical, semiconductor, and optical industries.

Nashville, Tennessee, USA

Cleaning

Inovaxe Finalizes Rep Agreement with Atlantech

Feb 12, 2016 | Inovaxe, a world leader and provider of innovative material handling and inventory control systems, announces the appointment of Atlantech, Inc. as its newest manufacturers’ representative. Atlantech will represent Inovaxe throughout Eastern Pa., Del., D.C., W.Va., Md., N.C., S.C., Ga, Ala., Va., Tenn. and Miss.

Inovaxe Corporation

Nagy Bayoumi, President and Owner of Atlantech.

Inovaxe Corporation

Inovaxe is focused on developing state-of-the-art Inovative Material Handling Solutions (MHS) for Low-Volume/High-Mix Manufacturing.

Deerfield Beach, Florida, USA

Manufacturer of Assembly Equipment

Indium Corporation Features Heat-Spring® for LED Manufacturing at Strategies in Light

Feb 11, 2016 | Indium Corporation will feature Heat-Spring®, a compressible, recyclable, metal thermal interface material, at Strategies in Light on March 1-3 in Santa Clara, Calif.

Indium Corporation

Indium Corporation

Solder pastes, solder preforms, solder spheres, soldering fluxes, electrically-conductive adhesives. All alloys: tin-lead, lead-free, indium alloys, and more.

Utica, New York, USA

Manufacturer of Assembly Material, Soldering

Mycronic Acquires RoyoTech and Kognitec

Feb 11, 2016 | Mycronic AB has acquired 75 percent of RoyoTech Digitalelektronik GmbH and has an option to acquire the remaining 25 percent. At the same time Mycronic acquires 100 percent of Kognitec Vertrieb and Service GmbH. Both companies are based in Höhenkirchen, Germany.

Mycronic Technologies AB

Mycronic Technologies AB

Mycronic, formerly MYDATA, is the key manufacturer of assembly machine for electronics. Our product portfolio contains Pick&Place machines, Jet-printing machines and component storage towers.

Täby, STOCKHOLM, Sweden

Manufacturer of Assembly Equipment, Assembly, OEM

Indium Corporation’s Indium8.9HF Solder Paste Technology Solution to Avoid the Void™

Feb 11, 2016 | Indium Corporation's Indium8.9HF is a halogen-free, no-clean solder paste that is specifically formulated to Avoid the Void™, while delivering high transfer efficiency with low variability.

Indium Corporation

Indium Corporation

Solder pastes, solder preforms, solder spheres, soldering fluxes, electrically-conductive adhesives. All alloys: tin-lead, lead-free, indium alloys, and more.

Utica, New York, USA

Manufacturer of Assembly Material, Soldering

MET Stencil Launches NanoSlic® Gold coated Stencil

Feb 10, 2016 | MET Stencil announces the launch of the NanoSlic® Gold stencil. NanoSlic® is the world's most advanced stencil coating technology for improving solder paste printing. "We are pleased to announce that we have been licensed by FCT Assembly to sell this coating to the US market.” said Fred Cox, President of MET Stencil. "Stencil users will immediately see the benefits in their print."

MET Stencil

MET Stencil Launches NanoSlic® Gold Coated Stencil

MET Stencil

MET is ready to meet your stencil requirements. We manufacture Electroformed Stencils, Laser Cut Stencils and Chemically Etched Stencils for various solder paste and glue printing applications.

Lumberton, New Jersey, USA

Other, Adhesives/Dispensing, CAD, Design, Screen Printing

Lean Stream to represent ESE screen printers

Feb 10, 2016 | Equipment Services LLC announced that it has chosen Lean Stream LLC to represent its ESE high-precision SMT screen printers in Northern California and Nevada.

Andersen Equipment Services LLC

Andersen Equipment Services LLC

Andersen Equipment provides service on all brands of all smt equipment. we do not charge travel on service calls and do not charge extra for emergency service calls.

Ramsey, Minnesota, USA

Service Provider

IPC APEX EXPO Buzz Sessions Cover Hot Industry Trends and Insight into Tomorrow’s Technology

Feb 10, 2016 | Tackling the hot topics that have the electronics industry “buzzing,” seven free Buzz sessions will be offered at IPC APEX EXPO®, March 15-17 at the Las Vegas Convention Center. The industry’s top technical experts will provide information and insight on subjects ranging from conformal coating and lead-free solder alloys to R&D funding and a market outlook for the global electronics supply chain.

Association Connecting Electronics Industries (IPC)

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association, Non-Profit, Events Organizer

SMTA South East Asia Technical Conference on Electronics Assembly Program Finalized

Feb 10, 2016 | SMTA is excited to announce the finalized program and registration is now open for the South East Asia Technical Conference on Electronics Assembly. The event will be held April 12-14, 2016 at the Eastin Hotel in Penang, Malaysia.

Surface Mount Technology Association (SMTA)

Surface Mount Technology Association (SMTA)

The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.

Eden Prairie, Minnesota, USA

Association, Non-Profit, Training Provider, Events Organizer

Laser Scanning Workshop

Feb 10, 2016 | Applications for Laser Scanning

Production Modeling Corporation (PMC)

Production Modeling Corporation (PMC)

PMC, a digital manufacturing, engineering, and operations productivity solutions firm providing solutions in laser scanning, 3D/2D CAD, dynamic simulation, industrial engineering, material handling, program management, IE services

Dearborn, Michigan, USA

Other

PMC Offers High-Tech Gift to the WA3

Feb 10, 2016 | High-Tech Project in Detroit, Michigan

Production Modeling Corporation (PMC)

Production Modeling Corporation (PMC)

PMC, a digital manufacturing, engineering, and operations productivity solutions firm providing solutions in laser scanning, 3D/2D CAD, dynamic simulation, industrial engineering, material handling, program management, IE services

Dearborn, Michigan, USA

Other

NEW BOOK ANNOUNCEMENT: Process Simulation Using WITNESS

Feb 10, 2016 | Process Simulation Using WITNESS serves as a practical guide and manual for professionals, researchers, engineers, management consultants, and simulation trainers.

Production Modeling Corporation (PMC)

- Emphasizes real-world applications of simulation modeling in both services and manufacturing sectors
- Discusses the role of simulation in Six Sigma projects and Lean Systems
- Contains examples in each chapter on the methods and concepts presented

Production Modeling Corporation (PMC)

PMC, a digital manufacturing, engineering, and operations productivity solutions firm providing solutions in laser scanning, 3D/2D CAD, dynamic simulation, industrial engineering, material handling, program management, IE services

Dearborn, Michigan, USA

Other

IPC APEX 2016 is 1 month away!

Feb 09, 2016 | IPC APEX EXPO 2016 VISIT YINCAE BOOTH 1718 Join Dr. Yin’s Presentation on March 17th from 9AM-10AM

YINCAE Advanced Materials, LLC.

YINCAE Advanced Materials, LLC.

Yincae Advanced Materials, LLC is a developer, manufacturer, and supplier of high performance coatings, adhesives, electronic and optoelectronic materials.

Albany, New York, USA

Manufacturer of Assembly Material, Components/Substrates, Contract Manufacturer

Preview for JTAG Technologies for Embedded World, Nuremberg Hall 4, booth 578

Feb 08, 2016 | Boundary Scan Market Leader, JTAG Technologies invites you to join us at Embedded World in Nuremberg to discuss two hot board test topics; Design for Testability (DfT) and Optimise your ATE.

JTAG Technologies B. V.

JTAG Technologies B. V.

Market leader and technology innovator of boundary scan software and hardware products and services.

Eindhoven , Netherlands

Test Services, Software Manufacturer

MP elektronik to Demo SEHO’s SelectLine-C at AMPER

Feb 08, 2016 | SEHO Systems will exhibit in Booth F 2.02 at AMPER, scheduled to take place March 15-18, 2016 at the Brno Exhibition Centre in Czech Republic. SEHO’s representative, MP elektronik s.r.o., will showcase the SelectLine-C selective soldering machine.

SEHO Systems GmbH

SEHO’s SelectLine-C at AMPER.

SEHO Systems GmbH

SEHO develops and manufactures reflow, selective and wave soldering machines for the electronics industry. Since its foundation in 1976, SEHO is worldwide THE contact partner whenever soldering is involved.

Kreuzwertheim, Germany

Manufacturer of Assembly Equipment, Soldering

Engineered Materials Systems Introduces Low-Temperature Cure Conductive Adhesive for Static Drain and EMI/RFI Shielding Applications

Feb 08, 2016 | Engineered Materials Systems announces the introduction of its new EMS 618-116 Adhesive. The low-temperature cure one-part conductive adhesive has been designed for circuit assembly applications.

EMS International Corporation

EMS 618-116 Adhesive.

EMS International Corporation

What we do: PCB Layout, Bare PCB, PCB Assembly, Component Sourcing, Molding, Enclosure, Connector, Cable, EMI Shield, Plastic Electronic product, Hardware Electronic product, PCMCIA, CardBus

Taoyuan City, Taoyuan County, Taiwan

Contract Manufacturer

DKL Metals Showcases SN100C at Southern Manufacturing

Feb 08, 2016 | DKL Metals is pleased to announce that it will exhibit in Stand M2 at Southern Manufacturing, scheduled to take place February 9-11, 2016 at FIVE in Farnborough, Hampshire.

DKL Metals Ltd

DKL Metals Ltd

The UK's largest producer of ultra pure solder alloys for the electronics assembly and HASL industry across Europe.

Linlithgow, Scotland

Manufacturer of Assembly Material, Soldering

PXI Signs Agreement for Sub-distribution of DEN-ON INSTRUMENTS Legacy Products under Seika Machinery

Feb 07, 2016 | DEN-ON INSTRUMENTS, CO., LTD. is pleased to announce that Seika Machinery and PXI (Pacific X-ray Imaging) have forged a partnership for the promotion and support of DEN-ON products. Under the agreement, PXI will be a sub-distributor for the DEN-ON line in the U.S. under Seika Machinery.

DEN-ON INSTRUMENTS CO., LTD.

DEN-ON INSTRUMENTS CO., LTD.

Design, development, and manufacture of soldering, desoldering, rework systems and tools for the electronics industry.

Tokyo, Japan

Repair/Rework

Microtronic GmbH Starts Its 35th Year Stronger Than Ever

Feb 07, 2016 | Microtronic today announced that 2016 marks its 35th year in business. Microtronic was founded in 1981 and is based near Munich, Germany.

Microtronic GmbH

Ernst J. M. Eggelaar, President of Microtronic.

Microtronic GmbH

Microtronic offers a wide range of products and services to the microelectronics industries. Some of the brands we stock include SONIX, Akrometrix, AIM specialty solders, APE, AVIO, AIT, IMI, Earthtronics, SEIT and many more.

Neumarkt St. Veit, Germany

Distributor, Training Provider

Zhone Technologies & Sypris Electronics Selling Excess Electronics Manufacturing Assets

Feb 06, 2016 | EMS providers Zhone Technologies and Sypris Electronics in Florida will be liquidating some of their excess and unused assets utilizing the online auction services of Baja Bid. The bidding for this event will open promptly at 8:00am EST on February 23, 2016 and the closing will begin at 11:00am EST on February 25, 2016.

Baja Bid

Baja Bid

BAJA Bid was founded to form an auction organization with the primary objective of providing an outstanding experience for both our buyers and sellers.

Odessa, Florida, USA

Equipment Auctions, Equipment Dealer / Broker

Indium Corporation to Feature Low-Voiding Solder Paste at IPC APEX 2016

Feb 06, 2016 | Indium Corporation will feature its void-reducing no-clean solder pastes to help customers Avoid the Void™ at IPC APEX Expo.

Indium Corporation

Indium Corporation

Solder pastes, solder preforms, solder spheres, soldering fluxes, electrically-conductive adhesives. All alloys: tin-lead, lead-free, indium alloys, and more.

Utica, New York, USA

Manufacturer of Assembly Material, Soldering

Barry Industries and Modelithics Develop Broadband 5mm C-QFN Package Model to 40GHz

Feb 06, 2016 | Barry Industries and Modelithics, Inc. have published a report detailing the broadband performance of Barry's 5mm high temperature co-fired ceramic (HTCC) quad-flat-no-leads (QFN) package to 40GHz. Barry Industries is an ISO9001:2008 certified ITAR-registered manufacturer of high quality thick film resistors, terminations, attenuators and high temperature co-fired ceramic (HTCC) packaging.

Barry Industries, Inc.

Barry Industries, Inc.

Designer and manufacturer of semiconductor packaging and resistive components including terminations, resistors and attenuators.

Attleboro, Massachusetts, USA

Manufacturer of Components

Barry Industries and Modelithics Develop Broadband 5mm C-QFN Package Model to 40GHz

Feb 06, 2016 | Barry Industries and Modelithics, Inc. have published a report detailing the broadband performance of Barry's 5mm high temperature co-fired ceramic (HTCC) quad-flat-no-leads (QFN) package to 40GHz. Barry Industries is an ISO9001:2008 certified ITAR-registered manufacturer of high quality thick film resistors, terminations, attenuators and high temperature co-fired ceramic (HTCC) packaging.

Barry Industries, Inc.

Barry Industries, Inc.

Designer and manufacturer of semiconductor packaging and resistive components including terminations, resistors and attenuators.

Attleboro, Massachusetts, USA

Manufacturer of Components

CableEye® Tester Calibration Verification Board, CB50 - Takes the Guesswork out of Scheduling Calibration

Feb 05, 2016 | CAMI Research Inc. (Acton, MA) announces a new board for its CableEye cable and harness testing systems. Populated with precision resistors, it allows users to determine empirically whether the tester requires calibration. The CB50 may be used on all CableEye models.

CAMI Research Inc.

A simple method that allows quality-focussed companies to carry out periodic verification of tester calibration.

CAMI Research Inc.

CableEye® continuity and HiPot pass/fail & diagnostic Cable & Harness Test Systems w simple scripting, labeling, documentation, cataloging & relay control. Dynamically display continuity, Ω, diodes, IR, dielectric breakdown & more

Acton, Massachusetts, USA

Manufacturer of Assembly Equipment, Test Services

Count On Tools, Inc. to Introduce MYDATA Feeder Repair Kits at APEX

Feb 03, 2016 | Count On Tools announced plans to expand its repair program for MYDATA Agilis Feeders by offering Feeder Repair Kits. Each MYDATA Feeder Repair Kit will include: a precision machined aluminum side cover plate with cover tape plow pre-installed, a new spring, and matching screws for reassembly.

Count On Tools, Inc.

Feeder Repair Kits. Each MYDATA Feeder Repair Kit.

Count On Tools, Inc.

COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.

Gainesville, Georgia, USA

Manufacturer of Assembly Equipment, Manufacturer of Assembly Material, Pick and Place, Repair/Rework, Contract Manufacturer

ZESTRON Americas Introduces Steve Williamson, New Regional Sales Manager

Feb 03, 2016 | ZESTRON is pleased to announce the addition of Mr. Steve Williamson as the new Regional Sales Manager. In his role, Mr. Williamson will focus on growing ZESTRON’s product and services business while expanding the current customer base in the Eastern American and Canadian regions.

ZESTRON Americas

Mr. Steve Williamson as the new Regional Sales Manager.

ZESTRON Americas

The globally leading provider of high precision cleaning products, services and training solutions in the electronics and semiconductor manufacturing industries.

Manassas, Virginia, USA

Cleaning, Test Services, Training Provider

North American PCB Industry Ends 2015 with 0.4 Percent Sales Growth

Feb 03, 2016 | IPC announced the December 2015 findings from its monthly North American Printed Circuit Board (PCB) Statistical Program. Slow sales growth continued in December, bringing 2015 to a close at 0.4 percent growth over 2014. The book-to-bill ratio returned to parity at 1.00 in December.

Association Connecting Electronics Industries (IPC)

Trend in North American PCB Book-to-Bill Ratio

Association Connecting Electronics Industries (IPC)

IPC is the trade association for the printed wiring board and electronics assembly industries.

Bannockburn, Illinois, USA

Association, Non-Profit, Events Organizer

Symposium on Counterfeit Parts and Materials Call for Abstracts

Feb 03, 2016 | The SMTA is pleased to announce the Call for Abstracts for the Symposium on Counterfeit Parts and Materials June 28-30, 2016 College Park, Maryland. The deadline to submit an abstract is March 7, 2016.

Surface Mount Technology Association (SMTA)

Surface Mount Technology Association (SMTA)

The SMTA membership is a network of professionals who build skills, share practical experience and develop solutions in electronic assembly technologies and related business operations.

Eden Prairie, Minnesota, USA

Association, Non-Profit, Training Provider, Events Organizer

Koh Young Announces Sale of 1000th 3D AOI System

Feb 03, 2016 | Koh Young Technology announces the delivery of their 1000th 3D in-line Inspection AOI system, a Zenith model; the system was sold to Mando-Hella Electronics Corp. (MHE), located in Songdo, Incheon, South Korea. Mando-Hella is recognized as leading the trend in advanced electronic technology in the Korean automotive market.

Koh Young Technology

The Koh Young Zenith 3D AOI system measures the true profilometric shape of components, solder joints, patterns and even foreign material on assembled PCBs with patented 3-dimensional measurement, overcoming the shortcomings and vulnerabilities of traditional 2D AOI.

Koh Young Technology

Koh Young Technology is the world's leader in 3D solder paste and SMT component / solder joint measurement and inspection technology used in the production of micro-electronics assemblies.

Seoul, South Korea

Inspection

Juki Automation Systems Hires Selective Solder Applications Engineer

Feb 03, 2016 | Juki Automation Systems is pleased to announce the appointment of Greg Brown as Selective Solder Applications Engineer. Mr. Brown will be based out of the JAS, Inc. Morrisville location.

Juki Automation Systems

Greg Brown as Selective Solder Applications Engineer.

Juki Automation Systems

Juki is one of the worlds leading SMT placement companies with over 25000 machines installed worldwide and is the pioneer of the modular automated assembly line.

Morrisville , North Carolina, USA

Manufacturer of Assembly Equipment, Inspection, Pick and Place, Screen Printing, Soldering

ACL Staticide Introduces ESD Floor Vinyl

Feb 03, 2016 | ACL, Inc. introduces conductive vinyl flooring material for ESD Protected Areas (EPA). Homogeneous distribution of carbon black and proprietary polymers give ACL’s conductive vinyl a continuous and permanent path to ground.

ACL Staticide, Inc.

6800 Conductive Chair Mat, part of the new ESD Floor Vinyl line from ACL, Inc.

ACL Staticide, Inc.

ACL is a manufacturer of PCB rework and repair chemicals, ESD workbench products including Dualmat rubber, static detection meters, dissipative floor coatings, and anti-static topicals including Staticide®. ISO 9001:2008 certified

Chicago, Illinois, USA

Other, Antistatic, Cleaning, Repair/Rework

Component Interface at SMTA Houston

Feb 03, 2016 | KYZEN is pleased to announce that it will present at the SMTA Houston Expo & Tech Forum, scheduled to take place Tuesday, March 1, 2016 at the Stafford Centre in Texas. Dr. Mike Bixenman will present the paper titled “Characterizing Materials at the Component Interface Can Improve Reliability.”

KYZEN Corporation

Dr. Mike Bixenman.

KYZEN Corporation

A leading supplier of precision cleaning chemistries to the worldwide electronics, metal finishing, medical, semiconductor, and optical industries.

Nashville, Tennessee, USA

Cleaning

BTU to Discuss Reflow Profiling at SMarTsol’s User Group/Workshop in Mexico

Feb 03, 2016 | BTU International today announced that Fred Dimock will present at the SMarTsol User Group/Workshop, scheduled to take place Feb. 17-18, 2016, in Mexico. Mr. Dimock will discuss reflow fundamentals, including profiling and process control.

BTU International

BTU International

Global supplier of advanced thermal processing equipment and processes to the electronics assembly market.

North Billerica, Massachusetts, USA

Manufacturer of Assembly Equipment

Preview for Seica Inc. – Las Vegas, Nevada, IPC Apex March 15-17, 2016, booth # 2310 In the ramp light: Automation and Industry 4.0

Feb 03, 2016 | The theme for Seica at Apex this year will be automation and Industry 4.0. Highlights will include the traditional Compact line of bed of nails and functional testers; the Pilot line, a truly versatile and multi-faceted flying probe system; its Mini line of benchtop ATE, and the Firefly line, a premier laser selective soldering system.

3M Electrical Solutions Division

3M Electrical Solutions Division

A full range of product, software and service solutions to help electronics manufacturers maintain an effective EOS/ESD control program.

Austin , Texas, USA

Aegis to Unveil Their FactoryLogix R3 Manufacturing Operations Software to the Medical Industry in Booth 3613 at MD&M West Show in Anaheim, CA February 9-11

Feb 03, 2016 | Aegis Software will present their market leading FactoryLogix R3 software at this year’s MDM West and Advanced Manufacturing Expo in Anaheim, California from February 9th to 11th. This 3rd release of their flagship solution embraces the principles of Industry 4.0 and IoM (Internet of Manufacturing) including resource scheduling, configure to order (CTO) and a standardized machine communication technology.

Aegis Industrial Software Corporation

Aegis Industrial Software Corporation

Developers of State-of-the-Art Manufacturing Enterprise Automation Software

Horsham, Pennsylvania, USA

Software Manufacturer

Kurtz Ersa to Discuss the Smartflow 2020 at the SMTA Houston & Dallas Expos

Feb 03, 2016 | Kurtz Ersa North America is pleased to announce that it will exhibit at the SMTA Houston & Dallas Expo & Tech Forums in Texas. SMTA Houston is scheduled to take place Tuesday, March 1, 2016 at the Stafford Centre and SMTA Dallas is scheduled to take place Thursday, March 3, 2016 at the Plano Centre. Company representatives will discuss the complete Ersa product line, including the new Smartflow 2020 selective soldering system.

kurtz ersa Corporation

The Smartflow 2020 selective soldering system.

kurtz ersa Corporation

Manufacturer of Selective Soldering Systems, Ersascope BGA Inspection Systems, BGA Rework Systems, Soldering Irons, Wave Solder and Reflow Equipment.

Wertheim, Germany

Manufacturer of Assembly Equipment, Soldering

Kurtz Ersa Expands Its Sales Network

Feb 03, 2016 | Kurtz Ersa North America announced that it has hired Technica USA as its newest manufacturers’ representative. Technica will represent Ersa in a wide territory, spanning from Northern California, Northern Nevada and Oregon, to Washington, Idaho, Colorado, Utah, Wyoming and Nebraska.

kurtz ersa Corporation

Frank Medina President/CEO of Technica.

kurtz ersa Corporation

Manufacturer of Selective Soldering Systems, Ersascope BGA Inspection Systems, BGA Rework Systems, Soldering Irons, Wave Solder and Reflow Equipment.

Wertheim, Germany

Manufacturer of Assembly Equipment, Soldering

Kurtz Ersa to Demo Rework and Soldering Tools at EPTECH

Feb 03, 2016 | Kurtz Ersa North America is pleased to announce that it will exhibit at the EPTECH Calgary & Edmonton Shows. The Calgary show is scheduled to take place Tuesday, March 1, 2016 at The Coast Plaza Hotel & Conference Centre in Canada, and the Edmonton Show is scheduled to take place Thursday, March 3, 2016 at the Doubletree by Hilton.

3M Electrical Solutions Division

Smartflow 2020 selective soldering system.

3M Electrical Solutions Division

A full range of product, software and service solutions to help electronics manufacturers maintain an effective EOS/ESD control program.

Austin , Texas, USA

Gen3 Systems Announces Product Lineup for Southern Manufacturing

Feb 02, 2016 | Gen3 Systems Limited is pleased to announce that it will exhibit in Booth E19 at Southern Manufacturing, scheduled to take place Feb. 9-11, 2016 at FIVE in Farnborough, Hampshire.

Gen3 Systems

ContaminometerTM ,CM22+.

Gen3 Systems

Gen3 Systems is a specialist manufacturer of test and measurement equipment used to help predict reliability of electronic circuits and systems in the field.

Farnborough Hampshire, United Kingdom

Assembly, Cleaning, Inspection, Test Services

Kurtz Ersa Growth Triggers Atlantech Sales Team Addition

Feb 02, 2016 | Kurtz Ersa North America Atlantech, Inc. has hired Mr. Bryce Timms as its newest sales representative in Eastern Tennessee, South Carolina, Georgia, and selected accounts in North Carolina. 

kurtz ersa Corporation

Mr. Bryce Timms as its newest sales representative in Eastern Tennessee, South Carolina, Georgia, and selected accounts in North Carolina. 

kurtz ersa Corporation

Manufacturer of Selective Soldering Systems, Ersascope BGA Inspection Systems, BGA Rework Systems, Soldering Irons, Wave Solder and Reflow Equipment.

Wertheim, Germany

Manufacturer of Assembly Equipment, Soldering

Metcal to Host the First Workshop of the 2016 Cutting Edge Rework Tour

Feb 02, 2016 | Metcal today announced that it will hold the first workshop of the 2016 Cutting Edge Rework Tour on Thursday, March 3, 2016 at the   Hilton Melbourne Rialto Place in Melbourne, FL. The workshop will address the latest techniques for contactless site cleaning and rework as well as repair of a variety of applications.

Concoat Ltd.

Concoat Ltd.

Electronic Production Process Materials manufacturer. Including Conformal Coatings, Soldering materi

Camberley, Surrey, United Kingdom

Manufacturer of Assembly Material

ADLINK and Saguna Bring to Market a Mobile Edge Computing (MEC) Solution for Extreme Outdoor Environments

Feb 02, 2016 | ADLINK Technology announced today a joint Mobile Edge Computing (MEC) solution designed for deployments in harsh outdoor environments. As MEC gains momentum, and new trials and live deployments are underway, the need for robust, no-fault equipment increases. Bringing the Internet closer to users and the things of the IoT requires MEC platforms to be deployed at the edge of the Radio Access Network (RAN), which is often in harsh outdoor environments.

ADLINK Technology, Inc.

ADLINK SETO-1000.

ADLINK Technology, Inc.

Provider of wide range of embedded computing products and services to the test & measurement and automation industries.

New Taipei City 235, Taiwan

Manufacturer of Components

Flexible Tubing is No Match for Schleuniger’s EcoCut 3200

Feb 01, 2016 | Cardiocom, located in Chanhassen, MN, is a manufacturer of telehealth devices. Given the sensitive nature of these devices, it is important that they be extremely accurate and reliable, which all starts with a high-quality manufacturing process.

Schleuniger, Inc.

EcoCut 3200 Wire Cutting Machine

Schleuniger, Inc.

Schleuniger, Inc. is a leading manufacturer of wire processing equipment. Our innovative automatic and semi-automatic machines are designed to cut, strip, crimp and mark all types of wire and cable.

Manchester, New Hampshire, USA

Other

Great Success at DesignCon

Feb 01, 2016 | Hampoo Showcases its' one-stop PCB Solution.

Hampoo Science & Technology Co., Ltd

Hampoo Science & Technology Co., Ltd

Hampoo provides rigid flex pcb, multilayer pcb, HDI board, PCB Assembly, and parts sourcing.

Shenzhen, China

Manufacturer of Assembled PCBs

SMTA International Best of Conference Award Winner

Jan 31, 2016 | Recent SMTA International Best of Conference Award Winner, Bob Willis, pledged a half of his winnings to the Charles Hutchins Educational Grant upon receiving notification of his award. Bob is a long-time SMTA member, workshop instructor and support of the organisation

ASKbobwillis.com

Recent SMTA International Best of Conference Award Winner, Bob Willis pledges half of his award to the Charles Hutchins Educational Grant while on a scuba trip

ASKbobwillis.com

On site and online Training and consultancy in electronics manufacture. Wide range of training products which are solder worldwide by IPC, SMTA, SMART Group and others

Chelmsford, Essex, United Kingdom

Consultant, Training Provider

Computrol Increases Inspection Capabilities at Its Idaho Plant with Two MIRTEC MV-7 OMNI 3D AOI Systems

Jan 26, 2016 | Computrol today announced that it has purchased two MV-7 OMNI 3D In-Line AOI Machines from MIRTEC. The systems have been installed at Computrol’s Meridian, ID facility. Computrol selected the MV-7 OMNI 3D In-Line AOI system again, following the success it has had with the systems installed at its Orem, Utah facility in 2014.

Computrol, Inc.

Eric Ames and Kelliee Servatius from Computrol’s engineering team.

Computrol, Inc.

Computrol, Inc. is a national leader in low to medium volume, high mix contract manufacturer of electronic assemblies. We specialize in customer service, quality and on time delivery. We have 3 locations in the United States.

Meridian, Idaho, USA

Manufacturer of Assembled PCBs, Assembly, Contract Manufacturer

  • SMTnet
  • »
  • SMT, PCB Electronics Industry News
PCB Assembly Equipment Auctions

ii-feed SMD Intelligent Feeder