ACE KISS - 104
ACE KISS - 104 has been sold
Model: |
ACE KISS - 104 |
Category: |
|
Model Year: |
2007 |
Condition: |
|
Location: |
North Carolina, USA |
Offered by: |
|
Contact Supplier |
ACE KISS 104 Selective Solder
Model: KISS 104
Vintage: 2007
Voltage: 115/120
Two (2) pots - One leaded, one lead-free
FEATURES:
The KISS-104 is a fully configured In-Line SMEMA compatible Selective Soldering Machine ready to produce your product. The KISS-104 includes the following standard features:
“Super Quick” motion for fastest processing times.
Safety cover with internal lighting and fume vents.
Universal PCB edge conveyor with program controlled width adjustment, positive PCB location and PCB flattening.
Solder pot and pump assembly.
Set of “Bullet” nozzles (7 nozzles, 3mm up to 25mm dia.).
Heated Nitrogen to the solder nozzle.
Windows XP O/S with simple on or off line programming.
Rapid setup and time to “first production” using CAD importing or on the machine “teach” functions.
Programmable flux deposition.
Programmable solder wave flow rate.
Automated in process solder wave height check / adjust.
Automated solder pot level check and fill.
Fiducial alignment prior to starting a process.
Set the time/temp profile for each individual component type for maximized process control and TAKT time.
Absolute control over all critical process parameters:
- Solder temperature interlocked to within 2 degrees C.
- Height, and travel speed of the solder wave.
- Programmable initial pre-heat soak time
Will Process PCBs 18” x 24” unassisted (flux and solder).
Step and repeat capability in both X and Y axis for multiple boards in a panel.
SPECIFICATIONS:
PCB Panel Size
Minimum Maximum
2” x 2” 18” x 24”
(18” x 42” with manual step over)
Safe “Keep Away” (distance to adjacent pads) 1mm
Motion (Super Quick)
Z-Axis Accuracy/Repeatability +/-.002"
Speed 0-4” inches/second
X and Y Axis Accuracy/Repeatability +/-.002"
Speed 0-6 inches/second
Solder Pot
Temperature PID proportioning (0-400°C)
± 2°C
Solder Capacity 30 lbs.
Pump PC controlled
Controls PC with Windows XP O.S.
Physical
Dimensions 60" wide x 52" deep x 54" high
Weight 725 lbs.
Facilities
Power 120VAC/1 Ph/60 Hz 15 amps
Air 80 - 90 PSI
Nitrogen 15-50 CFH @ 60-70 PSI
Exhaust 350 CFM recommended
(2) 4” dia. Take-offs at rear panel