Rohde & Schwarz CMW500

Model:	Rohde & Schwarz CMW500
Category:	In-Circuit Testers
Condition:	used
Location:	Florida, USA
Offered by:	Test Equipment Connection
	Contact Supplier

Rohde & Schwarz CMW500

Contact us for specific options.
The R&S CMW500 marks the entry of a new generation of test equipment from Rohde & Schwarz for fast and precise production of current and future wireless devices.

The R&S Smart Alignment high-speed test concept plus the all-in-one architecture with integrated vector signal generator and analyzer are the prerequisites for state-of-the-art non-signaling alignment approaches.

The extreme scalability, test speed, and measurement accuracy of the R&S CMW500 are the assurance for minimum test costs..

Features:

Multi technology solution: GSM / GPRS / EDGE / WCDMA / mobile WiMAX / CDMA2000 / TD-SCDMA / LTE
Base model: general-purpose RF power meter and CW generator with List modes for fast calibration of wireless devices
Vector Signal Analyzer (VSA) for transmitter verification
Vector Signal Generator (VSG) for expanded receiver testing: ARB mode for short setup times or realtime mode for complex signals with high data volume
Reference RF power measurements with direct connection for R&S NRP power sensors
Easy connection to wireless devices with complex RF architecture using the integrated RF interface
State-of-the-art Graphical User Interface (GUI)
SCPI remote control via LAN/GPIB interface
Ready for LXI Class C
Process controller with Windows XP operating system for test routines and remote control via Windows Remote Desktop
Popular R&D and production test solution for many smart wireless products such as mobile phones, laptops and tablets.
R&S CMW500 Option List (at additional cost):

B100A = Baseband Measurement Unit, CMW module H100A
B110A = ARB + Realtime Baseband Generator Module
B200A = Signaling Unit Universal, GSM/CDMA2000/1xEV-DO
B210A GSM/GPRS/EDGE Signaling Extension Module
B220A = CDMA2000 1xRTT signaling module
B230A = CDMA2000 1xEV-DO signaling module
B300A = Signaling Unit, Wideband (SUW)
B450A = Data application unit
B510A = Four digital IQ interface
B570B = Extra RF Converter (TRX)
B590A = Extra RF front end, basic
B612A = IEEE Bus Interface Module (single connector)
B620A = Digital video interface
B660A = Option carrier
B661A = Ethernet switch
B690A = OCXO, basic stability
KA100 = Enabling of IP-Data interface for IPV4
KA150 = Extension of IP-Data interface for IPV6
KAC10 = LTE conformance test
KAF10 = VoLTE
KB036 = Extended frequency range, 3.3GHz to 6GHz, per RF converter
KM011 =TX measurement, IQ Versus Slot (software license)
KM012 = TX measurement, Multi Evaluation List Mode / MELM
KM050 = IP based measurements
KM200 = TX Measurement, GSM/GPRS/EDGE, Uplink
KM201 = TX Measurement, EDGE Evolution Extension of KM200 Uplink
KM400 = TX Measurement, WCDMA, Uplink
KM401 = TX Measurement, WCDMA HSPA Extension of KM400, Uplink
KM403 = TX Measurement, WCDMA HSPA+ Extension of KM401, Uplink
KM500 = TX Measurement, LTE FDD Release 8
KM550 = TX Measurement, LTE TDD (TD-LTE) Release 8
KM650 = TX measurement, WLAN IEEE 802.11a/b/g
KM651 = TX measurement, WLAN IEEE 802.11n SISO
KM700 = TX measurement, WiMAX# IEEE 802.16e
KM750 = TX measurement, TD-SCDMA uplink
KM800 = TX measurement CDMA2000 1xRTT reverse link
KM880 = TX measurement CDMA2000 1xEV-DO Revision 0/A/B reverse link
KS200 = Signaling (network emulation), GSM/GPRS/EDGE
KS201 = Signaling (network emulation), GSM Release 7 EDGE Evolution
KS203 = Signaling (network emulation), GSM Release 9 VAMOS
KS210 = Signaling (network emulation), GSM GPRS EDGE Release 6,
KS400 = Signaling (network emulation), WCDMA Release 99
KS401 = Signaling (network emulation), WCDMA Release 5/6 HSPA
KS403 = Signaling (network emulation), WCDMA Release 7 HSPA+, SISO
KS404 = Signaling (network emulation), WCDMA Release 8
KS410 = Signaling (network emulation), WCDMA Release 99
KS411 = Signaling (network emulation), WCDMA Release 5/6 HSPA
KS500 = Signaling (network emulation), LTE FDD Release 8, SISO
KS510 = Signaling (network emulation), LTE Release 8, SISO
KS520 = Signaling (network emulation), LTE MIMO2x2
KS550 = Signaling (network emulation), LTE TDD (TD-LTE) Release 8
KS800 = Signaling (network emulation)basic CDMA2000 1xRTT
KS810 = Signaling (network emulation)advanced CDMA2000 1xRTT
KS880 = Signaling (network emulation)basic CDMA2000 1xEV-DO Revision 0/A
KS881 = Signaling (network emulation)basic CDMA2000 1xEV-DO Revision B
KS890 = Signaling (network emulation)advanced CDMA2000 1xEV-DO Revision 0/A
KT053 = GSM/WCDMA, CMWrun sequencer software tool
KT055 = LTE, CMWrun sequencer software tool
KT058 = CDMA2k 1xRTT/EV-DO sequence
KV110x2 = Waveforms for ARB generator, library 1
KV112x2 = Waveforms for ARB generator, library 2
PS502 = Wideband Radio Communication Tester, Basic Assembly
PS502x1 = CMW500 basic assembly (mainframe), including : one RF converter
S550B = Baseband interconnection
S550Bx1 = Baseband Interconnection, flexible link,for non-signaling, signaling
S590A = RF Frontend, basic functn
S590Ax1 = RF Frontend, basic functionality
S590D = RF Frontend Module advanced
S600B = Front Panel with Display/Keypad
S600Bx1 CMW500 frontpanel with display/keypad CMW module H600B

Please Note:
*** KS500 requires B110A
*** KS501 requires KS500
*** Option B590A cannot be installed with S590D

As 4G and LTE applications expand, additional options may be released. Ask your Test Equipment Connection salesperson for details.
- See more at: https://www.testequipmentconnection.com/39736/Rohde_Schwarz_CMW500.php#sthash.wDiVerNu.dpuf