• SMTnet
  • »
  • Technical Library
  • »
  • Divergence in Test Results Using IPC Standard SIR and Ionic Contamination Measurements

Divergence in Test Results Using IPC Standard SIR and Ionic Contamination Measurements

Published:

July 13, 2017

Author:

K. Tellefsen, M. Holtzer, T. Cucu, M. Liberatore, M. Schmidt - Alpha Assembly Solutions, S. Moser, L. Henneken, P. Eckold, U. Welzel, R. Fritsch, D. Schlenker - Robert Bosch GmbH

Abstract:

Controlled humidity and temperature controlled surface insulation resistance (SIR) measurements of flux covered test vehicles, subject to a direct current (D.C.) bias voltage are recognized by a number of global standards organizations as the preferred method to determine if no clean solder paste and wave soldering flux residues are suitable for reliable electronic assemblies. The IPC, Japanese Industry Standard (JIS), Deutsches Institut fur Normung (DIN) and International Electrical Commission (IEC) all have industry reviewed standards using similar variations of this measurement. (...)

This study will compare the results from testing two solder pastes using the IPC-J-STD-004B, IPC TM-650 2.6.3.7 surface insulation resistance test, and IPC TM-650 2.3.25 in an attempt to investigate the correlation of ROSE methods as predictors of electronic assembly electrical reliability....

  • Download Divergence in Test Results Using IPC Standard SIR and Ionic Contamination Measurements article
  • To read this article you need to have Adobe PDF installed

You must be a registered user to talk back to us.

 
Company Information:

Alpha Assembly Solutions

Alpha Assembly Solutions is a world leader in the development, manufacturing, and sales of innovative materials used in the assembly electronics, industrial joining and Photo Voltaic market places.

South Plainfield, New Jersey, USA

Manufacturer of Assembly Material

  • Phone 814-941-1694
  • Fax 814-940-3811

Alpha Assembly Solutions website

Company Postings:

(1) technical library article

  • Jul 27, 2017 - Electrochemical Methods to Measure the Corrosion Potential of Flux Residues | KYZEN Corporation
  • Jul 21, 2017 - How to calibrate JUKI CF feeder | ZK Electronic Technology Co., Limited
  • Jun 01, 2017 - Evaluating the Effects of Plasma Treatment prior to Conformal Coating on Electronic Assemblies to Enhance Conformity of Coverage | Nordson MARCH
  • Mar 30, 2017 - Multiple Methods for Applying Paste Flux or Solder Paste for BGA Rework | BEST Inc.
  • Feb 01, 2017 - BGA Rework Process | BEST Inc.
  • Browse Technical Library »

Divergence in Test Results Using IPC Standard SIR and Ionic Contamination Measurements article has been viewed 508 times

  • SMTnet
  • »
  • Technical Library
  • »
  • Divergence in Test Results Using IPC Standard SIR and Ionic Contamination Measurements
Manufacturing Software

Reflow Ovens thermal process improvement