A High Thermal Conductive Solderable Adhesive


November 17, 2016


Dr. Mary Liu and Dr Wusheng Yin


With increasing LED development and production, thermal issues are becoming more and more important for LED devices, particularly true for high power LED and also for other high power devices. In order to dissipate the heat from the device efficiently, Au80Sn20 alloy is being used in the industry now. However there are a few drawbacks for Au80Sn20 process: (1) higher soldering temperature, usually higher than 320°C; (2) low process yield; (3) too expensive. In order to overcome the shortcomings of Au80Sn20 process, YINCAE Advanced Materials, LLC has invented a new solderable adhesive – TM 230. Solderable adhesives are epoxy based silver adhesives. During the die attach reflow process, the solder material on silver can solder silver together, and die with pad together. After soldering, epoxy can encapsulate the soldered interface, so that the thermal conductivity can be as high as 58 W/mk. In comparison to Au80Sn20 reflow process, the solderable adhesive has the following advantages: (1) low process temperature – reflow peak temperature of 230°C; (2) high process yield – mass reflow process instead of thermal compression bonding process; (3) low cost ownership. In this paper we are going to present the die attach process of solderable adhesive and the reliability test. After 1000 h lighting of LED, it has been found that there is almost no decay in the light intensity by using solderable adhesive – TM 230. ...

  • Download A High Thermal Conductive Solderable Adhesive article
  • To read this article you need to have Adobe PDF installed

You must be a registered user to talk back to us.

Company Information:

YINCAE Advanced Materials, LLC.

Yincae Advanced Materials, LLC is a developer, manufacturer, and supplier of high performance coatings, adhesives, electronic and optoelectronic materials.

Albany, New York, USA

Components/Substrates, Contract Manufacturer, Manufacturer of Assembly Material

  • Phone 5184522880

YINCAE Advanced Materials, LLC. website

Company Postings:

(23) products in the catalog

(15) technical library articles

(30) news releases

(3) job postings

  • Feb 22, 2018 - Hand Soldering with Lead Free Alloys | Metcal
  • Dec 07, 2017 - Utility of Dual Applicators for Non-Atomized Conformal Coating to Improve High-Volume Manufacturing Optimization | Nordson ASYMTEK
  • Nov 08, 2017 - Void Reduction in Reflow Soldering Processes by Sweep Stimulation of PCB Substrate | kurtz ersa Corporation
  • Jul 27, 2017 - Electrochemical Methods to Measure the Corrosion Potential of Flux Residues | KYZEN Corporation
  • Jul 21, 2017 - How to calibrate JUKI CF feeder | ZK Electronic Technology Co., Limited
  • Browse Technical Library »

A High Thermal Conductive Solderable Adhesive article has been viewed 1088 times

track trace and control

reflow oven profiler