Electronics Manufacturing Training

Technical Articles From iNEMI (International Electronics Manufacturing Initiative)

Read technical articles about electronics manufacturing added by iNEMI (International Electronics Manufacturing Initiative)


3 technical articles added by iNEMI (International Electronics Manufacturing Initiative)

Company Information:

iNEMI (International Electronics Manufacturing Initiative)

iNEMI is an industry-led consortium focused on identifying and closing technology gaps, which includes the development and integration of the electronics industry supply infrastructure.

Herndon, Virginia, USA

  • Phone 703-834-0330
  • Fax 703-834-2735

iNEMI (International Electronics Manufacturing Initiative) website

Company Postings:

(3) technical library articles

(21) news releases

Relative Humidity Dependence of Creep Corrosion on Organic-Acid Flux Soldered Printed Circuit Boards

May 09, 2018 | Haley Fu - iNEMI, Prabjit Singh - IBM Corporation, Dem Lee, Jeffrey Lee - iST-Integrated Service Technology, KarlosGuo, Julie Liu - Lenovo, Simon Lee, Geoffrey Tong - The Dow Chemical Company, Chen Xu - Nokia

Creep corrosion on printed circuit boards (PCBs) is the corrosion of copper metallization and the spreading of the copper corrosion products across the PCB surfaces to the extent that they may electrically short circuit neighboring features on the PCB. The iNEMI technical subcommittee on creep corrosion has developed a flowers-of-sulfur (FOS) based test that is sufficiently well developed for consideration as an industry standard qualification test for creep corrosion. This paper will address the important question of how relative humidity affects creep corrosion. A creep corrosion tendency that is inversely proportional to relative humidity may allow data center administrators to eliminate creep corrosion simply by controlling the relative humidity in the data center,thus, avoiding the high cost of gas-phase filtration of gaseous contamination. The creep corrosion relative humidity dependence will be studied using a modified version of the iNEMI FOS test chamber. The design modification allows the achievement of relative humidity as low as 15% in the presence of the chlorine-releasing bleach aqueous solution. The paper will report on the dependence of creep corrosion on humidity in the 15 to 80% relative humidity range by testing ENIG (gold on electroless nickel), ImAg (immersion silver) and OSP (organic surface preservative) finished PCBs, soldered with organic acid flux....

Testing Printed Circuit Boards for Creep Corrosion in Flowers of Sulfur Chamber

Jul 16, 2015 | Haley Fu; iNEMI, Prabjit Singh, Levi Campbell, Jing Zhang; IBM Corporation, Wallace Ables; Dell Corporation, Dem Lee, Jeffrey Lee; iST-Integrated Service Technology, Jane Li, Solomon Zhang; Lenovo Limited Corporation, Simon Lee; The Dow Chemical Company.

Qualification of electronic hardware from a corrosion resistance standpoint has traditionally relied on stressing the hardware in a variety of environments. Before the development of tests based on mixed flowing gas (MFG), hardware was typically exposed to temperature-humidity cycling. In the pre-1980s era, component feature sizes were relatively large. Corrosion, while it did occur, did not in general degrade reliability. There were rare instances of the data center environments releasing corrosive gases and corroding hardware. One that got a lot of publicity was the corrosion by sulfur-bearing gases given off by data center carpeting. More often, corrosion was due to corrosive flux residues left on as-manufactured printed circuit boards (PCBs) that led to ion migration induced electrical shorting. Ion migration induced failures also occurred inside the PCBs due to poor laminate quality and moisture trapped in the laminate layers....

PCB Dynamic Coplanarity At Elevated Temperatures

Nov 10, 2011 | John Davignon, Ken Chiavone, Jiahui Pan, James Henzi, David Mendez, Ron Kulterman

With the advent of larger packages and higher densities/pitch the Industry has been concerned with the coplanarity of both the substrate package and the PCB motherboard. The iNEMI PCB Coplanarity WG generated a snapshot in time of the dynamic coplanarity ...

Fluid Dispense Pump Integration

PCB equipment