rohs

"rohs" search results in the Electronics Forums



852 results found for "rohs" in the Electronics Forums

Order by: Relevancy |   Date

ROHS compliance for contract manufacturer

Jul 24, 2015 | ROHS compliance for contract manufacturer ROHS compliance for contract manufacturer little behind are we? look in the archives from 2002-2005 when ROHS was implemented. however no real requirement here, ask your customer what they are after, most simply want a c of c stating its ROHS compliant, if your are talking REACH, that's a entirely different story. id say you have far more work on developing the ROHS process in your shop than you do getting documentation established

ROHS compliance for contract manufacturer

Jun 17, 2015 | ROHS compliance for contract manufacturer ROHS compliance for contract manufacturer Does anyone have a suggestion for a good reference guide to implementing RoHS compliancy for Contract Manufacturing? I'm looking for info as to what documentation the CM needs to supply their customer and other various hoops that we might need to jump

Solder Paste Cleaning Procedure

Mar 8, 2013 | Solder Paste Cleaning Procedure Can a ROHS PCB with ROHS solder paste can be cleaned in same basin/sink when Non-ROHS solder paste PCB are cleaned? Any detail procedure or cleaning technics for NON ROHS Solder Paste PCB VS ROHS Solder based PCB?

ROHS 6/6 BGA device in Non-ROHS reflow

Oct 20, 2010 | ROHS 6/6 BGA device in Non-ROHS reflow ROHS 6/6 BGA device in Non-ROHS reflow Thanks for suggestion Hegemon.

ROHS 6/6 BGA device in Non-ROHS reflow

Oct 14, 2010 | ROHS 6/6 BGA device in Non-ROHS reflow ROHS 6/6 BGA device in Non-ROHS reflow Hi All, Is there any way to use ROHS6/6 [Non-leaded] BGA device in Non-ROHS reflow [240 Deg C] temp. environment. I need to do this because Leaded [ROHS5/6] device I was using is obsolete and Non-leaded[ROHS6/6] drop-in-replacement part is available now . One way out I am thinking is, not sure if it is correct or not. - Can we use leaded solder paste/solder cream for soldering this Non-leaded[ROHS6/6]device on board? Because of lower temp. [240 Deg.C] this Non-leaded[ROHS6/6] device balls may not melt but leaded solder paste [suppose to melt at 240C

BGA Voiding for RoHS

Nov 16, 2009 | BGA Voiding for RoHS BGA Voiding for RoHS Thank you for your responces. Chris

RoHS in China

Oct 7, 2009 | RoHS in China We believe "China RoHS" applies to placing electrical and electronic equipment on the China market. For more: * http://www.aeanet.org/GovernmentAffairs/gabl_ChinaRoHSpage0905.asp * http://www.rohs-international.com/china-rohs/

ROHS replacment parts

Jun 10, 2009 | ROHS replacment parts ROHS replacment parts What documentation issues are you having? We use ROHS only. The conversion has been relatively painless. We simply request the ROHS parts from the vendor with little issues. You might as well convert all your parts to ROHS, you'll have to eventually.

ROHS replacment parts

Jun 10, 2009 | ROHS replacment parts ROHS replacment parts We generally purchase RoHS for all; leaving leaded-only assemblies as the exception. We process leaded and lead-free components together in leaded products with few issues. As long as the customer doesn't mind the mix (I'm sure that some out there will, but mine don

ROHS replacment parts

Jun 9, 2009 | ROHS replacment parts ROHS replacment parts We have had issues for the last 4-5 years with converting our stock from leaded to ROHS components. We are a CM and have customers who want all ROHS and some that are still leaded. The problems we run into are when we intrduce a new ROHS component which is the same value as a leaded that we have in our system. often we have to deviate to use ROHS in place of leaded since leaded are becomeing harder to find. this casues a ton of documentation issues on our end. How does everyone else handle this? do you continue to purchase leaded parts or just ROHS for all (excpet BGA's)

American RoHS

May 22, 2009 | American RoHS American RoHS Maybe we need an organization like this one in the US? http://reachforlife.eu/home.php?lg=UK# Adopting the lead ban from the EU RoHS is madness. Y'all have a great holiday weekend, Patrick

Lead contamination from pogo pins

Dec 4, 2008 | Lead contamination from pogo pins Is anyone aware of any white papers regarding the possibility of lead contamination on ROHS assemblies from using the same test fixture with the same test probes on both tin/lead and ROHS assemblies. We have customers switching over but we are still manufacturing both and wanted some reassurance that we would not exceed the 0.1% ROHS requirement. Thanks.

Rohs finish with lead past

Dec 2, 2008 | Rohs finish with lead past Rohs finish with lead past This shouldn't give you any issues as long as you don't have to be RoHS compliant.

soldering ROHS boards with sn/pb components

Aug 27, 2008 | soldering ROHS boards with sn/pb components soldering ROHS boards with sn/pb components I need to solder SAC/HASL PC boards in a NON ROHS process (Tin Leaded solder paste and profile + Tin leaded components) Can I do that?? Regards, Eyal

coilcraft i ROHS inductors soldering problem

Aug 10, 2008 | coilcraft i ROHS inductors soldering problem coilcraft i ROHS inductors soldering problem Thanks Pete yes we usu ROHS solder paste in our process. I agree that this termination is more suitable for adhsive bonding rather than soldering. We'll try changing the termination type as you recommended. Eyal G

coilcraft i ROHS inductors soldering problem

Aug 7, 2008 | coilcraft i ROHS inductors soldering problem coilcraft i ROHS inductors soldering problem We have experienced the same problem with Pd/AG and P/Ag terminations on precision resistive parts. The problem is dissolution of the termination metallisation into the bulk solder. This is exacerbated by the higher thermal profiles required for RoHS compliant soldering. I am assuming that you are using RoHS solder for your assembly? I understand that the Pd/Ag and Pt/Ag finishes are designed to be used with conductive adhesive bonding. We changed to a pure Tin finish native and saw no further issues. If you change to the SAC finish offered by your

coilcraft i ROHS inductors soldering problem

Aug 7, 2008 | coilcraft i ROHS inductors soldering problem coilcraft i ROHS inductors soldering problem We are facing low quality due to soldering opens with coilcraft inductors 0402CS-2N7XGLW. The termination used is(suffix L =RoHS compliant silver-palladium-platinum-glass frit. Did anyone had this problem in the past? Can we do better using T = RoHS

FYI, ROHS Panel Discussion

Aug 6, 2008 | FYI, ROHS Panel Discussion FYI, ROHS Panel Discussion see attachment

Studie of the RoHS directive

Jan 18, 2008 | Studie of the RoHS directive Studie of the RoHS directive European rocket science!!!! A 189 page report to conclude that if you ban something you will use less of it. http://ec .europa.eu/enterprise/environment/reports_studies/studies/draft_rep_study_rohs_directive_dec07.pdf

Reflow soldering

Dec 5, 2007 | but what is your theory on how banned substances can get on a RoHS board if you are running both Pb and Pb-free on the same oven?

Extended CA RoHS Restrictions Terminated

Nov 6, 2007 | Extended CA RoHS Restrictions Terminated Extended CA RoHS Restrictions Terminated Good points Patrick. It really shows how little (if any) thought EU legislators put into the RoHS rules they came up with.

Extended CA RoHS Restrictions Terminated

Nov 5, 2007 | Extended CA RoHS Restrictions Terminated Extended CA RoHS Restrictions Terminated Does anyone know of any instance of a pending or successful prosecution in the EU in regards to RoHS legislation?

Extended CA RoHS Restrictions Terminated

Nov 5, 2007 | Extended CA RoHS Restrictions Terminated Extended CA RoHS Restrictions Terminated "Hasta la vista, RoHS."

RoHS Calculation

Oct 12, 2007 | RoHS Calculation The exempt request is still under consideration. Look at page 6 in following link. http://www.buyusa.gov/europeanunion/rohs_exemption_status_tracker.pdf

PB and PB Free on same screen printer

Oct 12, 2007 | therefore all of are going to be processing ROHS. May as well get

FR 406 not Rohs Compliant?

Jul 12, 2007 | FR 406 not Rohs Compliant? FR 406 not Rohs Compliant? Stephen, I'm hoping that that was the wording, as it makes the most sense. The Td being what it is would tend to make me think that it's a process consideration, rather than a RoHS consideration. Far as I can figure out, chemically, the material meets the RoHS

FR 406 not Rohs Compliant?

Jul 12, 2007 | FR 406 not Rohs Compliant? FR 406 not Rohs Compliant? I think you mean not ROHS process compatable.

FR 406 not Rohs Compliant?

Jul 11, 2007 | FR 406 not Rohs Compliant? FR 406 not Rohs Compliant? My boss just received some info through a design mailing list that he's on claiming that FR406 is not RoHS compliant based on the limited number of processing cycles at RoHS compliant temperatures. I would guess that this is related to the relatively low Td of FR406

ABC-2002 w/ RoHS Process

Jun 25, 2007 | ABC-2002 w/ RoHS Process ABC-2002 w/ RoHS Process Is anyone out there using a Unit Design ABC-2002 with a RoHS process? If so, what chemistry and concentration are you using and what kind of results are you seeing? TIA.

Leadfree assembly

Apr 17, 2007 | you should list down the part which are using leaded product before hand, at least both parties understand

Sn63Pb37 on RoHS compliant PWB

Apr 12, 2007 | Sn63Pb37 on RoHS compliant PWB Sn63Pb37 on RoHS compliant PWB We are running RoHS compliant & non RoHS compliant assemblies. We buy our bare boards from one supplier that only manufactures RoHS compliant boards using a Sn100 finish. Is there any known issues running leaded solder on a Tin finish? Does normal reflow and wave

RoHS Compliant component usage in Non RoHS process

Apr 2, 2007 | RoHS Compliant component usage in Non RoHS process RoHS Compliant component usage in Non RoHS process AFAIK TI has been totally ROHS compliant for at least 10 years. And you didn't hear complaints about them, OH wait a minute yes we did. You might have to go with a slightly hotter profile.

RoHS Compliant component usage in Non RoHS process

Apr 2, 2007 | RoHS Compliant component usage in Non RoHS process RoHS Compliant component usage in Non RoHS process I do this ALL the time, and it is pretty much transparent to the process. We have done shake, burn in, and functional tests with our products and we didn't have any issues what so ever. We have had a RoHS complient process for well over 18 months now and we haven't seen any field failures due to this either. So, it is pretty much a safe bet you'll be okay. We even have used Non-RoHS components in our RoHS process, but of course we can't state these boards are now RoHS compliant because of the Non-RoHS parts. You shouldn't have any issues

RoHS Compliant component usage in Non RoHS process

Apr 2, 2007 | RoHS Compliant component usage in Non RoHS process RoHS Compliant component usage in Non RoHS process What i want to know is If we are using RoHS compliance component in Non RoHS process means leaded process is there any solderability issue ?

Rohs and non rohs components on a board

Feb 19, 2007 | Rohs and non rohs components on a board Rohs and non rohs components on a board We use SnPb paste and bar with leaded and non-leaded component finishes. The predominant finish on components we use is Tin, there are a few NiPdAu. We've had no problems with the component finishes used in the SnPb process.

Rohs and non rohs components on a board

Feb 12, 2007 | Rohs and non rohs components on a board Rohs and non rohs components on a board Today is more complicate to find components with lead than with "lead free", and the, I think that you have very feww lead components. And, if don�t work on exceptionals companies, you MUST use LEAD FREE PASTE. In one case, or in the opposite, the result its

Rohs and non rohs components on a board

Feb 6, 2007 | Rohs and non rohs components on a board Rohs and non rohs components on a board If it is instructed to ship lead free product to customer, then low temp lead free solder paste can be considered. For example, Viromet solder paste from Singapore Asahi (peak temp is between 220 to 225 degree C).

Rohs and non rohs components on a board

Feb 6, 2007 | Rohs and non rohs components on a board Rohs and non rohs components on a board > Good afternoon, > > You have to use lead paste > since none-RoHS components won�t withstand > elevated temperatures. Solder paste manufacturers > offer a lot of transitional pastes designed > specially for mixed process. Ask your paste > supplier for transitional paste. > > BR, Pavel Non-ROHS parts are more likely to be capable of taking higher temperatures. ROHS parts have restrictions on what goes into them includeing certain fire retardents. Don't confuse ROHS compliant with ROHS capable. And don't trust

Rohs and non rohs components on a board

Feb 6, 2007 | Rohs and non rohs components on a board Rohs and non rohs components on a board Leaded paste, is what we use if the process or product requires it.

Rohs and non rohs components on a board

Feb 6, 2007 | Rohs and non rohs components on a board Rohs and non rohs components on a board ViVian, check the great SMT archives. Below is a good thread on this very topic. :-) http://www

Rohs and non rohs components on a board

Feb 6, 2007 | Rohs and non rohs components on a board Rohs and non rohs components on a board Good afternoon, You have to use lead paste since none-RoHS components won�t withstand elevated temperatures. Solder paste manufacturers offer a lot of transitional pastes designed specially for mixed process. Ask your paste supplier for transitional paste

Rohs and non rohs components on a board

Feb 5, 2007 | Rohs and non rohs components on a board Rohs and non rohs components on a board what type of solder paste I should use if Rohs and non rohs component mount on same board

DRS-22 for RoHS BGA rework?

Feb 2, 2007 | DRS-22 for RoHS BGA rework? DRS-22 for RoHS BGA rework? Hi All, Has anyone out there used an Airvac DRS-22 for RoHS rework on lead free BGA's?

China RoHS?? Say it ain't so!!

Jan 4, 2007 | China RoHS?? Say it ain't so!! China RoHS?? Say it ain't so!! *SCOFF*... *GUFFAW* Any "literature" that you get saying that RoHS is actually BETTER for the environment, is probably "all made up" with fake data, charts, graphs, etc. (a fat guy once told me that, that's all I know how to do..make fake data, charts, graphs, etc ...) If anything, there's mounds of data that support that RoHS actually WORSE for the environment!!

China RoHS?? Say it ain't so!!

Jan 4, 2007 | China RoHS?? Say it ain't so!! China RoHS?? Say it ain't so!! Well sure, the Chinese want to play mess up the world too!! This one has got to be power trip, and I would bet my bottom dollar that their RoHS only applies to import products. Russ

New to ROHS

Dec 18, 2006 | New to ROHS New to ROHS Thank you for the respones.

Hardware for ROHS builds

Nov 7, 2006 | Hardware for ROHS builds Hardware for ROHS builds Thanks for the links. I emailed them for quotes

Hardware for ROHS builds

Nov 7, 2006 | Hardware for ROHS builds Hardware for ROHS builds Gould in Canada has been good - claimed they could do traceability to their suppliers. Fastenal is willing to provide RoHS hardware - no traceability to their suppliers though. Kanebridge seems to be OK, I think, for RoHS hardware. Armour Screw Co. in the US has

Hardware for ROHS builds

Nov 7, 2006 | Hardware for ROHS builds Hardware for ROHS builds Basically I'm looking for nuts, bolts, and washers Thanks for the information. That will be very helpful. I did notice that the hardware companies are not as concerned with ROHS.

Hardware for ROHS builds

Nov 7, 2006 | Hardware for ROHS builds Hardware for ROHS builds If they are in medical why are they going with inferior ROHS products?

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

PCB machines

SMTA International 2017