|
| Subscribe to the SMTnet Express |
|
|
|
| Link to SMTnet |
| Tell everyone you know about SMTnet! You can add this small image to your Web site and provide a link to us. Click here to learn how. |
 |
|
|
|
 |
quad Electronics Forums search results
786 results found for quad in 3s.
Showing matching items 1 - 50
- 96%
Quad?? - 1/24/01 -
- Quad?? Here is the latest Press release. I do know Craig Ramsey VP, Marketing is no longer with Quad. last I saw the stock price was froze at $.38/share. My best guess is Quad will be consumed and re-released under a different name possibly the private label company Quad is in agreement with. Two other companies that were comsumed a while back were Zevatech (Juki- who is doing very well) and tenyru (I-pulse, to early to gauge). There is a need for the platform of machines Quad makes, I wish them ...
- 96%
Placement Equipment - 1/27/03 -
- ... did not build all Quad machines. QSA = Quad Samsung America, The QSA-30 machine platforms were manufactured by Samsung, utilizing Quad feeders, other Quad technology and Quad sales and service. Before the QSA-30 project, Quad had a similar agreement with Samsung with the 1000 unit, a mechanical centering machine. All other platfroms QS-100, 2000, IIc, IVc, QSV-1, QSX-1, QSP-2, and the APS models were (and are) manufactured by Quad in Willow Grove, PA. In the later part of Quad's existence they ...
- 94%
Quad - 1/24/03 -
- Quad QSA series was a joint project, but Quad machines still use feeders made by Samsung, or Samsung makes the feeders Quad designed (whatever). QSoft has two different evolutions, Qsoft(1) went to Samsung, and Qsoft(2) stayed with Quad. I'm sure they have made changes since the original split in information sharing. Now Quad is NO MORE. It is Tyco Automation Group. They just haven't come up with any more new machines to replace their Quad holdings (as well as others), so they continue to ...
- 93%
Re: Check out a new Q - 11/12/98 -
- ... 8500 for 8. That is over $1000 per feeder. Mixed magazines (required for flexibility) can be very expensive. Quad 8mm and 12mm feeders are all less than $750. | 5. No Quad machine requires fiducials to build a board. | | More to come at Nepcon West... See you there! | | I have a strange feeling the above response may have been from a Quad employee. My company purchased a Quad QSP2 a little over a year ago and has not been too pleased. We've had repeated problems with consistency of placement ...
- 92%
Quad System and Tyco Info - 8/7/01 -
- Multitroniks, Quad System and Tyco Info I and my fellows have been long term customers of Quad and recently purchased the nineth, I think, Quad machine a QSV as well as two stencil printers in the recent past. My experience with the Quad Corporation has been outstanding in terms of customer service and machine performance. Accuracy is as advertised. I am very concerned that Quad service and support continue as I have known it. I await the next new improvement in robotic equipment that they may ...
- 92%
Quad System and Tyco Info - 8/3/01 -
- Multitroniks, Quad System and Tyco Info The press release attached below provides some insight into the direction Tyco is planning to head with the Automation Group. For Immediate Release Tyco Electronics Expands Automation Group; Offers Quad Systems Assembly Equipment Quad Systems is now a part of the rapidly growing Tyco Electronics Automation Group. George Szekely, General Manager of the Automation Group, said the addition of Quad brings in-house one more element of its end-to-end electronics ...
- 92%
quad qsv-1 gantry - quad align issues - 1/23/08 -
- quad qsv-1 gantry - quad align issues Help! Since last Friday i have been having issues with a Quad qsv-1, it all started with a quad align error, i found there to be a small quantity of grease covering the lenses on both quad align sensors. I wiped the grease off and then everything seemed to work fine, until monday. After I finished the job I was working on I loaded the next job and received a Qsoft.exe error, a page fault or something I don't remember anymore. I replaced the calibrat.cfg file ...
- 91%
looking for opinion - 10/31/05 -
- ... quick decision. Are there machines offered on this forum? Because of the number of feeders I have I would like to stay with a compatable Quad. Having a knowelegable person available is a must. I don't mind paying a reasonable fee for help. $150/hr plus travel and boarding for a Quad tech is out of the question. I got the old Quad 100 working with help from Quad but from reading your post that's not available now. BTW is the latest version of Central Controller available from someone on this ...
- 91%
Quad Machines? Good Points / Bad Points - 5/2/02 -
- Quad Machines? Good Points / Bad Points I have a Quad QSP-2 for 5 years and I have had no problems with it. We run it 16 hours per day 6 days a week. Software is good. Service is excellent Quadcare is expensive. The only drawback that I see is tapefeeder repeatability. Seems that the part centers drift and have to be recentered frequently. This is my sixth Quad machine since 1986. You can not classify the Quad with Panasonic, Fuji, Sanyo or Siemens. Quad is an accurate, well built low volume ...
- 91%
Quad System and Tyco Info - 8/6/01 -
- Multitroniks, Quad System and Tyco Info Quad and Multitroniks have capable machines. The merge has created some issues and concerns. The biggest issue is logistics and support. Quad is at bare bare bones. I know the last Quad product manager left 4 months ago. Also, Mirae Split from Quad in Jan and has a product line starting from entry level to "High-end" machines. Tyco is new with SMT machines. Multitroniks will be relocating to Quad facility here in Pennsylvania. So issues and obstacles I see ...
- 91%
Re: Philips vs. Quad - 3/18/99 -
- ... Moon | | Ray, | | I have some "difficult" experience with Quad. To be quite frank, just about any machine would be better than a Quad. Just a few examles of poor customer service displayed by Quad. | | 1. Releasing a software version with more "bugs" than the previous version. | 2. Fixing a "common" problem with the machine, and not informing the customers they have a fix for the problem. | | Send me email and I'll talk you out of a Quad. | | Andy Norton | Andy: Your experience(s) with a vendor ...
- 91%
looking for opinion - 11/1/05 -
- Quad 1000, looking for opinion Please note your post title, " Quad 1000, looking for opinion". This is not your usual self-affirmation comittee. You asked for opinions. You got an opinion from soneone well versed in this industry (18 years) with no personal gains to be made from spare parts, services or equipment sales. I made No wild boasts about delivering the world or challenging (insert platform name here) vs. quad or like wise. But you Quad guys are rabid in your opinions about quads. And ...
- 91%
Quad Laurier Die Feeder? - 2/8/01 -
- Quad Laurier Die Feeder? DAVE F. Far be it for me to correct you, it is not my place. I just want to Calibrate your GPS a little. The short and sweet version- Quad was to sell Samsung machines under a private label. All was ok until Quad released a machine to compete with Samsungs machine and things got sticky from there. Quad has cut its ties with Samsung (or vise versa) about 1.5 years and now private label machines from Mirae (
- 90%
looking for opinion - 11/2/05 -
- ... I bought two Quad 100s and got one working. For $15,000 I got the two machines and 50 feeders. I considered the feeders the more valuable part of the purchase. If I found a different make of machine with feeders at a price I could afford I would definately change. The reason I'm looking at Quad is because of the feeders I already have. Another problem is I'm not in a good location (Oklahoma City) for finding machines. I previously relied on a dealer to find the Quad I have now and that turned ...
- 90%
Quad Laurier Die Feeder? - 2/7/01 -
- Quad Laurier Die Feeder? I used a Die feeder from Delaware Technologies for our Quad machine. We have not had Quad in our factory for over a year now so most of my knowledge is geared towards the older Quads. Don Dawson at Delaware Technologies can help. 609-235-8454. I am curious on your Quad selection for flip chip, please provide some more info on you machine selection and justification. Sorry I cant help with your Laurier question. Best regards, Cal Quad Machines? Good Points / Bad Points - 5/2/02 -
- Quad Machines? Good Points / Bad Points I don't have Quad machines but I would like to say that all Quad machines are not manufactured by Quad. IIC, IVC, QSP-2, APS-1, QSX, AVX are Quad. CP series are Samsung. Meridian series are Mirae. The reliability and ease of use of these models may vary with manufacturer. Know what model numbers you are considering and check their histories ...
- 90%
Re: Quad vrs. Mydata - 11/9/98 -
- Re: Quad vrs. Mydata I have had experience with both companies. If you are doing contract work and get you parts and boards in a box, the Mydata does a fine job of teaching a board on the machine. Quad's strengths are in their software and the ability to automatically program a board from CAD data or using a digitizer. Quad's networking capability is far superior if your company runs a Windows based LAN. Quad's individual feeders are much more flexible then the bulk magazine concept unless you ...
- 89%
quad 1000 error - 5/16/05 -
- quad 1000 error Are you sure you dont mean quad 100. The software for a quad 1000 (which was a samsung machine) was not available on disks or to install......I dont recall ever seeing it on a disk. If its a quad 100, you would need version cc5.6d central controller software. I am sure someone out there has that and could send it to you ...
- 89%
Where can I get Quad AVX-500 spare parts - 4/6/04 -
- Where can I get Quad AVX-500 spare parts Try these guys too: http://www.sigmaprint.co.uk/ Regardless, the parts are most likely stocked only in the U.K. Your machine was orginally manufactured in the U.K. by a British company called SMTech. SMTech was purchased by Quad and then sold to Speedline Technologies- MPM. However, depending on the mfg. date, it may have a Speedline Technologies- MPM tag. The AVX-500 was renamed the ...
- 89%
Check out a new Q - 11/11/98 -
- ... wafer presentation for die attach? Mydata shares this market with Quad and I think that both the IVc and TP series machines serve the market well. Times have changed and Quad again leads the industry by adapting many semi-conductor based technologies into general purpose SMT equipment. The new machines address the issues outlined in your commentary: 1. It is important to have a conveyor between the P&P and oven. 2. Quad has offered a strip feeder plate for 4 years now. 3. The QSV machine has 50 ...
- 89%
Re: Quad vrs. Mydata - 11/10/98 -
- Re: Quad vrs. Mydata | We are currently in the process of purchasing a new low volume SMT line. Based on our research, Quad and Mydata seems to best fit our applications. Has anyone used both equipment and experience the pro and cons of each machine? Thanks in advance for any information you can provide. - Jim | I've had a Quad IVc at Interstate and have purchased a Mydata here at Murrietta Circuits. I've had frustration with that particular Quad in the past with several issues hence why I ...
- 89%
Re: Philips vs. Quad - 3/16/99 -
- ... experience with Quad. To be quite frank, just about any machine would be better than a Quad. Just a few examles of poor customer service displayed by Quad. | | 1. Releasing a software version with more "bugs" than the previous version. | 2. Fixing a "common" problem with the machine, and not informing the customers they have a fix for the problem. | | Send me email and I'll talk you out of a Quad. | | Andy Norton Andy, Please inform me as to your dissatisfaction with Quad support. I am concerned ...
- 89%
looking for opinion - 10/31/05 -
- Quad 1000, looking for opinion Dave, The quad 1000 was a samsung machine with quads name on it......the software sucks and it is totally different from central controller. If you go for a machine....go for a 2c r 4c if you still want to use the same feeders. Chip shooter means 0805 or 1206 parts but certainly not fine pitch. Also the part centering on a quad 1000 is still manually done and not done with laser centering. Unless you are getting it for close to nothing......i would say no thanks ...
- 89%
QUAD 4C T axis - 7/31/08 -
- QUAD 4C T axis I agree with RLM. What i have seen is that quad had a problem with the gounding system of the quad align unit. An additional ground wire was added at the quad align cage,and to the PCB located inside the front right access panel. I don't have a machine in front of me anymore to look at so i can't give you anything more to go on ...
- 89%
looking for opinion - 11/1/05 -
- Quad 1000, looking for opinion Dave, Dont mind Ken.....in the past he just hired the wrong ex-quad guy previously that couldnt get his machines working right......anyways.....if you want to keep the same feeders you would need a 2c or 4c....the centering should be a quad-align but older machines used cyberoptics which worked ok. For all the specifics....talk to Tom Nisbit....at Precision Placement Machines.....they sell used quad stuff....at a good price. And please Ken....i dont want to argue ...
- 89%
Rating SMT Machines - 10/21/02 -
- Rating SMT Machines Hi I have work with different brands Fuji, my data, quad, Panasonic. In my experience as a programmer/operator/maintenance (trouble shooting). After working with OEM and CM. I still like Fuji over the other brands Customer support: Fuji 1 Quad 2 Panasonic 3 Mydata no comments Equipment performance Fuji 1 Panasonic 2 Quad 3 Mydata 4 Change over Fuji 1 Panasonic 2 Quad 3 Mydata 4 I will like to tell you about programming but There is nothing to compare. Using UNICAM & GERBCAM ...
- 89%
Quad Machines? Good Points / Bad Points - 5/3/02 -
- Quad Machines? Good Points / Bad Points Gregp hit the nail on the head.Some of Quads Platforms were of the private label but Samsung and Mirea are no longer partners with Quad. Samsung and Mirae are independant now in the market. Machines made by Quad are stable.I do not know how Multitroniks machines have performed since coming under the Tyco umbrella. Quads target is the mid range manufacturer and Siemens, UIC, Pannasonic. Fuji are concidered upper end. Assembleon bridges the mid to upper ...
- 89%
Re: Quad Off line programming Problems - 9/21/99 -
- ... I am Checking into it, however have you attempted to contact Quad for assistance? It might be your shortest point to sucess, hopefully. | | | | | | Will keep you posted as I gather the information. | | | | | | Good luck in the meantime. | | | | | | The Guc | | | | Wendy, | | | | I dont care what version of the QUAD GUI software you have. But I do know that there are bugs in almost everything Quad puts out, I'm about 5/5 in quad equipment installs. To be more specific and to prove a point, go ...
- 88%
New Pick and Place Operation - 6/3/04 -
- New Pick and Place Operation My Machine guy was a 4 year ex-quad Service Engineer. Prior to that he spent 6 years in a CM programming and servicing quads from QX toQ3c/4c q100 series. These are opinions. Nothing more. I have noticed that the smallest players in the market seem to have a viciously devoded following...especially when dealing with quads. I am fortunate and don't have to justify any quad purchases by defending them. I would (and have) been equally as critical to other manufacturers ...
- 88%
Advice on used pick and place machine - 10/9/06 -
- Advice on used pick and place machine Phil, The QSA-30 was built by Sam Sung, Sold by Quad. Single Head 2 Nozzles around 11K CPH Quad does not support the machine but I believe you can get parts direct from Sam Sung. I am not sure if they have a registration fee. The QSA used Quad made Quad Aligns scanner. They will handle 0402's. Most QSA did not have upward camera. It was a good machine but parts & service are and will become more of a problem. Software was not soo good. If you can live with ...
- 88%
Quad Laurier Die Feeder? - 2/7/01 -
- Quad Laurier Die Feeder? Since, 1996, Samsung has been the sole supplier of Quad component feeders. And I believe Samsung is the developer and producer of Quad?s Meridian placement machines. Quad has been fighting with Samsung for over a year [http://www.quad-sys.com/investor/000411_arbitration.htm]. So to get out of those and other obligations, Quad recently requested Chapter 11 bankruptcy ...
- 88%
Surface mount Machines - 2/20/05 -
- Surface mount Machines HI Brad, I'd stick with QUAD, I believe they are no longer known as quad. It's what you know, a different brand would mean learning it and the time to do so. I've never seen any problem with QUAD, that could not be resolved. The C series is kinda old, but I've seen them place small small parts, smaller than 0603 anyhow. These QUADS are ideal for LOW VOLUME HIGH MIX. I've had at times 3 diffent jobs running on two sepparate machines. Change outs are a snap with all your ...
- 88%
quad parts - 2/24/98 -
- FS Quad 100 v3v6,Accu-Heat oven,dehart printer,quad parts EQUIPMENT FOR SALE QUAD 100 V3/V6 Low hours, Excellent condition, All latest factory revisions Firmware 3.65 Central controller software 5.6D with computer system Autoprogram software 5.31 1- 28" Latching feeder base 5- 4" Latching feeder base 2- Bolt down vib bases 5- Chuck bases 5- Compliant chucks 1- Vision nozzle base (dual) 2- Vision nozzles Transport system New style muti-line handheld Feeders Available Accu-heat oven ...
- 88%
Re: Quad Off line programming Problems - 9/15/99 -
- ... I am Checking into it, however have you attempted to contact Quad for assistance? It might be your shortest point to sucess, hopefully. | | | | Will keep you posted as I gather the information. | | | | Good luck in the meantime. | | | | The Guc | | Wendy, | | I dont care what version of the QUAD GUI software you have. But I do know that there are bugs in almost everything Quad puts out, I'm about 5/5 in quad equipment installs. To be more specific and to prove a point, go back to your p100 sys ...
- 88%
Re: Quad Off line programming Problems - 9/14/99 -
- ... Thanks, | | Wendy | | | I am Checking into it, however have you attempted to contact Quad for assistance? It might be your shortest point to sucess, hopefully. | | Will keep you posted as I gather the information. | | Good luck in the meantime. | | The Guc Wendy, I dont care what version of the QUAD GUI software you have. But I do know that there are bugs in almost everything Quad puts out, I'm about 5/5 in quad equipment installs. To be more specific and to prove a point, go back to your p100 ...
- 88%
Researching placement machines - where do I start?! - 11/9/09 -
- ... The older Quads had the Quad Align system which is laser vision. It is ok for non leaded parts but not so great if you had leaded parts. There is no direct CAD input into a 2c or 4c and it is a dos based system. The 7722FV has a windows based operating system, direct cad input. You also do not get the 1 year warranty with a Quad like you do with the 7722FV. We even offer extended service contracts that cover parts 100% for years 2,3 and on. The other thing to really think about is Quad is no ...
- 88%
Quad Machines? Good Points / Bad Points - 5/2/02 -
- Quad Machines? Good Points / Bad Points Hello, BUY Juki! Trust me on this one, I have experinced both and I may change careers if I find out I'm going to support another Quad line. There is a reason why that company struggles every year. Quad is not in the same market with the Fuji and Panasonic. Juki has it's own little issues, but far, Far better equipment than the quad equipment. 1. Programming (ease or difficult) 2. Maintenance (how much upkeep to keep them fully functional) 3. Calibrations ...
- 88%
Quad System and Tyco Info - 8/1/01 -
- Multitroniks, Quad System and Tyco Info > Jay, > > I agree with your assement and Chips on > the Quads. I once worked at a shop that had Quads > and DynaPerts(at the time) The perts were > slower(TIME) and required(EFFORT/PEOPLE) more > MAINTENANCE(more effort more people and more > requirements!!!). I've worked with mostly Quads > myself..IIIc Quad2000, QSV, QSP-2, APS-1H(wafer > presentation). I love 'em!! I feel I must come to the defence slightly of Multitroniks ...
- 88%
Quad System and Tyco Info - 8/1/01 -
- Multitroniks, Quad System and Tyco Info Jay, I agree with your assement and Chips on the Quads. I once worked at a shop that had Quads and DynaPerts(at the time) The perts were slower(TIME) and required(EFFORT/PEOPLE) more MAINTENANCE(more effort more people and more requirements!!!). I've worked with mostly Quads myself..IIIc Quad2000, QSV, QSP-2, APS-1H(wafer presentation). I love 'em ...
- 87%
Quad IVc power up - 4/14/09 -
- Quad IVc power up Thank you RLM, bobpan, Laser (CyberOptics) was dirty! Now is all OK. You are talking about Quad-Align. I have a lot of QUAD manuals and I still do not understand the diference among QuadAlign, CyberOptics LA and L3 LA! Please, if you can give me some notice. Best regards, MK
- 87%
Quad IVc power up - 4/12/09 -
- Quad IVc power up Hello, I bought used QUAD IVc MKII with transport in "as-is" condition, powered it up (without air and PCB on machine) and all axes (X, Y, Z AND T(heta)shows signs of life. Machine is performing HOME positioning self test. I am not familiar with QUAD machines and I am not sure am I doing something wrong or there is some error on the machine. While machine is performing power up self test sequence Laser Align, Z-axis, Y-axis, X-axis all pass (HHT) but machine stops (freez) on T ...
- 87%
QUAD 4C T axis - 3/25/09 -
- QUAD 4C T axis My Quad IVc's will also do the same thing. Mine are equipped with CyberOptics scanners, not QuadAlign. The Cyberoptics scanners do go bad and once they do, they get very warm to the touch and at the same time, if the Quad is reset, the theta axis will not home until I cool off the scanner with a small fan (or a can of blow-off turned upside down and blasted at it to cool it). Once cooled off, the theta axis homes and the machine runs good. It is never a problem when first powered ...
- 87%
quad qsv-1 gantry - quad align issues - 1/23/08 -
- quad qsv-1 gantry - quad align issues Additionally, I have seen the bad align error from incorrect pickup Z. Quad align can freak out sometimes if it sees something it doesn't like. If all else fails I just reboot and 99% of the time the problem goes away ...
- 87%
Quad QSA Equipment Support - 10/29/07 -
- Quad QSA Equipment Support After leaving the electronics industry for 5 years, I have finally found my back into it. Obviously, 5 years is a long time and we all know that things rapidily change within the industry. The company that I have joined are looking to invest in 2 Quad QSA 30 pick & place. I know that Quad were bought out by Tyco, who then started selling Mirae equipment. My concern is that we may struggle in technical support for the Quads. Can anyone offer information on any technical ...
- 87%
quad 1000 error - 5/16/05 -
- quad 1000 error Hi Bobpan, I would like to know if you have access to the original Quad 1000 software? I have an operator who "updated" the configuration software on the Quad and hosed it up ...
- 87%
quad 1000 error - 5/16/05 -
- quad 1000 error Hi C.B, I have been doing some repairs on a Quad 1000 and I am getting to know it better that I want to. My comapny is located in San Jose, CA and I can offer you on site support if you are in the area. I also had an operator "update" the configuration file on the machine. I am looking for the original software for the Quad 1000. Do you have this? Are you willing to send me a copy? Please let me know ...
- 87%
Quad ZCR oven password - 4/4/05 -
- Quad ZCR oven password Passwords for the ZCR / QCR did change with the version of S/W. I believe that from version 2.9 onwards the password to start the S/W from the DOS prompt is "quad" [all lower case]. Pre version 2.9 please type "zcr" [All lower case]. This will enable you to start the S/W from the "please press space bar restart" message. Once in the S/W if the process password has been enabled, you will have to enter it before you can edit any process parameters, factory setting is "quad ...
- 87%
Quad ZCR oven password - 3/28/05 -
- Quad ZCR oven password ya...i know.....still not quad though.....a shell of quad......tx anyways
- 87%
Quad System and Tyco Info - 7/31/01 -
- Multitroniks, Quad System and Tyco Info In the past I have spoken to Multitronics sales reps and looked into the product line. I saw their equipment more suited for a smaller "mom and pop" type shop, I work for a mid size contract house and it wouldn't have come close to meeting my needs. I currently have a Phillips line and a couple of Quads 2c machine and a QSV, I am personally looking forward to Quads' engineering types to have backing from a large company (with deep pockets)to persue ...
- 87%
Remote Camera Box for QUAD lllc/IVc - 6/19/00 -
- Remote Camera Box for QUAD lllc/IVc I'm looking for a Remote Camera Box for QUAD C series machines. Quad sells this in a kit (Box and Camera). I just need the Box. Can someone tell me if there's any CO. where I can buy just the Remote Box itself alone ...
Results
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
|
|
|
Back to the Top
