overspray

"overspray" search results in the Electronics Forums



7 results found for "overspray" in the Electronics Forums

Order by: Relevancy |   Date

Selective Solder Recommendations

Jul 2, 2008 | zebra strip contacts are good with this flux residue and overspray (took a while to find what works). This flux also has proven to not cause the pump to dross up prematurely. They don't tell you that the flux will -drastically- change how quickly the pump dross up. Currently we manufacturer around 20

Selective Solder Flux Issue

Aug 17, 2006 | Any materials that come in contact with the flux should be made from stainless steel, titanium, or plastics. These materials will not corrode from OA fluxes. Overspray is an issue. I think Pillerhouse has that jet fluxer, so I don�t think there is much over spray. The OA flux will corrode metals

Reflow Oven Chain Lubrication

Oct 14, 2002 | Mike, we use a product called Dow Corning 321 dryfilm lubricant. BTU reccomends it. You can find it in Mcmaster Carr for about 21.00 a can. Mcmaster PN is 1255K14. I reccomend pulling the chain off when you are lubricating it to avoid over-spray. This lubricant works very well because it is a dry

Sensbey Spray Fluxer

Aug 1, 2002 | I had a 1995 SENSBEY MXL-400J at the last place I worked. I had very good results- easy to setup, run and maintain. It has a paint gun type spray head. Good idea to have spares cause they can clog. I sprayed a Multicore NC flux. Only downer was a fair amount of overspray- up the stack. Rock solid

VOC free flux wave solder fixtures

Jul 6, 1999 | comments would be appreciated..... | | | | | | thanks | | | | | | Kelly, | | | | I run VOC on all wave soldering and have had no problem's with the pallet's at all. | | Occationally you get a build up from overspray but you can clean it off, alpha do a wipe for cleaning VOC off, I can't remember

VOC free flux wave solder fixtures

Jul 6, 1999 | be appreciated..... | | | | thanks | | | | Kelly, | | I run VOC on all wave soldering and have had no problem's with the pallet's at all. | Occationally you get a build up from overspray but you can clean it off, alpha do a wipe for cleaning VOC off, I can't remember the name but it's definately

VOC free flux wave solder fixtures

Jul 6, 1999 | be appreciated..... | | thanks | | Kelly, I run VOC on all wave soldering and have had no problem's with the pallet's at all. Occationally you get a build up from overspray but you can clean it off, alpha do a wipe for cleaning VOC off, I can't remember the name but it's definately in the archive's cos I

Non-heated dispensing system

SMT Prototype Stencils - BEST, Inc.