Electronics Forum | Fri Oct 19 10:02:34 EDT 2012 | ericrr
First, why is there appears to be no marking on simple capacitors when there is a code for, yet there is markings on resistors? Attached is a interesting table, it came about after I spent hours and hours and hours looking on Internet from a 16 Volt
Electronics Forum | Thu Jul 22 04:53:54 EDT 1999 | George Verboven
| Looking for a cross-referencing and part identification guide for surface-mount components. There is very little infomation provided on some of the components themselves, and we often don't have parts lists or schematics for items we repair, so ide
Electronics Forum | Fri Mar 23 08:46:09 EDT 2012 | rwyman
I think you need some new suppliers. Any reputable supplier will have the M-code marked on the outside of the pkg, as that's a req't of J-STD-033. So if it ain't there, tell them they need to properly mark the pkg. Them telling you to "check the i
Electronics Forum | Thu Dec 05 14:04:58 EST 2019 | slthomas
It just looks like a transformer, as had been mentioned earlier, but w/o a part number (usually the parts are marked with some ID code) it's hard to know for sure. If that's the case and what we're seeing is one of the leads for the windings that c
Electronics Forum | Tue Mar 20 15:59:15 EDT 2007 | blnorman
We use preprinted labels and laser coding. For PCB we laser mark with CO2 (NdYAG for the aluminum heat spreaders). We either have an epoxy legend to burn out or we burn the solder mask to expose the copper ground plane underneath. Laser is a much
Electronics Forum | Tue Jan 05 14:37:18 EST 1999 | Dave f
| I would like to know if it exist a croos reference book for marking code on smt device? | I'm fixing a unit now and try to know what are the following devices: | The look like transistors and are mark like that "8A" |
Electronics Forum | Sat Sep 29 02:58:18 EDT 2012 | ericrr
I tried to look for "H890" on Internet and went nuts, (Thanks to Google) I would think H890 is part of a diode manufacturer part number. Have you tested it for a diode function? or maybe you have this is why you want a replacement. Tantalum capacito
Electronics Forum | Tue Aug 30 11:23:07 EDT 2005 | g2garyg2
AJ, there are a variety of laser marking systems in the marketplace. Most use a CO2 laser to mark PCBs. Since laser life is directly related to power available vs power used, you should try to get a system with a 30 watt power rating. Most marking i
Electronics Forum | Thu Feb 17 22:30:09 EST 2000 | Dave F
Alberto: There's no rules, but it works sorta like this: RESISTORS Usually marked in ohms using a standard code: First two numbers is the value Third number is the multiplier 102 = 1.0 x 10� ohm = 1000 ohm = 1 kW CAPACITOR Usually not marked. When
Electronics Forum | Thu Feb 17 22:30:09 EST 2000 | Dave F
Alberto: There's no rules, but it works sorta like this: RESISTORS Usually marked in ohms using a standard code: First two numbers is the value Third number is the multiplier 102 = 1.0 x 10� ohm = 1000 ohm = 1 kW CAPACITOR Usually not marked. When