Electronics Forum | Fri May 25 03:28:20 EDT 2007 | shparekh
Hi All, Brand new here. I am wondering if I can find a breakout board for 0.4mm pitch SMD connectors. TIA. -sanjay
Electronics Forum | Fri May 25 08:11:22 EDT 2007 | davef
Welcome. Look here: http://www.smtnet.com/forums/Index.cfm?CFApp=1&Message_ID=28950
Electronics Forum | Thu Nov 14 10:52:56 EST 2019 | jandon
Maybe something like this could work?
Electronics Forum | Tue Nov 12 00:49:37 EST 2019 | myke03o
I am optimizing a stencil opening for BGA with 0.4mm pitch and pad diameter of 0.2mm. Can anyone advice of stencil thickness and stencil opening I can use in order to have a good paste release. Thanks for all your answers.
Electronics Forum | Thu Nov 14 18:25:07 EST 2019 | myke03o
Hi Jandon, Thanks, I will try it on my DOE.
Electronics Forum | Thu Nov 14 21:47:41 EST 2019 | sssamw
Yes, 0.25x0.25 square could work @0.1 thickness, use nano-coating or electroform stencil for better solder paste release.
Electronics Forum | Thu Nov 14 22:24:43 EST 2019 | dman97
Use a type 5 solder for maximum paste release.
Electronics Forum | Tue Jan 30 15:30:17 EST 2001 | dason_c
Please check what is the actual pitch size. I found some of the designer use 15.7 mil pitch and no accumulate ie 15.7, 15.7 and 15.8...... Also, I recommended the pad width should be 10 - 11 mil for 0.4mm pitch. You can open the 10 - 10.5 mil aper
Electronics Forum | Tue Jan 30 07:55:31 EST 2001 | ibi
I will have to process a PQFP 128 with a pitch of 0.4 mm. Given that the width of its leads are about 0.13-0.23 mm, i dread the worst when printing the solder paste. So, i would like to know if some people have yet test this type of fine pitch, what
Electronics Forum | Sat Feb 10 18:33:52 EST 2001 | arturoflores
check the archives (keyword="16 mil pitch") and also consider 45 degree pattern printing. Regards.