Testronics 504 AOI Views: 1741

Testronics 504 AOI	Eric G	10/15/09
Testronics 504 AOI	CL	10/21/09

Email This Page to a Friend

Date: October 15, 2009 07:00 PM
Author: Eric G  
Subject: Testronics 504 AOI

I started a new company that has a Testronics 504 AOI machine. No one knows how to program it, and they can't find the manual. So far I have been able to load a centroid file, and set the board size. However, when i load everything, all my parts are located off the board and i have to manually align them. Once i get that done, i add the parts to the library, but i am unable to change to roi inspection size for each part. So right now, it just looking for a very small area on each component and not the whole component. What am i doing wrong, or not doing? any input will be helpful

Thanks

(http://www.smtnet.com/distributed_forums/Index.cfm?CFApp=8&Message_ID=60124)

---

Date: October 21, 2009 12:18 PM
Author: CL  
Subject: Testronics 504 AOI


Eric,

Here is the link for Testronics support. They should be able to get you a manual.
info@testronics.com
Chris

(http://www.smtnet.com/distributed_forums/Index.cfm?CFApp=8&Message_ID=60156)