High-end SPI and AOI? Views: 916

High-end SPI and AOI?		kudamarani08	10/13/09
High-end SPI and AOI?		MikeS	10/13/09
	High-end SPI and AOI?	kudamarani08	10/13/09
High-end SPI and AOI?		C.P Company	10/13/09
	High-end SPI and AOI?	edmaya33	10/14/09

Email This Page to a Friend

Date: October 13, 2009 08:09 AM
Author: kudamarani08  
Subject: High-end SPI and AOI?

Can anyone help me recommend or simulate a SPI and AOI machine that can balance our FUJI NXT 1 with 14 modules. We are using MPM accela printer. 200 UPH is our target.

Here's the PCB dimension

length(x) = 399.92mm
width(y) = 141.626mm

Thanks all!

(http://www.smtnet.com/distributed_forums/Index.cfm?CFApp=8&Message_ID=60099)

---

Date: October 13, 2009 04:11 PM
Author: MikeS  
Subject: High-end SPI and AOI?


Not sure how many inspections need to be done at 15 - 20sec total per board, but you may need to install multiple SPIs/AOIs to hit your takt time.

Mike

(http://www.smtnet.com/distributed_forums/Index.cfm?CFApp=8&Message_ID=60105)

---

Date: October 13, 2009 08:13 PM
Author: kudamarani08  
Subject: High-end SPI and AOI?


Hi Mike,

it must be 100% machine inspection.

Thank you.

(http://www.smtnet.com/distributed_forums/Index.cfm?CFApp=8&Message_ID=60107)

---

Date: October 13, 2009 10:56 PM
Author: C.P Company  
Subject: High-end SPI and AOI?


> Can anyone help me recommend or simulate a SPI
> and AOI machine that can balance our FUJI NXT 1
> with 14 modules. We are using MPM accela printer.
> 200 UPH is our target.
>
> Here's the PCB
> dimension
>
> length(x) = 399.92mm width(y) =
> 141.626mm
>
> Thanks all!

If you need an inline SPI and an inline AOI later on,
please contact us.

We have currently Cyberoptics SE300 and KS-Flex 12M.

Thank you very much.

Sincerely Yours

Casey Park
C.P Company

(http://www.smtnet.com/distributed_forums/Index.cfm?CFApp=8&Message_ID=60108)

---

Date: October 14, 2009 08:39 AM
Author: edmaya33  
Subject: High-end SPI and AOI?


Anybody here work with Viscom S3088-II QS SPI?
I heard this machine offers an ultra high speed of inspection and a state of the art features.


We have been working with Orbotech P36+ but all we got is headache. A 2K US$ illumination board always fail after a 24/7 operation. Plus the fact that the SPI family of Orbotech ceased its development.




(http://www.smtnet.com/distributed_forums/Index.cfm?CFApp=8&Message_ID=60110)