Selective Wave soldering machine Views: 1458

Selective Wave soldering machine		kircchoffs	10/12/09
Selective Wave soldering machine		dyoungquist	10/12/09
Selective Wave soldering machine		Startronic's Group	10/15/09
	Selective Wave soldering machine	SWAG	10/15/09
Selective Wave soldering machine		FB in AZ	10/20/09

Email This Page to a Friend

Date: October 12, 2009 02:50 PM
Author: kircchoffs  
Subject: Selective Wave soldering machine

Hi,

please recommend a good selective wave machine which is fully automated and can run a conventional solder and selective solder in 1. im currently looking at Ersaflow.

thanks

(http://www.smtnet.com/distributed_forums/Index.cfm?CFApp=8&Message_ID=60095)

---

Date: October 12, 2009 04:01 PM
Author: dyoungquist  
Subject: Selective Wave soldering machine


Check out RPS Automation. We have had good results with their selective solder machine that we purchased 1 year ago and they have wave nozzles as well in the 4-8 inch range. Changing from a selective solder nozzle to the wave nozzle takes only a few minutes (plus warm up time for the solder pot). rpsautomation.com

(http://www.smtnet.com/distributed_forums/Index.cfm?CFApp=8&Message_ID=60096)

---

Date: October 15, 2009 06:10 PM
Author: Startronic's Group  
Subject: Selective Wave soldering machine


We have recently acquired a Pillarhouse Jade machine which has changeover pots from Pb Free to Pb and the bath it small so changeover heatup is fast . Although it's runtime is slow it seems to run the product well.We are also running an Ebso 400 but the changeover pot takes some time to heat up .

(http://www.smtnet.com/distributed_forums/Index.cfm?CFApp=8&Message_ID=60122)

---

Date: October 15, 2009 06:31 PM
Author: SWAG  
Subject: Selective Wave soldering machine


You should take a look at these guys, also:
www.ace-protech.com
We have one of their machines and its been great.

(http://www.smtnet.com/distributed_forums/Index.cfm?CFApp=8&Message_ID=60123)

---

Date: October 20, 2009 07:26 PM
Author: FB in AZ  
Subject: Selective Wave soldering machine


I think machine selection depends upon your application (pitch, volume, changeover from pb to pb free etc...)

I have experience with ERSA and Pillarhouse Jades. Both very good in their own right. Pillarhouse are relatively cheap, and quick to change out pots, but buy 2-3 machines for each operator as run times will be longer and no conveyor system. ERSA machines are very customizable, and thus can be very cumbersome to install, program and maintain. Be careful with this one...buying cadillac with all bells and wistles will require more technical support.

(http://www.smtnet.com/distributed_forums/Index.cfm?CFApp=8&Message_ID=60148)