Motorized PCB Separator MDS-508-500/509-500

Motorized PCB Separator MDS-508-500/509-500 Description:

Motor-driven MDS-508-500/509-500 separates v-scored PCBs without stress to boards, components or solder joints. It is suited for medium to high-volume production. Cut length is fully programmable; programmed length is displayed on an LED readout.

MDS-508-500/509-500 Motorized PCB Separator Features:

• With completely independent development and controlled by micro-computer process, the machine is very accurate and stable. It can cut a single board within the length from 0 to500mm off with a cut.
• The feeding speed is adjustable with 500mm/s and 300mm/s. If the speed is fast enough, the quality is improved for the board is cut without burrs and rough selvedge.
• The feed distance of the knife wheel is from 0 to 500mm(the tool length can be customized ). The height of the knife wheel is fine-tuning from 0 to 2mm,so that it is suitable for PCB of various kinds of thickness and the depth of V-CUT groove. The height of work station is regulable from 0 to 50mm.
• The forward and stop point can be set according to the plate length when feeding, the stop point for manual setting.
• The tailgate depth range: unlimited. The largest plate cutting width: unlimited,the maximum cutting length: 500mm, the plate thickness: 0.25-5.0mm. The thickness between V groove: 0.25-2.0mm.
• The upper and lower knives is made of imported high-speed steel material,which are durable and can be regrinded.be adjusted precisely.
• The machine can be in supporting use of a complete set of conveyor belt, which is convenient for the cut PCB to be send out automatically.
• The platform is adjustable. It is good for the product quality when lifting the platform, because it will reduce stress and will not hurt the product.
• The spacing device applies to products of different size, so as to improve the work efficiency.