Ascentech LLC

North American Distributor for GEN3 Systems Ltd.test equipment and reliability products, and Optilia and Inspectis HD Camera inspection tools.

Distributor, Manufacturer's Rep

Ascentech, LLC is a Distributor  and Manufacturer’s Representative of Products and Services for Electronics Manufacturing and Printed Circuit Board Fabrication.

Ascentech is the North American Distributor for GEN3 Systems, Aprotec, Optilia Instruments AB and Inspectis premier production and product reliability test and inspection equipment including:

GEN3 Systems Ltd:
Auto-SIR – Surface Insulation Resistance Test System
CM-Series – Ionic Cleanliness (ROSE) Test Systems
DC- Series - Conformal Coating application, Precision Dip Coaters
SB2900 – Conformal Coating, Spray Booth Systems
Gensonic Ultra Sonic Stencil Cleaner
MUST III – Solderability Test System (wetting balance)
SPA1000 – Solder Paste Analyzer
SolderSaver – Solder Recovery System
Z-Check – Solder Paste Measurement Systems

Optilia Instruments AB:
High definition (HD) inspection cameras used both in-line and off-line
Flexia BGA Inspection systems for inspection of low clearance areas beneath BGA assemblies
OptiPix Software for image capture, video and image analysis

Inspectis Optical Systems AB

High definition (HD) inspection cameras

Ascentech LLC Postings

13 products »

CM Series - Ionic Contamination and Cleanliness Test

CM11 , CM 22, CM33. CM60   – Ionic Contamination and Cleanliness Test Systems to MIL & DEF standards. ...

Cleaning Equipment

CM Series - Ionic Contamination and Cleanliness Test

Optilia BGA Inspection scope

BGA, μBGA, CSP, Flip Chip Optical Inspection, Recording, Documentation 90º Side View Hand-held or Precision X-Y table...

Dispensing

Optilia BGA Inspection scope

Inspectis -HD inspection cameras

High Definition inspection cameras All-in-one ergonomic package 240mm working distances ...

Inspection

Inspectis -HD inspection cameras

Optilia M30x In-Line Full HD inspection camera

Full HD inpsection camera and accessories, for In-Line application. Post placement, post reflow Error verification ...

Inspection

Optilia M30x In-Line Full HD inspection camera

Gensonic Stencil Cleaner - UltraSonic

Gensonic Ultr-Sanic hand-held stencil cleaning Kit Compact and portable 2-3 minute cleaning cycle Cleans all solder pastes ...

Cleaning Equipment

Gensonic Stencil Cleaner - UltraSonic

Auto-SIR Surface Insulation Resistance Test

Auto-SIR – Performs Surface Insulation Resistance testing in accordance with all major international standards: IEC 61189-5, ISO 9455-17, IPC-TM-650, BELCORE GR-78-CORE, DIN German & JIS Japanese standards.  Includes elements of ...

Test Equipment

Auto-SIR  Surface Insulation Resistance Test

MIUST III Solderability Test (wetting balance)

MUST System III –  Solderability test system (wetting balance) tests to IEC 60068-2-54 and 60068-2-69, MIL-STD-883 Method 2022, IPC/IEC J-STD003A, IPC/IEC/JEDEC J-STD-002B and EIA/JET-7401.  Includes everything needed for all fo...

Test Equipment

MIUST III Solderability Test (wetting balance)

Solder-Saver

The Solder-Saver, from Aprotec: offers the opportunity to instantly recyle dross created in the solder pot. Hot dross is scooped up from the surface of the wave solder pot by the hand held, lightweight Solder-Saver. The unit separate...

Solder Materials

Solder-Saver

Solder Paste Inspection from Aprotec

The Z-100 and Z-Check 3D offer low cost methods to instantly measure and verify good Solder Paste deposition, a critical feed-back loop for SMT stencil set-up. The z-100 is a low cost manual Solder Paste Measuring system T...

Inspection

Solder Paste Inspection from Aprotec

See all products from Ascentech LLC »

16 news releases »

Ascentech will Exhibit Optilia, Inspectis and GEN3 Products at SMTA Empire Expo & Tech Forum June 15

Jun 01, 2017 | Ascentech will exhibit and demonstrate advanced Optilia, Inspectis, and GEN3 test and process optimization instruments and solutions at the upcoming SMTA Empire Expo & Tech Forum, Thursday, June 15, 2017 at the Holiday Inn Syracuse/Liverpool, 441 Electronics Parkway, Liverpool, New York.

ASCENTECH, LLC Named North American Distributor for New Inspectis Optical Inspection Line

May 15, 2017 | Ascentech, LLC has been named the new North American distributor for Inspectis, a new line of advanced optical inspection solutions for PCB assembly. Inspectis offers a line of plug and play, reliable and cost effective high definition camera microscopes designed for non-contact optical inspection, quality control, repair and rework, and more. Inspectis all-in-one optical inspection systems offer 12:1 optical zoom, auto focus, integrated illumination and on-board controls, producing a crisp picture of inspection objects up to 100x magnification directly onto an LCD monitor or PC. Designed for productivity and ergonomic use with a 245mm working distance, Inspectis provides relief to eyes, neck and shoulders and reduces the time spent on inspection. Operators can sit comfortably in a good working position and carry out their optical inspection tasks efficiently. An optional built-in laser pointer aims at the area of interest and assists in locating it on the screen.

ASCENTECH, LLC Named North American Distributor for New Inspectis Optical Inspection Line; Exhibits at IPC/APEX 2017

Jan 30, 2017 | Ascentech, LLC has been named the new North American distributor for Inspectis, a new line of advanced optical inspection solutions for PCB assembly. Inspectis offers a line of plug and play, reliable and cost effective high definition camera microscopes designed for non-contact optical inspection, quality control, repair and rework, and more. Inspectis all-in-one optical inspection systems offer 12:1 optical zoom, auto focus, integrated illumination and on-board controls, producing a crisp picture of inspection objects up to 100x magnification directly onto an LCD monitor or PC. Designed for productivity and ergonomic use with a 245mm working distance, Inspectis provides relief to eyes, neck and shoulders and reduces the time spent on inspection. Operators can sit comfortably in a good working position and carry out their optical inspection tasks efficiently. An optional built-in laser pointer aims at the area of interest and assists in locating it on the screen. Ascentech will exhibit and demonstrate the Inspectis product is Booth# 3136 at IPC/APEX 2017 in San Diego.

ASCENTECH, LLC Exhibiting Contamination Testing and Optical Inspection Solutions at IPC/APEX 2017

Jan 19, 2017 | Ascentech will be exhibiting the latest innovative contamination testing, optical inspection, and other productivity-enhancing technology at IPC/APEX in San Diego. Ascentech will show the remarkable GEN3 CM22+, one of the company’s award-winning CM+ range of contaminometers. The CM+ Series measure the amount of ionic contamination in accordance with all existing test methods often referred to as ROSE testing as well as the new PICT test. The CM22+ is a freestanding system able to accommodate larger assemblies while maintaining a low surface area to test solution ratio.

Ascentech to Introduce Remarkable New INSPECTIS System at Two SMTA Chapter Shows in the Northeast

Oct 16, 2016 | Ascentech, LLC will be exhibiting at two upcoming SMTA Chapter shows in the northeast, and will introduce a new inspection system as well as exhibit familiar leading test and inspection technologies. Ascentech LLC is a well-known distributor of leading-edge process optimization equipment for electronics manufacturing.

Ascentech to Exhibit Optilia Inspection, GEN3 Systems Solutions at SMTAI 2016 in Booth #219

Sep 08, 2016 | Ascentech, LLC will exhibit and demonstrate new test and process optimization instruments and solutions at the upcoming SMTA International Conference and Exhibition in Rosemont, IL, Sep. 25 - 29, 2016. Ascentech will exhibit these new products in booth #219.

Ascentech to Exhibit Optilia Inspection, GEN3 Systems Solutions at SMTA Ohio Expo & Tech Forum August 4th, 2016

Jul 30, 2016 | Ascentech LLC will exhibit and demonstrate new test and process optimization instruments and solutions at the upcoming SMTA Ohio Expo & Tech Forum August 4th 2016 in Independence (Cleveland) Ohio.

ASCENTECH to Introduce GEN3 CM+ Systems at IPC/APEX 2016

Feb 15, 2016 | Ascentech will be introducing the new GEN3 CM+ Systems at IPC/APEX. These systems will be shown for the first time in North America during IPC/APEX. On display in booth #2225 will be the CM22+, one of the award-winning CM+ range of contaminometers from GEN3. This new design is linked to the introduction of the new process control metric introduced by GEN3, e.g., Process Ionic Contamination Testing.

Ascentech, LLC to bring GEN3 Systems, Optilia Visual Inspection Products to SMTA Regional Shows This Month

Jun 08, 2015 | Ascentech, LLC, the North American distributor for GEN3 Systems products, Optilia Instruments AB, and other quality lines of test and productivity solutions, will exhibit at the upcoming regional SMTA shows in Philadelphia and in the upper Midwest (Minnesota).

Optilia appoints Ascentech LLC as North American Distributor

May 08, 2014 | Visual Inspection Instrument manufacturer Optilia Instruments AB announces the appointment of Ascentech LLC as North American Distributor. The agreement encompasses Optilia's BGA solder Inspection system and high-definition (full HD) camera inspection systems to the electronics manufacturing industry.

6 more news releases from Ascentech LLC »

Solder Paste Inspection

fluid dispensing pumps for integration