TP2 Pick and Place machine
Company Information:
Name: |
TP2 Pick and Place machine |
Category: |
|
Offered by: |
|
TP2 Pick and Place machine Description:
TP2 Pick and Place Spec. and Features |
|
Placement Specifications |
|
Number of Placement Heads |
1 |
Placement Rate (Theoretical Max.) |
2,500 CPH |
Placement Accuracy |
±0.05mm (0.002") |
Minimum Component Size(imperial) |
0402(option: if need smaller size, please contact us) |
Maximum Component Size |
22 mm x 22 mm (0.87" x 0.87") (option: if need bigger size, please contact us) |
Minimum Component Lead Pitch |
0.5mm(20 mil) |
BGA/CSP Placement Capability |
Yes - Standard |
Alignment Method |
Bottom vision camera |
PCB Specifications |
|
PCB Loading Method |
Manual |
Max. Placement Area |
310 mm x 300 mm (12.2" x 11.8") (Remark: without IC tray) |
Fiducial Recognition/ Coordinate Correction |
Yes |
Feeder Capacity |
|
Maximum Number of Built-in Feeders |
21(8mm), 4(16mm), 2(16mm) (option: if need more feeders, please contact us) |
Maximum Number of Waffle Trays |
2 (Waffle trays reduce placement area) |
Programming |
|
Operating System/control software |
Windows® Based |
Control Computer |
Optional (remark: you can install our control software in your PC/laptop) |
Teaching Camera |
Yes |
Numeric Data Entry |
Yes |
CAD Download |
Yes |
Step and Repeat for Matrix Boards |
Yes |
Optimization Functions |
Yes |
Mechanical Specifications |
|
X-Y Axis Drive Mechanism |
Belt with auto-tension system |
X-Y Axis accuracy |
±0.05mm(0.00197") |
Z Axis accuracy |
±0.05mm(0.00197") |
Θ Axis Range of Motion |
0.1˚/step |
Physical Specifications |
|
Overall Dimensions (Approx. L x W x H) |
950 mm L (With Built-in Feeders) x 730mm W x 450 mm H (38" x 29" x 18") |
Approximate Net Weight |
57 Kg (126 lbs.) Without Stand |
Facility Requirements |
|
Standard Voltage |
220 or 110 VAC, Single Phase, 50/60 Hz |
Service and Support |
|
Warranty |
1 Year |
Technical consulting and support(via email, phone, Skype etc.) |
Span of Life |
Features:
. Suit for both single-sided and double-sided printed circuit boards, even one side has already been assembled, its flexible and easy-to-operate board holder ensure same location, quick-changeover from one board to the next, the boards are fixed in the holder stably and horizontally.
. Provide the consistent, good placement quality, the vision system with head (mark) camera and bottom alignment camera ensure the accurate and repeatable placement for any boards and components.
. Built-in Feeders without extra cost, the unique feeding system is easy to load and unload the tape-reel packaging components, it is fully like the separate feeders which are used on the traditional feeders but no extra cost.
. Auto refeeding function, the vacuum leakage detection system, when the component in the feeder is picked improperly, the head/nozzle will pick the component from the feeder once again, and the components in the feeder run out, there is alarm sound and error message to remind you to reload another tape reel to continue the production.
. Multi-modes operation, it has the different run modes including teaching, idle, no-stop, and you can also start running from any step that you want, skip any step, feeder or board piece of panel, the running speed for all components or single components can be adjusted.
. Easy programming, you can directly and fact import CAD data to the program file, or you can make the program by teaching mode with the head camera.
. User-friendly software interface, the machine is controlled by PC or laptop, you can be easy to operate, run the machine, you can do many operations/adjustments on the computer, and an unlimited number of program files can be created, stored and chosen in the control computer.
TP2 Pick and Place machine was added in Dec 2017
TP2 Pick and Place machine has been viewed 458 times