SMT Equipment

XY-LF 8800A Solder/Desolder Station w/ BONUS Fume Extractor 426DLX

Company Information:

Leading Supplier of PB Free Soldering Equipment, Fume Extraction, and Soldering Tools.

Shingle Springs, California, USA

Distributor, Manufacturer, Manufacturer's Representative

  • Phone 530-676-6262
  • Fax 530-676-6265

See Supplier Website »

Company Postings:

(4) products in the catalog

XY-LF 8800A Solder/Desolder Station w/ BONUS Fume Extractor 426DLX

XY-LF 8800A Solder/Desolder Station w/ BONUS Fume Extractor 426DLX

Name:

XY-LF 8800A Solder/Desolder Station w/ BONUS Fume Extractor 426DLX

Category:

Solder Materials

Offered by:

XYtronic-USA

   

XY-LF 8800A Solder/Desolder Station w/ BONUS Fume Extractor 426DLX Description:

The Xytronic LF-8800A 5 Tool Lead Free SMT Workstation, with an internal vacuum pump is XYtronic-USA’s best solution for all your soldering/desoldering equipment needs, especially for lead free applications! We believe you will be more than satisfied with the many features and the versatility of your new soldering/desoldering station. Comes with cleaning kit and additional tweezers.
Heater/Sensor Failed Detection:
If sensor circuit fails, the heater power is shut down.

Temperature “Lock-Out” feature: 
The temperature can be locked with a password code.

ESD Safe and Spike Free circuitry:
The “Zero Voltage” electronic switching design protects voltage and current sensitive components (CMOS devices, etc.) against damaging current and transient voltage spikes commonly produced by less efficient, mechanically switched stations.

Delayed Suction Desoldering:
To eliminate the problem of solder clogging up the tip, a delayed switch feature has been incorporated for the unit that allows the pump to continue sucking for 1.5 seconds after the actuator switch is released

Energy Saver Mode: 
If the station is left idle for 20 minutes, the energy saver feature will automatically engage, resetting the temperature to 150°C from the previous setting.

Iron Working Option: Both soldering, desoldering irons can be used at the same time.

LF-8800A 5 Tool Lead Free SMT Workstation includes:

PLUS 90W SMD Tweezers: Specially designed for SMD chips, SOT, 
Flat pack IC’s etc. reworking.

PLUS 80W Hot Air Pencil (HAP 80):
Removes SMD chips and flat packs up to 25mm.

PLUS 100W Desolder Iron (DIA 100)

PLUS 100W Soldering Iron (307A)

PLUS 426DLX Fume Extractor

XY-LF 8800A Solder/Desolder Station w/ BONUS Fume Extractor 426DLX was added in Jun 2010

XY-LF 8800A Solder/Desolder Station w/ BONUS Fume Extractor 426DLX has been viewed 777 times

3 More Products from XYtronic-USA :

Conductive Adhesive & Non-Conductive Adhesive Dispensing

Reflow Oven