SMT / PCB Products and Services
SMT, PCB Manufacturing products and services offered by SMTnet members.
This product does not exist or has been removed.
Browse other electronics manufacturing products.
MVME167PA-36SE
High-performance SBC Refurbished – Good Condition Manufacturer – Motorola 133 MHz MC68040 32-bit microprocessor with 8KB of cache, MMU, and FPU Full 32-bit master/slave VMEbus inter...
MVME167PA-34SE
High-performance SBC Refurbished – Good Condition Manufacturer – Motorola 133 MHz MC68040 32-bit microprocessor with 8KB of cache, MMU, and FPU Full 32-bit master/slave VMEbus inter...
MVME51105E-2263
VME Processor Module Refurbished – Good Condition Manufacturer: Motorola Model: MVME 5100 Microprocessor: MPC7410, MPC750 or MPC755 with 32KB/32KB L1 cache DRAM: Up to 512MB of onboard ECC S...
MVME55006E-0163
MVME5500 Single-Board Computer Refurbished – Good Condition Manufacturer: Emerson MPC7457 PowerPC® processor at 1 GHz 512KB of on-chip L2 cache and 2MB of L3 cache AltiVec coprocessor fo...
We are your obsolete industrial product specialists. Our inventory includes VME, cPCI, ATCA, SBCs and much more industrial electronics
Hackettstown, USA
Batch - Inline - Stencil Cleaners
Batch - Inline - Stencil Cleaners - Speedline Electrovert, Trek, Stoelting, Unit Design, Aqueous Technologies, EMC, Smart Sonic Batch-Inline-Stencil Cleaners for sale at JMW Enterprises...
Reflow Ovens
Reflow Ovens - BTU, Electrovert, Heller, Vitronics Soltec Reflow Ovens for sale at JMW Enterprises....
SMT Feeders
SMT Feeders - Fuji, Siemens, Hover Davis, Mydata SMT Feeders for sale at JMW Enterprises....
PCB Magazines
PCB Magazines - CAB, NIX, Simplimatic PCB Magazines for sale at JMW Enterprises....
Used SMT Screen Printers
SMT Screen Printers - DEK, MPM, Ekra SMT Screen Printers for sale at JMW Enterprises....
SMT Spare Parts
SMT Spare Parts - Electrovert, DEK, MPM SMT Spare Parts for sale at JMW Enterprises....
SMT Adhesive Dispensers
SMT Adhesive Dispensers - Camalot, Nordson, Asymtek SMT Adhesive Dispensers for sale at JMW Enterprises....
Through Hole Machines
Through Hole Machines - Universal, Amistar Through Hole Machines for sale at JMW Enterprises....
SMT Placement Machines
SMT Placement Machines - Fuji, Mydata, Universal SMT Placement Machines for sale at JMW Enterprises....
Routers - Depanelizers
Routers - Depanelizers - Cencorp, JOT Routers-Depanelizers for sale at JMW Enterprises....
Rework Stations
Rework Stations - Air Vac, SRT, Pace, Metcal, Conceptronic Rework Stations for sale at JMW Enterprises....
Parts Prep - Wire Strippers
Parts Prep - Wire Strippers - Hepco, GPD, Heller, Eubanks, Vtek Parts Prep-Wire Strippers for sale at JMW Enterprises....
SMT Conveyors
SMT Conveyors - Conveyor Technologies, JOT, Simplimatic, ASYS, Flexlink SMT Conveyors for sale at JMW Enterprises....
Selective Soldering Machines
Selective Soldering Machines - Pillarhouse, Vitronics Soltec, ERSA, A.C.E. Production Technologies Selective Soldering Machines for sale at JMW Enterprises....
Wave Soldering Machines
Wave Soldering Machines - Speedline Electrovert, Vitronics Soltec, Technical Devices, Ersa, Seho Wave Soldering Machines for sale at JMW Enterprises....
AOI - Xray - Paste Inspection
AOI - Xray - Paste Inspection - Yestech, Viscom, Omron, MVP, Cyber Optics, GSI Lumonics AOI-Xray-Paste Inspection for sale at JMW Enterprises....
Buyer, Seller, Broker of Electronic Assembly Equipment
Rushford, Minnesota, USA
SMT 松下/西门子/三星/FUJI/YAMAHA/JUKI/机器销售维修
According to the customer's requirements, there are slow and fast modes of transportation, and the quotation does not include shipping fees, which are free of charge in China.(运输方式按照客户的要求,有慢的,也有快的,报价不包含运费,国内免运费。)...
我们是一家来自中国的SMT供应商。我们长期供应SMT设备供料器及设备配件,包括松下、三星、雅马哈、富士、西门子、JUKI等。我们供应SMT吸嘴、SMT供料器、SMT机器。
Suzhou, China
SMT SAMSUNG Surface Mounter SM481 PLUS
http://www.flason-smt.com/product/SMT-SAMSUNG-Surface-Mounter-SM481-PLUS.html SMT SAMSUNG Surface Mounter SM481 PLUS &...
Panasonic CM402 CM602 8mm SMT feeders
http://www.flason-smt.com/product/Panasonic-CM402-CM602-8mm-SMT-feeders-KXFW1KS5A00.html Panasonic CM402 CM602 8mm SMT feeders KXFW1KS5A00...
Panasonic NPM-D3 SMT Machine-Flason SMT
http://www.flason-smt.com/product/Panasonic-NPM-D3-SMT-Machine.html Panasonic NPM-D3 SMT Machine Panasonic SMT Machine Panasonic NPM-D3 S...
Panasonic CM602 Pick and Place Machine
http://www.flason-smt.com/product/Panasonic-CM602-Pick-and-Place-Machine.html Panasonic CM602 Pick and Place Machine ...
Yamaha 0201 01005 03015 nozzle
http://www.flason-smt.com/product/Yamaha-0201-01005-03015-nozzle.html Yamaha 0201 01005 03015 nozzle SMT Nozzle...
Heller 1707 Mark III SMT Reflow Oven
http://www.flason-smt.com/product/Heller-1707-Mark-III-SMT-Reflow-Oven.html Heller 1707 Mark III SMT Reflow Oven &...
High Quality LED Light Making Machine Reflow oven F12
High Quality LED Light Making Machine Reflow oven F12 High Quality LED Light Making Machine Reflow oven LED Light Making Machine Reflow oven...
Automatic PCB Soldering Machine R8
Automatic PCB Soldering Machine R8 SMT Reflow Oven Wave Soldering Machine Videos Name: SMT Reflow Oven Heating zones: 8&...
Nitrogen Wave Soldering Machine KTN-450
Nitrogen Wave Soldering Machine KTN-450 SMT Reflow Oven, Wave Soldering Machine Videos Nitrogen Soldering Process Solder pot capaci...
Flason SMT Reflow Oven F12
Flason SMT Reflow Oven F12 Name: SMT Reflow Oven Heating zones: 12 Heating method...
Sanyo TCM3000 Z81 Nozzle 6300529586
http://www.flason-smt.com/product/Sanyo-TCM3000-Z81-Nozzle-6300529586.html Sanyo TCM3000 Z81 Nozzle 6300529586...
YAMAHA FS2 8x2mm Feeder
http://www.flason-smt.com/product/YAMAHA-FS2-8x2mm-Feeder.html YAMAHA FS2 8x2mm Feeder SMT Feeder...
JUKI 520 SMT NOZZLE E36297290B
http://www.flason-smt.com/product/JUKI-520-SMT-NOZZLE-E36297290B.html JUKI 520 SMT NOZZLE E36297290B SMT...
I-Pulse F2 8×4mm feeder LG4-M1A00-110
http://www.flason-smt.com/product/I-Pulse-F2-8-4mm-feeder-LG4-M1A00-110.html I-Pulse F2 8×4mm feeder LG4-M1A00-110...
PCB Inspection Online AOI Machine Z588
http://www.flason-smt.com/product/PCB-Inspection-Online-AOI-Machine.html PCB Inspection Online AOI Machine Z588 Inspection Component:...
Heller 1936/2043 MARK 5 SMT REFLOW OVEN
Heller 1936/2043 MARK 5 SMT REFLOW OVEN Heller Reflow Oven Heller SMT Reflow Oven Heller 1936/2043 MARK 5 S...
Hitachi TCM X200 Pick and Place Machine
http://www.flason-smt.com/product/Hitachi-TCM-X200-Pick-and-Place-Machine.html Hitachi TCM X200 Pick and Place Machine...
Hitachi SIGMA G5 Pick and Place Machine
http://www.flason-smt.com/product/Hitachi-SIGMA-G5-Pick-and-Place-Machine.html Hitachi SIGMA G5 Pick and Place Machine Hitachi SIGMA G5 P...
Samsung SM431 Pick and Place Machine
http://www.flason-smt.com/product/Samsung-SM431-Pick-and-Place-Machine.html Samsung SM431 Pick and Place Machine Samsung SM431 Pick and Pl...
JUKI KE-2010 Pick and Place Machine chip Mounter
JUKI KE-2010 Pick and Place Machine chip Mounter Applicable Components: 0402 ~ 20mm Board size:330 ×...
Flason is high-tech enterprise focusing on SMT research and development,building new advanced solutions in SMT Assembly machines, like reflow oven, wave soldering machine, pick and place machine, AOI,SPI,PCB conveyor etc.
shenzhen, China
Solder paste mixer SMT automatic solder paste mixe
Model: nstar-600 Origin: Shenzhen, China Installation mode: vertical Color classification: solder paste mixer machine + mixing knife Applicable material: solder...
Panasonic CM202-DS CM201-DS Chip Mounter Pick and Place Machine
Sector Specification(CM202-DS) Specification(CM201-DS) ModelNo. KXF-E24C KXF-E14C...
KIC 2000
Introduction of kic2000 furnace temperature tester Processing customization: Yes Brand: US KIC Model: kic2000 Measurement range: - 50-1050 (℃)...
SMT PCB conveyor, PCB detection conveyor
1. PCB transmission machine: For the connection between SMT production lines, Du can also be used for PCB buffering, inspection, Zhi test or manual insertion of electronic components. 2. Application ra...
Suction nozzle cleaning machine, automatic / SMT suction nozzle cleaning
Supply suction nozzle cleaning machine, automatic / SMT suction nozzle cleaning machine / Shenzhen manufacturer details Product Name: suction nozzle cleaning machine Product model: hn-nc207...
PCB turnover trolley new SMT circuit board PCB board turnover transfer stainless steel hand push bench
Board Handling - Pallets, Carriers, Fixtures
It can be customized according to the requirements...
JUKI High -Speed Compact Modular Mounter RX-7R
Specification Model Item...
SMT hanging rack electronic factory hanging rack anti-static turnover car can be customized stainless steel tray box car
SMT peripheral equipment mainly refers to: printing press, docking station, Mounter, reflow soldering, AOI, wave soldering and other equipment. SMT peripheral technology is similar to the original hyper threading technolo...
3D SPI-7500 solder paste thickness gauge
Detailed introduction of 3D spi-7500 solder paste thickness gauge Product function Fast programming, friendly programming interface 1. Multiple measurement methods...
Automatic solder paste printer GKg G9+
G9 + automatic vision printing machine is a new product for SMT high-end application field, which can perfectly meet the process requirements of 03015, 0.25pich and other fine spacing, high precision and high speed. Intro...
Automatic solder paste printing machine
Solder paste printing range (1) SMT technology of resistance, capacitance, inductance, diode, triode and other chip components production and processing: 01005, 0201, 04020603, 0805, 1206 and other specifications and size...
Solder paste FIFO storage device refrigerator solder paste storage type first in first out storage rack cabine
Product material: stainless steel (internal) + steel plate baking paint Storage quantity: 36 cans of tin paste Product weight: 13kg Product size: 495 * 750 * 95mm...
Panasonic NPM-W SMT machine
Model name: NPM-W Substrate size Monorail * 1 Overall installation: L50mm×W50mm ~ L750mm×W550mm...
Cylinder type solder paste rewarming machine can solder paste return temperature timer solder paste timing rewarming machine
Brand: NSTAR model: bacao solder paste rewarming machine Origin: Shenzhen, China Color classification: type A: 4 syringe tank + 4 can filling tank...
Siemens electric Feeder calibrator feeder calibrator SMT Feeder calibrator
Trade name: Siemens feeder calibrator Weight: About 35kg Product size (mm): L500 * W350 * H500 Calibration mode: Electric Applicable model: Siemens D series (not...
Samsung SM Feeder car
SMT peripheral equipment mainly refers to: printing press, docking station, Mounter, reflow soldering, A...
KIC X5
Product coefficient of KIC X5 furnace temperature tester Hardware performance: 1. Support all winoows software platform, USB key encryption function. 2. New dual power supply mode:...
3D SPI-6500 solder paste thickness gauge
Detailed introduction of 3D spi-6500 solder paste thickness gauge Product function 1. Friendly programming interface 2. Multiple measurement methods 3....
1.2m LED light bar special semi-automatic solder paste printing machine S1200
technical parameter Model: s1200 (special type for LED light bar) Overall dimension (L × w × h): 1650 × 620 × 1550 (mm) Platform size: 320 × 1300 (mm)...
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Shenzhen, China
Consultant / Service Provider, Equipment Dealer / Broker / Auctions, Manufacturer, Manufacturer's Representative
Samsung SAMSUNG CN400N Nozzle
SAMSUNG CN400N Nozzle Model: SAMSUNG CN400N Nozzle SAMSUNG Nozzle List Brand Machine Model Specification Material of nozzle tip SAMSUNG CP30 M1, M2 , M3 Tungsten steel SAMSUNG CP33 XG05 / XH0...
17550004 Rotary Encoder Assy For VSQ
17550004 Rotary Encoder Assy For VSQ 43871802 Universal plug-in machine AI accessories 44241409 Universal plug-in machine AI accessories inner forming knife (left) with tungsten steel 44241509 Universal plu...
JUKI NF 8*4MM ORIGINAL USED FEEDER
JUKI NF 8*4MM ORIGINAL USED FEEDER OFFER JUKI NF feeders: JUKI NF8*2MM NF8*4MM NF12MM NF16MM NF24MM NF32MM NF44MM NF56MM FEEDER(original used ). Sales: Becky Su MP:86-15323874439 Email: becky@hysmt.cn...
JUKI 8MM FEEDER CF081CR CN081CR
JUKI 8MM FEEDER CF081CR CN081CR We have 500+ original brand new CF081CR CN081CR feeder in stock, welcome contact us! M/P: +86 15323874439 Email: becky@hysmt.cn beckysusmt@hotmail.com Skype: beckysm...
JUKI ATF E1001706ABO AF05HP feeder
JUKI ATF E1001706ABO AF05HP feeder Dear friend, Thanks for your visit. We have 300+ JUKI ATF E1001706ABO AF05HP feeder in stock, if you are interested in them, feel free to contact us. M/P: +86 15323874...
JUKI 8X2 feeder part upper cover E1203706CA0
JUKI 8X2 feeder part upper cover E1203706CA0 Sales: Becky Su MP:86-15323874439 Email: becky@hysmt.cn beckysusmt@hotmail.com Skype: beckysmt Website: www.smt-cn.com...
Samsung feeder 8*2mm for CP45
Samsung feeder 8*2mm for CP45 CP40/ CP45FV NEO 8*2mm feeder Sales: Becky Su MP:86-15323874439 Email: becky@hysmt.cn beckysusmt@hotmail.com Skype: beckysmt Website: www.smt-cn.co...
Siemens 901 322603 Ceramic Nozzle
Siemens 901 322603 Ceramic Nozzle Sales: Becky Su MP:86-15323874439 Email: becky@hysmt.cn beckysusmt@hotmail.com Skype: beckysmt Website: www.smt-cn.com...
Juki SMT COPY nozzles
our nozzles that use for JUKI SMT machines with good quality and the most competitive price. They are all original products and we now have so many in stock. Welcome to contact us in your free time if you are interested. Part numbers as following:...
JUKI FF12FS FEEDER
JUKI FF12FS FEEDER We have 200+ imitation new FF12FS feeder in stock, welcome inquiry them. Sales: Becky Su MP:86-15323874439 Email: becky@hysmt.cn beckysusmt@hotmail.com Skype: beckysmt...
Yamaha YAMAHA YS12 312A NOZZLE
Yamaha YAMAHA YS12 312A NOZZLE YAMAHA YS12 312A NOZZLE YAMAHA Nozzle List Brand Model Specification Material of nozzle tip YAMAHA YV100II 31#NOZZLE 0402 / 0603 / 0805 (X) Tungsten steel YAMAH...
SMT Samsung 12mm embossed feeder for SM series pick and place machine
SMT Samsung 12mm embossed for SM series pick and place machine Samsung SM/CP40 CP45 Feeders models: SAMSUNG SM 8*2mm FEEDER SAMSUNG SM 8*4mm FEEDER SAMSUNG SM 12mm FEEDER SAMSUNG SM 16mm FEEDER SAMSUNG...
JUKI Nozzle for 700&2000 series
JUKI Nozzle for 700&2000 series KD775&780E3401-802-000JUKIKD775 DISP NZ S2D/1S 0.6/0.3P=0.7E3406-802-00JUKI KD775 DISP NZ M1D/2S 0.7/0.4P=1.0E3411-802-000JUKI KD775 DISP ...
juki 8mm feeder ATF05HP
juki 8mm feeder ATF05HP...
YAMAHA CL84 Feeder
YAMAHA CL84 Feeder Yamaha FEEDER CL8X4 with extesion reel holder P/N: KW1-M1200-00X, P/N: KW1-M1100-000, NEW The depth of groove for the material is 2.5mm. 4mm Pitch (Sprocket), Tape guide 8X4 (0603,0805) Sales: Becky Su...
Fuji W32 Motor feeder
Feature : Made by FUJI Machine MFG. Part Name: Motor Feeder W32 32mm FMB-32E-380. Part Number: AKDFA-6100 KDE-3200. For FUJI IP1 IP2 IP3 QP242E QP3 XP2 Electronics Assembly Equipment. Brand : FUJI Unit : PC(...
Panasonic MSHG3/MSHG2 Feeder Calibration JIG SMT Feeder Calibration
Panasonic MSHG3/MSHG2 Feeder Calibration JIG SMT Feeder Calibration Panasonic MSHG3/MSHG2 Feeder Calibration JIG SMT Feeder Calibration Specification: Dimension:500 x 350 x 550 mm , L x W x H...
Juki intelligent feeder calibration jig
Juki intelligent feeder calibration jig This product adopts CCD with high times magnifier, through a MONITOR observation into components situation, Lever needle up and down work conditions, the LEVER fray, decrease FEEDER false and the c...
2-88mm feeders Fuji XPF compatible
2-88mm feeders Fuji XPF compatible 2-88mm feeders Fuji XPF compatible We have this feeder in stock, original used & working wel, if you have any interest, just contact us. M/P: +86 15323874439 Email: bec...
YAMAHA KJK-M1300-010 FS2 8X2mm feeder
Dear Customer, Thanks for your attention. We have 300+ YAMAHA KJK-M1300-010 FS2 8X2mm feeder in stock, if you are interested in them, just contact us. Sales: Becky Su MP:86-15323874439 Email: becky...
ZK Electronic Technology Co., Limited
ZK Electronic Technology Co., Limited professional in Surface-Mount Technology area and supports most major brands of electronic asembly equipments with a large selections of compatible SMT.
Shenzhen, China
Consultant / Service Provider, Distributor, Equipment Dealer / Broker / Auctions, Manufacturer
FPGA Design Service
FPGA Design Service, FPGA Development Service, FPGA Prototyping Service Extensive experience with FPGA Design, Development & Prototyping. We are the preferred manufacturer and design partner for Xilinx, Altera...
Electrical Signal Integrity & Electrical Simulation Services
Electrical Signal Integrity & Simulation Services Electrical Signal integrity to measure the quality of your electrical signal. Simulation services that include multiple analyses. Pre Layout Simulation Post Layo...
Mechanical Design Engineering
Mechanical Design Engineering: complete mechanical design for each product or we can make modifications and improvements to your existing mechanical design. With a variety of product categories, including consumer products, me...
Connectivity Kit for FPGA
CONNECTIVITY KIT FOR FPGA The WS-709 Connectivity Kit for FPGA works with XC7VX2000T. ...
Electronics New Product Introduction, NPI for Electronics
Electronics New Product Introduction, NPI for Electronics New product introduction engineering services and protoyping specialists. We help you get your products to market faster. Our Electronics new product...
Kintex-7 FPGA Evaluation Kit
Kintex-7 FPGA WH705 Evaluation Kit The WS-705 Kintex-7 FPGA Evaluation Kit works with XC7K410T...
Medical Devices ISO 13485:2016 Certified Company
Whizz Systems is ISO 13485:2016 certified company provider of Electronics Manufacturing Services....
Flying Probe TEST Services, ICT Test Services, Functional Test Services, Burn-In
We maximize test point coverage. We will give you the report of all the nets that are not being covered, so that we can cover those nets in a functional test.. We have several testing options in-house, and will offer you the right ch...
Assembly Services
Electronic Assembly Services Turnkey production assembly services from small to large sized production, production builds of various sizes, ranging from a few boards to thousands. We are also a good fit for custo...
FMC Loopback Card
FMC Loopback Card For more details about our FMC loopback card and to download a pdf with details please visit our website....
Evaluation Kit for FPGA
WS-707B Evaluation Kit for FPGA This evaluation kit for FPGA is designed to work with XC7V2000T....
Circuit Board Design Service
Circuit Board Design Service Experts Complete engineering services for circuit board design from the experts at Whizz!...
Flying Probe TEST Services, ICT Test Services, Functional Test Services, Burn-In
We maximize test point coverage. We will give you the report of all the nets that are not being covered, so that we can cover those nets in a functional test.. We have several testing options in-house, and will offer you the right ch...
5g Design Services
We provide 5G design services IOT including an expansive choice of engineering services pertaining to Internet of Things Networks that are sensor-driven in nature, ranging from IoT architecture designing and development to manufacturing....
PCB Design Service
Expert Printed Circuit Design services. PCB design and engineering services including designing characterization PCB boards for new silicon, developing test plans and providing characterization services. We provide custom hardware deve...
Box Build EMS
Box Build EMS We provide comprehensive Box Build EMS . We specialize in manufacturing sub-assemblies, especially Electro-Mechanical Assembly as well as PCBs with different fitments and brackets. Our expertise in...
Package Design and Simulation
We perform package design and simulation and analysis including models, data and results. ...
IOT Design Service, Internet of Things Design Service, IOT Sensors Design Service
IOT Design Service, Internet of Things Design Service, IOT Sensors Design Service Expert Internet of Things Design Service / IOT Design Service. Our IOT sensor design service experts can help get your IOT architecture designed and...
FPGA Evaluation Kit
FPGA Evaluation Kit This FPGA Evaluation kit works with XC7VX690T. The model number for this FPGA evaluation kit is WS-707A...
Electronic manufacturing services - electronic design, development and manufacturing. Circuit board design, prototyping, FPGA services, signal integrity and simulation, pcb assembly. Factories in California USA and Malaysia.
Santa Clara, California, USA
ezLOAD PCB Support System
Board Handling - Pallets, Carriers, Fixtures
Count On Tools Inc., a leading provider of precision components and SMT spare parts, introduces the new ezLOAD PCB Support System. With the recent increase of densely populated double-sided circuit boards, COT recognized the need for more affordab...
Juki SMT Nozzles, Tooling, & Consumables (KE, FX, JX, RX, & more)
We offer a wide selection of the Juki SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality, l...
Mycronic Mydata SMT Nozzles, Tooling, & Consumables (Midas & Hydra)
The new series of Mydata replacement nozzles, for both the Midas and Hydra mountheads, are the only direct replacement for OEM nozzles on the market. We also offer custom engineering to standar...
LED Nozzles
Recent growth in LED technology and solid state lighting has provided the electronics manufacturing industry with viable solutions for today's electronic devices. As a result, companies in the surface mount technology (SMT) industry are expanding...
Ipulse SMT Nozzles, Tooling, & Consumables (M1, M2, M4, M6, M7, M8, & more)
We offer a wide selection of the IpulseSMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality,...
StripFeeders Adjustable Feeder System
Why purchase expensive feeders for each component when you only need to place a few at a time? Count On Tools Inc. (COT), a leading provider of precision components and SMT spare parts, introduces the revolutiona...
Fuji Nozzles (NXT, XP, CP-6, CP-7, QP3, IP3, & more)
We offer a wide selection of the Fuji SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufactu...
Assembleon SMT Nozzles, Tooling, & Consumables (Emerald, Opal, Topax, Saphire, MC, MG, & more)
We offer a wide selection of the Assembleon SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high qual...
ASM/Siemens Siplace Ceramic Nozzles
These new ceramic versions are available in the 901, 902, 904, 906, & 925 versions. Special vacuum geometry provides excellent performance in the machine which saves you time and money during production. The machined bodies are flexible, so...
INSTOCK Consigment Program for SMT Nozzles, Tooling, & Consumables
The INSTOCK Consignment Plus Program has been developed to give EMS companies and contract manufacturers immediate access to project critical products with no up-front inventory costs or risk of overstock. INSTOCK program serves particip...
QWIKTRAY Custom Matrix Trays for Electronic Components
Do you have a unique component that isn’t available in tape and reel? Tired of hand placing those components because you don’t have a compatible feeder? Can’t find J...
Mirae SMT Nozzles, Tooling, & Consumables
We offer a wide selection of the Mirae SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality,...
Hitachi SMT Nozzles, Tooling, & Consumables (Sigma, GXH, & more)
We offer a wide selection of the Hitachi SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality...
Selective Soldering Nozzles & Tooling (Ace KISS, Pillarhouse, RPS, & more)
Count On Tools has been a manufacturer of high quality, low cost nozzles and associated components for the SMT & PCB Assembly industries for over 20 years. Our commitment and goal is to be the number one supplier of precision engineered SMT no...
ezCLIP Universal Stop Clip for PCB Magazine Racks
Introducing the ezCLIP universal stop clip for PCB magazine racks. The ezCLIP system was created to allow electronics manufacturers who manually load/unload PCB magazine racks a simple way to distinguish required spacing between boards and to p...
Panasonic SMT Nozzles, Tooling, & Consumables (CM402, CM602, NPM, MSF, BM, HT, MSR, MV, & more!)
We offer a wide selection of the PanasonicSMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high qualit...
Mycronic / Mydata Feeder Repair Service
Count On Tools now offers repair services for MYDATA Agilis Feeders. This program will be available for the 3.7, 4.0, 4.7, and 5.4 Agilis feeders. This is the only repair option for these feeders on the market and provides significant costs sav...
Samsung SMT Nozzles, Tooling, & Consumables (CP40, CP45, CP60, SM, & more)
We offer a wide selection of the Samsung SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality...
Yamaha SMT Nozzles, Tooling, & Consumables (YV, YG, YS, & more)
We offer a wide selection of the Yamaha SMT Nozzles, Tooling, & Consumables. We also offer custom engineering to standard nozzles for odd shaped components. Count On Tools has been a manufacturer of high quality,...
Custom LED Nozzles & Pick Up Tools
Count On Tools specializes in custom engineered nozzles for all types of LEDs (Cree, Luxeon, Phillips, NIchia, Osram, etc). Recent growth in LED technology and solid state lighting has provided the electronics manufa...
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
Gainesville, Georgia, USA
Tape & Reel Services For Standard or Non Standard SMD Components
We offer tape and reel packaging services for standard or non standard SMD components. We provide as well customized carrier tapes for special components designed at our customers specifications...
ARC - Automatic Reel Changer
Automatic Reel Changer - ARC Flexible, easy to use, menu driven software and...
MB872 Tape & Reel Module For Any Type of SMD Components
Reel input : Diam. 180 / 330 / 380 / 560 / 760mm (7 / 13 / 15 / 22 / 30 inches) Reel output : Diam. 180 / 330 / 380 / 560 (13 / 15 / 22 inches) Tape advance - stepper moto...
Tape & Reel Material
We supply the following material for tape & reel equipment : Pocket tape Cover tape Reels (all dimensions)...
Tube Feeder Module For Any Type of SMD Components in Plastic Tubes
Basic module for 1 type of component Easy changeover kit for tube loader (1 for each component type) Tube height adjustable thanks to precision screw Maximum heig...
High Precision Mechanical Parts Manufacturing And Precision Dies
Milling Turning Grinding Honing EDM Wire cutting Heat Treatment Machining...
ARC Automatic Reel Changer
Ready for Industry 4.0 ARC - Fully Automatic Reel Changer Stand alone module to be integrated on any Tape&Reel machine output Option : Automatic Sticker labelling Option...
NANO Pick & Place Modular Handling System
This machine is especially designed for multifunction operations Key configuration: Tray in - Tray out Tray in - Tape out &...
3D inspection machine
Compact designed machines to match perfectly different kind of modular operation process Key configuration : Tray in - Tray out...
LISA Modular Handling System
Compact designed machines to match perfectly different kind of modular operation process Key configuration : Tray in - Tray out Tray...
Connector vision inspection machine
Connector vision inspection machines 2D - 3D integration Coplanarity inspection Tube or tray input Tape and reel output...
PICO II Pick&Place machine
New PICO II pick&place machine now available Media Input : Bulk Bowl feeder or Tube feeder Media Output : Tape & reel Vision inpsection UPH : up to 8'000 parts&...
LEVIO Contactless Touchless Pick and Place
Contactless touchless manipulation, no more contact and surface defects Flexible, easy to use, menu driven software, advanced mechanic and electronic characteristics, fully contactless manipulation capabilities....
ATF - Automatic Tray Feeder
ATF - Automatic Tray Feeder Flexible, easy to use, advanced mechanic...
TFA - Automatic Tube Feeder (TFA)
TFA - Automtatic Tube Feeder (TFA) • Basic module for 1 type of component • Cycle time : 1,5 seconds (1up feed) • Mounted on...
Automatic Tape & Reel
Automatic tape & reel equipment - manual tape and reel - fully automatic tape and reel including vision inspection...
PICO Modular Pick and Place System For Tape and Reel Packaging
Modular automatic pick and place machine featuring tape and reel module, bowl feeder and tube feeeder. Ergonomic, easy access, economic and easy to use Our standard input and output modules can be located all around the...
Modular pick and place automation - tape and reel - tube feeder - coplanarity check - assembly machine - contactless pick and place
St.Blaise, Switzerland
Volumetric Pump - PCD
Volumetric Dispense Pump - PCD Technology revolutionizes how you dispense and how you perceive dispensing. PCD - Progressive Cavity Displacement PCD is a continuously volumetric dispense pump based on the Progressive Cavity pri...
Benchtop / TableTop Dispensers - Island Series
Simplify Dispensing with GPD Global’s Island Series Dispense Platforms Island Series robots give you versatility to do simple, repetitive automation jobs. Work areas range from 300 mm x 400 mm to 400 mm x 400 mm. All Island Series...
Time Pressure Liquid Dispensing Pump with Foot Switch or Dry Contact
Time Pressure Liquid Dispensing Pump with Foot switch / Dry contact A great addition to Fully Automatic Dispensing System Time pressure is a versatile method of dispensing that functions across a wide range of...
Real Time Process Control for Uniform Fluid Dispensing
Real Time Process Control with FPC: Fluid Pressure Control (Patented) Runs your pump at optimal levels at all times instead of starving or drowning it with inadequate...
Selective Conformal Coating Systems - Tilt and Rotate
Cost-effective Solutions for Conformal Coating New cost-effective, automated Conformal Coating System (SimpleCoat TR) with tilt and rotate capability and excellent repeatability for just under $4...
Precision Lead Former for Taped RADIAL Components (CF-9)
The CF-9 Radial Lead Former forms and cuts 2- and 3-leaded taped radial components such as TO-92s, capacitors, transistors, LEDs, etc. - precisely and repeatedly, in standard and special forms. This machine is capable of forming and cutt...
High Precision Dispenser - MAX II (Heated Dispenser)
Precision Dispensing System for Heated Dispense Applications The GPD Global MAX II is a compact; high-accuracy system designed for today’s advanced heated dispensing applications. The frame is molded from “liquid rock&rd...
Lead Former for Bulk or Loose RADIAL Components (CF-10)
Form & Cut 2-, 3-, 4-, 5-, and 7-leaded Radial Components Capable of forming loose radial components at rates up to 5,000 parts per hour with a variable speed motor. Feed components by hand or with tubes (TO-220s)...
Peel Back Force Tester (PBFT)
Proven Peel Back Force Measurement Supplying consistent SMT carrier packaging is critical for customers using SMT pick-and-place machines. Nothing will stop a production line faster than carrier cover tape that doesn’t peel back pr...
Precision Lead Former for Axial Components (CF-8)
Eliminate Body Stress with Versatile CF-8 GPD's CF-8 eliminates component body stress. Versatility is the key word for the CF-8. Simple tooling changes make short or long run production jobs quick and easy. Capabiliti...
High Precision Dispenser - MAX Series (Non-Heated)
High Precision Dispensers - MAX Series (Non-Heated) Max Series is capable of a wide variety of dispense applications including MicroVolume, Solder Paste and Conductive Adhesive, Underfill, Surface Mount Adhesive, Dam and Fill, Encapsulat...
Precision Auger Pump
New Advanced Precision Auger Pump - Single Pump Solution The Precision Auger pump is designed to work with mid-to-high viscosity liquid such as glues, conductive, and non-conductive adhesive and pastes. The pump is controlled with...
Large / Versatile Board Processing - DS Series Dispenser
When Applications Require Large Board Processing &/or Versatility The DS Series of dispensers is a robust, large format platform designed to handle all types of applications with ease. Ideal for dispense applications utilizing adhesi...
SMT Dispensing Pumps for Integration
Retrofit existing system with Innovative Dispensing Technology for Excellent Dispense Control and Repeatability Advanced pump technologies available for retrofitting include: True Volumetric Pump, Precision Auger Pump, Simplified...
Benchtop Dispense Robots
Full-featured and compact benchtop dispense system robot offering accurate and repeatable dispense results! A benchtop dispense system does not mean "no features". The Catalina benchtop dispense system is a ful...
Jetting Pump - NCM5000
Jetting Simplified Jetting pumps are excellent for dispensing small volumes of fluid at high rates of speed. The NCM5000 simplifies jetting to its basic elements - this means easy set up, cleaning, and maintenance for you. The drive syst...
A Manufacturer of High Quality, Precision, Automated Fluid Dispensing and Conformal Coating Systems, SMT Cover Tape Peel Tester and Lead Forming machines for through-hole component preparation.
Grand Junction, Colorado, USA
PillarDOT
Simple drop-jet fluid deposition system The Pillarhouse Drop-Jet head can be used to spray fluids at any angle in either upward or downward directions. With its patented easy bleed and cleaning feature it is ideal for automation...
Pillarhouse Orissa Synchrodex Pro
Enhanced, flexible, in-line, modular selective soldering system Designed as a modular system, the Synchrodex Pro range of in-line equipment offers the ultimate in flexibility with the ability to upgrade to high-speed throughput when mult...
Pillarhouse Quadron (PLC)
High specification, bench top rotary table soldering machine A versatile four station rotary bench top soldering machine, ideally suited for high or low volume production, the Quadron combines well proven pumped soldering techniques with...
Pillarhouse Jade Prodex
Ultra-flexible, offline, multi-platform, quick load twin PCB rotary table selective soldering system Designed to meet the needs of the small batch manufacturer who requires high levels of production flexibility. The Jade Prodex offers th...
Pillarhouse Jade Handex
Designed to meet the needs of lean manufacturing, the Jade Handex offers high-speed flexible throughput at minimal cost. The Jade Handex is equipped with a revolutionary twin PCB rotary table transport system to allow simultaneous load/unl...
Pillarhouse Orissa Synchrodex Combo
In-line or stand-alone fluxer/pre-heater This compact modular in-line system utilises the same design concept as the new generation Synchrodex soldering cell and offers the user significantly reduced process time when compared to using a...
Pillarhouse Orissa Fusion
High speed, in-line, multi-platform selective soldering system Incorporating high-speed PCB transfer, the Orissa Fusion platform offers the ultimate in flexibility, coupled with reduced line length at a lower cost compared to current mar...
Pillarhouse Orissa Fusion In-Line Selective Soldering
High speed, in-line, multi-platform selective soldering system Incorporating high-speed PCB transfer, the Orissa Fusion platform offers the ultimate in flexibility, coupled with reduced line length at a lower cost compared to current mar...
Pillarhouse PillarGEN 30/40/80 Nitrogen Generator
Cost effective Nitrogen generating systems The PillarGEN Nitrogen generation system has been specifically designed to meet the Nitrogen supply requirements of the current range of Pillarhouse selective soldering systems. The latest...
Selective soldering machine - Entry level
Entry-level, single point selective soldering system Designed to meet the needs of the small/medium batch manufacturer who requires high levels of production flexibility, the Jade MKll entry-level system offers uncompromised selective so...
Pillarhouse Orissa Synchrodex
Flexible, in-line, modular selective soldering system Designed as a modular system, the Synchrodex range of in-line equipment offers the ultimate in flexibility with the ability to upgrade to high speed throughput when multiple modules a...
Pillarhouse - Entry level selective soldering The Pilot
To see more visit Pillarhouse here: https://www.pillarhouse.co.uk/products/selective-soldering-handload/pilot-handload Economical, compact, single point selective soldering system The all-new ultra-low-cost Pilot machine has be...
Pillarhouse Jade Pro
Ultra-flexible, offline, multi-platform selective soldering system Designed to meet the needs of the small batch manufacturer who requires high levels of production flexibility. The Jade Pro offers the ability to regularly change solder...
Pillarhouse Jade MKIV
Enhanced, entry-level, single point selective soldering system With all the proven features of the Jade MKII, the Jade MKIV sets even higher standards of performance. Designed to meet the needs of the small/medium batch manufac...
Pillarhouse Orissa Fusion
High speed, in-line, multi-platform selective soldering system Incorporating high-speed PCB transfer, the Orissa Fusion platform offers the ultimate in flexibility, coupled with reduced line length at a lower cost compared to current mar...
Pillarhouse Jade MKII
To see more about the Jade MKII Single Point Selective Soldering System visit Pillarhouse USA at: https://www.pillarhouse.co.uk/products/selective-soldering-handload/jade-mkii-handload Entry-level, single point selective soldering system...
PillarPAD
An offline process programming system Allows easy creation of flux, pre-heat and solder joints and baths Produces graphical representations of the PCB Solder nozzles shown as actual size Uses industry...
Smart Factory 1.0
Smart Factory 1.0 The Pillarhouse Smart Factory 1.0 implementation allows a customer to monitor the performance of all their Pillarhouse Selective Soldering Systems. This can be across a single production line, a production facili...
Barcodes and Board Traceability
Barcodes and Board Traceability Allows automatic process program selection and board traceability, both locally and remotely. Notes Currently supported barcode readers include: Symbol – DS6700, LS2208...
Quadron (PLC)
High specification, bench top rotary table soldering machine A versatile four station rotary bench top soldering machine, ideally suited for high or low volume production, the Quadron combines well proven pumped soldering techniques with...
Global OEM manufacturer of selective wave soldering machines. With a world-wide install base in over 65 countries, we are a global leader in the selective soldering space. Highly customized solutions available in all industries.
Elk Grove Village, USA
Equipment Dealer / Broker / Auctions, Manufacturer, Manufacturer's Representative, Training Provider
Golden State Assembly - Wire Harnesses & Electromechanical Assemblies
Wire harnesses, electromechanical assemblies (box builds, subassemblies, PCBAs, kits, etc.), services (sorting, rework, value additive wire harness manufacturing engineering). Golden State Assembly is currently on the lookout...
Golden State is a contract manufacturer that makes wire harnesses, electromechanical assemblies (box builds, subassemblies, PCBAs, kits, etc.) and services (sorting, rework, value additive manufacturing engineering)
Morgan Hill, USA
IPC-A-610 Specialist (CIS) - Training and Certification
This 3-day, lectured course utilizes the images in the IPC-A-610 inspection document to provide visual accept/reject criteria examples for all three classes of assembly production–in both lead and lead-free. The IPC-A...
IPC-A-620 Instructor (CIT) - Training and Certification
Cable Wire Harness Assemblies Training This 4-day, lectured course is a comprehensive, instructor-level certification that teaches inspection and assembly criteria for all three classes of cable and wire harness assembl...
IPC-7711/7721 Standard Expert (CSE) Certification Training Course
If you are looking at becoming a subject matter expert in IPC-7711/21, “Rework, Modification and Repair of Electronic Assemblies” without the need to provide any IPC Certification to others, then this is the program for y...
IPC-A-620 Standard Expert (CSE) Certification Training Course
If you are looking at becoming a subject matter expert in IPC/WHMA-A-620, “Requirements and Acceptance for Cable and Wire Harness Assemblies” without the need to provide any IPC Certification to others, then this is the p...
Hands-On Cable Wire Harness Lab
This 1-day, hands-on lab may be added to either the IPC-A-620 Certified Trainer or IPC-A-620 Certified Specialist course. The IPC/WHMA-A-620 is the most widely used Inspection Specification for the cable and wire harness assembly industry. I...
J-STD-001 Instructor (CIT) - Training and Certification
This is a combination lectured and hands-on course covering the information in the IPC J-STD-001 document. The J-STD-001, “Requirements for Soldered Electrical & Electronic Assemblies”...
J-STD-001 Aerospace Addendum - Training and Certification
The J-STD-001 Space Electronics Hardware Addendum provides additional requirements over those published in IPC J-STD-001 to ensure the reliability of soldered electrical and electronic assemblies that must survive the vibration and thermal c...
Hand Soldering Certification
Customize this course by selecting only the days/modules that meet your training requirements. Using both lead and lead-free alloys, Hand Soldering Operator Certification introduces the basics of soldering in Wires &a...
Counterfeit Components Workshop
In cooperation and partnership with IDEA, this course provides a basic introduction to Counterfeit Mitigation as well as an introduction to IDEA-STD-1010, including training in methods for the visual detection of counterfeit and substandard...
IPC-A-600 Instructor (CIT) - Training and Certification
Bare Board Inspection Training This 3-day, lectured course utilizes the images in the IPC-A-600 document to provide visual accept/reject criteria examples for all three classes of bare board fabrication and inspection....
IPC-6012 Specialist (CIS) Certification Training Course
If you are looking for a comprehensive program that will develop your understanding of design, specifications, fabrication and inspection of printed circuit boards (PCBs), this is the certification for you. The IPC-6012 “Qualificat...
Advanced Micro SMT Hand Soldering
If you are working with the smallest of small, surface mount components in either placement or rework of, this is the course for you. This two (2) day Advanced Surface Mount Micro Hand Soldering program focuses on the pro...
IPC-6012 Instructor (CIT) Certification Training Course
If you are looking for a comprehensive program that will develop your understanding of design, specifications, fabrication and inspection of printed circuit boards (PCBs), this is the certification for you. The IPC-6012 “Qualificat...
IPC Designer Certification
The IPC Designer Certification or CID (Certified Interconnect Designer) is the industry’s premier professional development program directly focused on PCB design philosophy and requirements. If your passion is the transformation of electrica...
Interactive Inspection Lab
This is a 1-day course utilizing lectures, visual acuity exercises, and physical assemblies to provide the students with an experience in visually inspecting printed circuit assemblies. Knowledge base programs identify di...
IDEA-STD-1010 Essentials
In cooperation and partnership with IDEA, IDEA-STD-1010 Essentials is designed to develop an in-depth knowledge of the IDEA-STD-1010 “Acceptability of Electronic Components Distributed in the Open Market” standard and a t...
IPC-A-620 Specialist (CIS) - Training and Certification
Cable Wire Harness Assemblies Training This 4-day, lectured course is a comprehensive, operator-level certification that teaches inspection and assembly criteria for all three classes of cable and wire harness assembly....
IPC-7711/7721 Specialist (CIS) - Training and Certification
Component Rework/Board Repair Training This is a 5-day, advanced course for anyone responsible for quality and reliability of reworked or repaired electronic assemblies. It is a comprehensive hands-on training program w...
IPC-7711/7721 Instructor (CIT) - Training and Certification
Component Rework/Board Repair Training This is a 5-day, advanced course for anyone responsible for quality and reliability of reworked or repaired electronic assemblies. It is a comprehensive hands-on training program w...
IPC-A-610 Instructor (CIT) - Training and Certification
This 4-day, lectured course utilizes the images in the IPC-A-610 document to provide visual accept/reject criteria examples for all three classes of assembly production–for both lead and lead-free. The IPC-A-610, “The Acc...
EPTAC is an internationally recognized solder training and IPC certification corporation, giving professionals the skills to accelerate their careers, and businesses the talent to succeed.
Manchester, New Hampshire, USA
Manual V Cut PCB Depanelizer PCB Board Cutter
Manual V Cut PCB Depanelizer PCB Board Cutter It is widely used in modern rigid PCB industry. Manual V Cut PCB Depanelizer Machine Features: 1. Simple operation, spee...
Top Cutting PCB Router PCB Depanelizer Machine
Stand Alone Ionizer PCB Depaneling Router Twin Tables and Top Cutting PCB Router Features: • Floor type double table cutting machine, with a speed of 100 mm / s and a positio...
PCBA CNC Router Machine Automatic PCB Milling Machine
PCBA CNC Router Machine Automatic PCB Milling Machine PCBA CNC Router Machine Advantages: X10 zoom-in image makes programming easier&increase the accuracy of point setting....
Burr Free Non-Contact PCB Laser Cutting Machine
Laser PCB Cutting Machine Function: The equipment is mainly used in the cutting 5G materials such as CCM / COB / LCP / MPI / COF / cop / pi / CPI in consumer electronics. The equipment integrates high-speed and high-p...
Offline Dual Table PCB Depaneling Router with SycoTec Spindle 4025HY
Offline Dual Table PCB Depaneling Router Machine with SycoTec Spindle 4025HY PCB Depaneling Router Features: 1. Two-slide PCB Separator 2. Low stress 3. Sharp cutting edge...
Mini Standalone PCB Depaneling Router Machine Economic PCB Separator Machine
Mini Standalone PCB Depaneling Router Machine Economic PCB Separator Machine PCB Depaneling Router Features: Smooth cutting edge Low cutting stress Manul loadi...
Inline V-Cut PCB Separator Machine Multi-blade PCB Depanelizer
Inline V-Cut PCB Separator Machine Multi-blade PCB Depanelizer Inline PCB Separator Functions: 1. This machine is used for PCB board depaneling after inserter. 2. It...
5-Blade Precise V-groove PCB Separator Circular Blade PCB Depaneler
5-Blade Precise V-groove PCB Separator Circular Blade PCB Depaneler PCB Depanelizer Features: 1. Separates panels up to 0.1" 2. The longest panel: No lim...
Auto Feeding And Loading Full Automatic V-cut PCB Depaneler
Full Automatic V-cut PCB Depaneler Introduction: This equipment can further improve the quality of depaneling. It can realize V-groove XY two-way automatic cutting, cutting aluminum & FR4 boards without burr, can...
FPC / PCB Punching Dies PCB Depaneler For High Volume Boards Singulation
FPC / PCB Punching Dies PCB Depaneler For High Volume Boards Singulation Advantages: 1. Pneumatic, environmental protection 2. High efficiency, suitable for high volume PCBs...
UV Laser PCB Depaneling System, Dual Table for High Volume
UV Laser PCB Depaneling System, Dual Table for High Volume Laser Depaneling Purpose: The processing and application objects are PCB, FPC soft and hard plate and related material cutting, c...
V Groove Automatic PCB Depaneling Machine PCB Pizza Cutter
V Groove Automatic PCB Depaneling Machine PCB Pizza Cutter Automatic PCB Depaneling Machine Instroduction: Widely used in the Manufacturing Machinery Electronic Products, aerospace,...
Metal Board V-cut PCB Depaneling Machine Guillotine PCB Cutter
Metal Board V-cut PCB Depaneling Machine Guillotine PCB Cutter Features: 1. Less stress ,high cutting quality 2. Suitable for cutting all kinds of PCB material, even for Alumin...
Bottom Cutting Automatic PCB Depaneling Router Machine with 3HP Vaccum Cleaner
PCB Router Function: Used for routed PCB panel singulation with lower stress. PCB Router Advantages: Lower mechanical stress Precise tooling ...
Automatic V-cut PCB Depanelizer Machine
Automatic V-cut PCB Depanelizer Machine V-cut PCB Depanelizer Application: 1. Cutting Materials: Aluminum Board, PCB Board, Soft Fiber, clean and burr-free, high speed and effec...
15W UV Laser Economic PCB Laser Depaneling System
15W UV Laser Economic PCB Laser Depaneling System PCB Laser Depaneling System Specification: Laser solid-state UV laser...
Customized Die Tooling FPC PCB Punching Machine
Flexible PCB Board Cutting Machine PCB Punching Machine With Cutomized Die Tooling PCB Punching Machine Features: 1. Depaneling PCB/FPC by means of punching dies, to avoid micro-cracks cau...
Full Automatic PCB Depaneling Router Machine PCB Separator Without Fixture
Full Automatic PCB Depaneling Router Machine PCB Separator Without Fixture Our Service: 1. Lifetime technical support and 2 years warranty. 2. Free replacement or refund would be don...
Multi Blade V-Cut PCB Cutting Machine LED Strip PCB Separator
Multi Blade V-Cut PCB Cutting Machine LED Strip PCB Separator V-cut PCB Cutting Machine Features: 1. It can cut many boards with multiple sets of knives work at the same tim...
Dual Table High Speed Four Axis Visual PCB Router Milling Cutter 350x400mm
350x400mm Dual Table High-speed Four-axis Visual PCB Router Milling Cutter PCB Router Machine Features: This system has two-slide tables for high volume production. And it has...
Manufacturer of PCB depaneling and PCB soldering machines since 2005, products include CE approval V-groove PCB depanelizer, PCB router, PCB punching machine, laser depaneling, hot bar soldering machines and soldering robots.
Huizhou, China
Unisoft ProntoAOI - AOI Machines Programming Software
ProntoAOI is used by electronic manufacturers to quickly program their Automatic Optical Inspection (AOI) machines and X-RAY Equipment. ProntoAOI programs most popular AOI Equipment such as YESTech, Mirtec, Orbotech,...
Unisoft ProntoVIEW-MARKUP - Assembly CAD Viewer & Gerber Viewer Software
ProntoVIEW-MARKUP is assembly CAD Viewer & Gerber Viewer software used by electronics manufacturers to quickly find components, pin, shorts between traces, etc. ProntoVIEW-MARKUP is also a redline tool that allows annotation of the as...
Unisoft ProntoPLACE
ProntoPLACE used by electronics manufacturers will quickly program your surface mount SMT and thru-hole assembly equipment. In minutes Unisoft ProntoPLACE software translates CAD or Gerber and Bill of Materials (BOM) file...
Unisoft ProntoSELECTIVE-SOLDERING software
ProntoSELECTIVE-SOLDERING is used by electronic manufacturers to quickly program their Selective Soldering machines. ProntoSELECTIVE-SOLDERING helps program most popular Selective Soldering machines such...
Unisoft ProntoGERBER CONNECTION - Gerber Translation Software
If you have only Gerber data files to work with then ProntoGERBER-CONNECTION can help you! ProntoGERBER-CONNECTION imports raw Gerber data and allows the user to add intelligent information to the shapes on th...
Unisoft ProntoTEST-FIXTURE - ATE (Automatic Test Equipment) Software
ProntoTEST-FIXTURE used by electronics manufacturers will accurately setup your Automatic Test Equipment (ATE), Flying Probe and design your "bed of nails" test fixturing. In minutes Unisoft ProntoTEST-FIXT...
Unisoft CELLS - Product Tracking MES Software
Affordable Manufacturing Execution System (MES), Shop Floor Automation and Integration Software CELLS WORKFLOW Product Tracking MES is an affordable full Manufacturing Process Control Software System providing Plant Intelligence fo...
PCB Electronics Manufacturing Automation Software for EMS, OEM & ODM manufacturers. Over 3000 customers worldwide!
Milford, Connecticut, USA
Vertical Curing Mini Oven - Heller 755
The mini vertical oven has a cycle time of 25 - 60 seconds per 150mm fixture, 4mm Edge Hold Pins and Guides. PCBs up to 250mm wide can be processed. Dual Feed option for high throughoutput. In-line, vertical automation...
Dual Lane / Dual Temperature SMT Reflow Oven - 1910 MK5
Dual Chamber Module - Dual Chambers + Dual Blowers + Dual Heaters + Dual T/Cs. Bifurcated (Dual) chamber reflow oven allows 2 different thermal profiles to run simultaneously in the same reflow oven foot pr...
Vertical Curing Oven - Heller 788
Heller 788 In-line, Continuous Cure, Vertical Format Oven This elevator format oven utilizes vertical space to accomodate curing applications of up to 4 hours while only occupying 96" (2.5m) of fl...
Flux Free Formic Acid Reflow Oven - 1936 MKV
Flux Free Formic Reflow Reflow in Formic Acid Vapor Heller has designed and built an production ready horizontal reflow oven for formic acid vapor. This new oven has been designed to...
SMT Reflow Oven - 1826 Mark 5
The World's Best SMT Convection Reflow Ovens for Large Boards and Dual Lane 1826 Mark 5 reflow oven provides consistent performance for high volume reflow requirements while minimizing preventative maintenance and floorspace....
Convection Reflow Oven Mk7
Convection Reflow Oven The World's Best Convection Reflow Oven for High-Throughput The New reflow oven platform revolutionizes the...
Voidless / Vacuum Reflow Soldering Oven - 1809 MK5
1809 MK5 - Heller Advanced In-Line Vacuum Reflow Oven Nitrogen System with Balanced Flow Technology 9 Top And Bottom Heated Zones - highest zone count per linear foot in the industry!&...
High Volume Reflow Oven - 1936/2043 Mark5
The World's Best Convection Reflow Oven The ultimate high volume production reflow oven with belt speeds up to 1.4 m/min to accommodate the fastest pick and place systems....
860 Pressure Curing Oven (PCO)
A Pressure Cure Oven (PCO), or Autoclave, is used to minimize voiding and increase adhesion strength for bonding processes typically used in die attach and underfill applications. PCO pressurizes air into a...
Reflow ovens for automated SMT PCB assembly, specializing in lead free processing and nitrogen reflow. The best convection reflow ovens on the market.
Florham Park, New Jersey, USA
Juki Pick and Place Equipment
Lewis and Clark is the leading provider of Juki Pick and Place equiment. Try out our Feeder Frenzy Depot for all of your Juki Feeder and Feeder Repair needs!...
Samsung Pick and Place
Lewis and Clark is the industry leader in pre-owned Samsung Pick and Place equipment! Make sure to check out our Feeder Frenzy Depot for all your Samsung Feeder needs and Feeder repairs~...
Universal Instruments -UIC Pick and Place Equipment
#1 Stop for all of your Universal Instruments Pick and Place needs Visit our Feeder Frenzy depot to load up on quality pre-owned feeders and feeder repairs~...
Nordson Asymtek Conformal Coating Systems
Lewis and Clark, Inc. offers the largest variety of pre-owned Nordson Asymtek Conformal Coating Systems Looking to sell your conformal coater? Let us know! Lewis and Clark is always looking t...
Assembleon / K&S Pick & Place Equipment
Lewis and Clark is the industry leader in pre-owned Assembleon / K&S Pick and Place equipment! Make sure to check out our Feeder Frenzy Depot for all your Assembleon / K&S Feeder needs and Feeder repairs~&...
Fuji Pick and Place Equipment
We buy and sell a majority of all Fuji Pick and Place Machines! With our Feeder Frenzy depot dedicated to the sale of quaility pre-owned Fuji feeders and repairs...
DEK Screen Printers
Lewis and Clark, Inc. has the largest inventory of quality pre-owned DEK Screen Printers....
Speedline MPM Screen Printers
Lewis and Clark, Inc. home to the largest inventory of pre-owned Speedline MPM Screen Printers....
Vitronics Soltec Reflow Oven
Lewis and Clark offers the largest variety of quality pre-owned Vitronics Soltec Reflow Ovens! Ready to sell your Vitronics Soltec Reflow Oven? Let us know! We are always looking to buy~...
Mirae Pick and Place
Lewis and Clark is the industry leader in pre-owned Mirae Pick and Place equipment! Make sure to check out our Feeder Frenzy Depot for all your preowned Mirae Feeder needs and Feeder repairs~...
Mirtec AOI
Lewis and Clark, Inc. offers the largest variety of pre-owned Mirtec AOI systems....
Panasonic Pick and Place
Lewis and Clark is the industry leader in pre-owned Panasonic Pick and Place equipment! Make sure to check out our Feeder Frenzy Depot for all your preowned Panasonic Feeder needs and Feeder repairs~...
BTU Reflow Oven
Lewis and Clark, Inc. offers the largest inventory of pre-owned BTU Reflow ovens. Ready to sell your BTU Reflow Oven? Let us know! We are ready to buy~...
Mydata Pick and Place Equipment
Lewis and Clark is the industry leader in pre-owned Mydata Pick and Place equipment. We are able to offer value add services and provide feeder packages (seperately). Are you ready to sell your Mydata/...
Lewis and Clark is your #1 Pre-Owned Surface Mount and In-Circuit Test equipment supplier. We offer a variety of equipment solutions at a significant cost savings over new.
Nashua, New Hampshire, USA
PCB cutting machine|PCB V-cut separator
PCB separator as PCB depaneler V-cut separation equipment that mainly use for the PCB assembly in the large mass production with the high efficiency and save a lots of labor for the manufacturer. Most of time, one set of this t...
moving cutter PCB separator
Motorized pcb depanelers With circle knife above and anvil blade below, when the board flow to the anvil blade, shift the switch, and the anvil blade move laterally to the set point, then the PCB board is cut off with smooth incision and no...
manual PCBA separator
manual PCBA separator and pcb cutting equipment and cutting pcb machine can be used for aluminum substrate,FR4,CEM-1,MCPCB multiple type material ,it can suitable for cutting maximum 4mm thickness PCB panel without the bend and twist wi...
automatic PCB multi magazine unloader with multi track for SMT assembly
automatic PCB multi magazine unloader with multi track with multi rails to work with SMT Magazine Rack that feeds PCBs into the Magazines from the SMT process line ASCEN technology co.,...
PCB Depanelers/depanelizing pcb/PCB depanelizer/PCB cutter/ 基板分割機.基板切断機
The PCB Depanelers more detail and video please check the link: www.pcb-separator.com Any inquiry please sent the email to : info@pcbasc.com ...
SMT automatic PCB magazine loader unloader for PCB printed circuit board
SMT automatic PCB magazine loader unloader is used to receive PCB printed circuit board in DIP production line,After AOI machine to receive the signal given by AOI ASCEN technolog...
automatic PCB magazine loader for SMT assembly
automatic PCB magazine loader as SMT line automatic PCB magazine loader that feeds PCBs into the Process Line from Stacks or Magazines.The unit loads the production line automatically by pushing PCBA out of a magazine onto the conv...
V-cut cutting machine
V-cut cutting machine For internal strength generates during separation, Minimize it to value under 180uE ,to avoid PCB solder crack or component damage If you want know how to choose the best PCB sep...
Why ASCEN PCB depaneling machine PCB separator is your best choose
PCB depaneling machine 620 model from ASCEN technology, this PCB depaneler with high cutting precision, because the pneumatically driven control, ASCEN pcb depaneling machine shearing process without vibration...
PCB reject conveyor
PCB reject conveyor and PCB conveyor and SMT reject conveyor from ASCEN allows PCB printed circuit board manufacturers to easilly isolate bad or reject boards from SMT production line,PCB board rejection is based on up-line process input, ty...
automatic PCB magazine unloader for SMT assembly
automatic PCB magazine unloader unloads the SMT production line automatically by pushing PCBA out of a magazine onto the conveyor of the down-stream machine. ASCEN technology co.,ltd is ...
robotic radial tape feeder
ASCEN robotic radial tape feeder process include feeding the tape,cutting and 90 degree bending the radial component,it can as SMT insertion component feeder use to connect the SMT component insertion machine fo...
auto PCB magazine loader
auto PCB magazine loader is used at the starting of the SMT production line for loading of PCBA to the line Description: 1) Machine Size(L*W*H):1700*780*1200...
SMT line loader
SMT line loader /PCB magazine loader equipment from ASCEN manufacturer Description: 1) Machine Size(L*W*H):1700*780*1200 2) 2)Special Aluminum al...
Midrange stick feeder
ASCEN Midrange stick feeder is a SMT taped stick tube feeder, component raidal tube feeder developed for the customer required and that is not a standard machine. ASCEN technology co.,ltd&...
SMT taped stick tube feeder
ASCEN SMT taped stick tube feeder can loading the all kinds of DIP tube pack component or parts onto all kinds of SMT mounter for automated online feeding and then to realize automatic plug-in operation, it can...
PCB printed circuit board conveyor
ASCEN PCB printed circuit board conveyor design is modular and sectional, with clean, quiet, and ESD safe operation. The PCB handling conveyor features bidirectional operation with an open center, slip-roller for accumulat...
ASCEN PCB depaneling machine pcb cutting equipment
PCB depaneling machine use for the electronic factory that cover the PCBA manufacturing,LED lighting,electronic product assembly. ASC-620 cutting equipment can use for cutting LED long board and also can use t...
PCB depaneling machine with low price on your line
PCB depaneling often happen right after SMT processing or after soldering,or after in-circuit test in the assembly line.PCB depaneling machine to be a important equipment in high-volume electronics assembly production....
SMT automatic pcb loader
SMT automatic pcb loader is used at the starting of the SMT production line for loading of PCBA to the line Description: Compact Loaders suction...
Manufacturer of automated production systems;PCB magazine loader,PCB separator,PCB cutting machine,PCB unloaders, PCB conveyors,PCB depaneling machines,PCB turn conveyors,PCB conformal coaters,PCB solder paste printer,PCB buffer
Dongguan, China
듀얼 레인 / 이중 온도 리플로우 오븐 - 1910 MK5
듀얼 챔버 모듈 - 듀얼 챔버 + 듀얼 블로어 + 듀얼 히터 + 듀얼 T/C 두 갈래로 나뉘어진 듀얼 레인 / 이중 온도 리플로우 오븐 챔버가 동일 리플로우 오븐 풋프린트에서 2개의 다른 열 프로파일이 동시에 운행될 수 있도록 합니다. 두 갈래로 나뉘어진(듀얼) 기능...
1809 MK5 - Heller 고급 인라인 무보이드 / 진공 리플로우 솔더링 오븐
9개 존을 갖춘 무보이드 진공 리플로우 솔더링 오븐. 균형적 흐름 기술이 있는 무보이드 / 진공 리플로우 솔더링 질소 시스템 9개의 탑 및 바텀 가열 존 - 업계 최고의 직선형 피트당 최고의 존 수! 100인치 가열 길이 - 고처리율 제공! 2개의 내부...
고처리율 애플리케이션을 위한 세계 최고의 SMT 컨벡션 리플로우 오븐 - Mark7
뉴 MK7 플랫폼이 새롭고 획기적인 여러 디자인으로 리플로우 업계를 혁신하고 있습니다! MK7은 보다 낮은 델타 T, 질소 소비 절감 및 전체 생산 플로어의 관찰이 쉽도록 하는 새로운 저고 패키지로 PM 확장에 대한 모든 고객의 요청이 통합되어 있습니다. 생산을 위한 MK7의 강력한 장점을 직접 확인할 수 있도록 당사의 세 곳 중 어느 곳이든 방문해 프로파일을 수행하고 데이터를 수집해 보실 수...
무플럭스 리플로우 솔더링을 위한 포름산 리플로우 오븐 - 1936 MKV
포름산 증기에서의 무플럭스 포름산 리플로우 Heller는 포름산 증기를 위한 수평형 무플럭스 포름산 리플로우 오븐을 설계해 생산에 활용할 수 있도록 제작했습니다. 이 새로운 오븐은 세미(Semi) S2/S8 안전성 표준(유독가스 포함)에 적합하도록 설계되었습니다. 포름산은 무플럭스 솔더 리플로우에서 효과적인 환원제로 보여져 왔습니다...
Heller 788 인라인, 지속적 큐어, 수직형 포맷 오븐
생산성 향상, 품질 개선, 비용 절감은...Heller의 수직형 포맷 큐어링 솔루션과 함께. 에폭시 큐어 공정의 인라인, 수직형 자동화가 세 분야에서 즉각적이고 유의미한 혜택을 제공합니다. 인라인 자동화는 배치 오븐의 적재 및 하적에 필요한 노동을 없애 생산성을 증대합니다. 이는 배치 오븐 도...
860 가압 큐어링 오븐(PCO)
다이 어태치 및 언더필 가압 큐어링 오븐 가압 큐어링 오븐(PCO) 또는 오토클레이브는 일반적으로 다이 어태치 및 언더필 애플리케이션에서 사용되는 접착 공정에서 보이드를 최소화하고 접착강도를 증대시키기 위해 사용됩니다. PCO pressurizes air into a rigid vessel and heats & coo...
대량 생산을 위한 컨벡션 리플로우 오븐. - 1826 Mark 5
세계 최고의 컨벡션 리플로우 오븐 대량의 요구에도 일관된 성능을 제공하는 동시에, 예방적 유지관리와 바닥면적은 최소화합니다 무납 인증! 유지관리 불필요! 최저의 질소 & 전기 사용! 무료로 제공되는 통...
Heller VCO 755 인라인, 지속적 큐어, 수직형 포맷 미니 큐어링 오븐
큐어링 에폭시의 수직형 자동화를 위한 소형 큐어링 오븐. 생산성 향상, 품질 개선, 비용 절감은...Heller의 수직형 포맷 큐어링 솔루션과 함께. 에폭시 큐어 공정의 인라인, 수직형 자동화가 세 분야에서 즉각적이고 상당한 혜택을 제공합니다....
1936/2043 Mark 5 – 리플로우 오븐 시스템
가장 빠른 픽앤플레이스 시스템을 제공하는 분당 1.4M의 최대 벨트 속도를 갖춘 최강의 대량 리플로우 오븐 시스템. 무납 인증! 유지관리 불필요! 최저의 질소 & 전기 사용! 무료로 제공되는 통합 Cpk 소프트웨어!...
-세계 최고 품질의 대류열풍방식으로 새로운 표준을 선도하는 HELLER Reflow Oven -10년 연속 World Wide Market Share 1위와 2014 SERVICE EXCELLENCE AWARDS 수상
Kyungki-Do, Jamaica
IPC Training & Certification
IPC's Professional Development department sponsors certification programs for acceptability of electronics assemblies; soldering; repair/rework; and acceptability of printed boards. In addition, a wide variety of video and computer based tr...
IPC Standards
IPC standards, the results of industry consensus and collaboration, are respected throughout the whole world. Using IPC standards allows manufacturers, customers and suppliers to speak the same language....
IPC Market Research
The Electronics Industry’s Source of Data and Insights for Smart Business Decisions. The IPC Technology Market Research Council offers members unique and customized research for the electronics assembly industry. Network with...
Association Connecting Electronics Industries (IPC)
IPC is the trade association for the printed wiring board and electronics assembly industries.
Bannockburn, Illinois, USA
Association / Non-Profit, Events Organizer, Training Provider
Hydrotrue® RO 200 Series Water Treatment System
Hydrotrue® RO 200 series water treatment system Designed for DriSteem equipment and stand-alone operation, the Hydrotrue RO 200 series reverse osmosis water treatment system...
CDS dehumidifier RL series
DriSteem is introducing a brand-new selection of refrigerant-based dehumidifiers available to ship within 5 business days or less. These units are an excellent fit for commercial applications and replacement opportunities. Dehumidification...
Hydrotrue® RO 400 Series Water Treatment System
Hydrotrue® RO 400 series water treatment system Designed for DriSteem equipment and stand-alone operation, the Hydrotrue RO 400 Series reverse osmosis water treatment system significantly reduc...
XT Humidifier
XT Series electrode humidifiers provide humidification for a wide range of buildings, including health care, commercial, industrial, and government facilities. Easy installation and cylinder replacement together with minimal maintenance make XT Serie...
Adiatec® Ultrasonic Humidifier
The DriSteem Adiatec ultrasonic humidifier provides evaporative cooling and humidification in room or in AHU/duct for application flexibility. Ultrasonic units humidify using high frequency oscillation of piezoelectric transducers, causing mist to...
Hydrotrue® Pre-treatment Systems
Hydrotrue water softener systems The easiest and most cost-effective way to maintain humidification capacity and to reduce maintenance requirements is to install a Hydrotrue water softener system. Operating with...
GTS® Humidifier LX Series
The GTS humidifier LX Series is the only gas-fired humidifier that combines the highest efficiency on the market with ultra-low NOx in a single design. Thermal (combustion) efficiency 94% Higher Heating Value (...
DriSteem provides reliable and efficient humidity control, evaporative cooling, and water treatment solutions for commercial and industrial applications.
Eden Prairie, USA
Quantum™ Q-6800 In-Line, Large-Format Fluid Dispensers
ASYMTEK Quantum Q-6800 High-Value Fluid Dispensing System. ASYMTEK Quantum Q-6800 Series. A high-value fluid dispensing solution for demanding applications. Large dispense area (423 x 458 mm) for varied substrate sizes...
ASYMTEK SC-450 PreciseCoat Jet
Get more precision, process options, useability, yield, and uptime with the SC-450 PreciseCoat® conformal coating jet. The SC-450 PreciseCoat conformal coating jet widens the viscosity range to provide more process options. It's...
EasyCoat 6 Conformal Coating Software
EasyCoat® 6 software for conformal coating systems delivers intuitive visual programming Nordson ASYMTEK's EasyCoat® software provides precise conformal coating with process control, traceability, and intuitive visual program...
Fids-on-the-Fly High-Speed Fiducial Capture
Nordson ASYMTEK’s Fids-on-the-Fly™ option is up to 5.5X faster than the traditional stop-and-capture mode for locating fiducials. Reducing time spent performing this essential, non-dispense routine can increase UPH as much as...
Select Coat Conformal Coating Applicators - SC-350 Select Spray and the SC-300 Multi-Mode
The Select Coat Applicator Series – which includes the SC-350 Select Spray and the SC-300 Multi-Mode – is a highly-versatile conformal coating applicator that supports a wide range of fluid viscosities and is ideal for solvent or...
DV-8000C Heli-Flow Pump
The DV-8000C series Heli-Flow® pumps are the newest generation of encoded auger pumps. The pump has a fixed-head design for luer needle applications. The DV-8000 pump's rigid head and fluid path can withstand high pressures generated by t...
Qadence Flow Control for Conformal Coating
The ASYMTEK Qadence™ closed-loop flow control system maintains a stable flow rate by volume for high quality conformal coating results – automatically compensating for viscosity changes related to temperature, humidity and batch-to-bat...
DV-7000 Heli-Flow Pump
The DV-7000 Heli-Flow® pump is a third-generation encoded auger pump. The pump has a floating head for use with footed needles to make fast, repeatable dots of solder paste and silver epoxy. The dispense gap is mechanically controlled by the...
DJ-2200 DispenseJet Non-Contact Flux Jet
Flux application using the DispenseJet® pump is a superior alternative to screen printing and ultrasonic spray. Jet dispensing eliminates the overspray and material waste associated with ultrasonic and spray application methods. Flux...
ASYMTEK NexJet NJ-8 Jetting System with ReadiSet Jet Cartridge
The NexJet® 8 Jetting System with patented ReadiSet™ Jet Cartridge offers increased jet frequency combined with advanced consumable management - it's as easy as ReadiSet and Jet. ReadiSet Jet Cartridge reduc...
Vantage - Advanced Dispensing for Precision Packaging and Assembly
Our most advanced dispensing platform for electronics manufacturing The Vantage® Series is specifically designed for high-end advanced semiconductor package, electromechanical, and printed circuit board assembly. Create...
IntelliJet Jetting System with ReadiSet Jet Cartridge
The IntelliJet® Jetting System with patented ReadiSet™ Jet Cartridge delivers cutting-edge reliability and micro dot dispensing for manufacturing advanced semiconductor and mobile electronics packages The piezo-driven...
Select Coat SL-940 Conformal Coating System
The Select Coat® conformal coating machine provides the highest productivity and quality for your automated coating processes. Automate your conformal coating with state-of-the-art process controls, world-leading know-how, exp...
ASYMTEK Select Coat SL-1040 Conformal Coating System
With the Select Coat® SL-1040, we’ve retained the time-tested functionality of the Select Coat SL-940 and added significant system-level advancements to elevate automation, control, precision, and preventative maintenance for better yiel...
DV-03HPA High Pressure Valve with Suckback
The DV-03 is a air-actuated balanced spool valve for consistent dispensing of high viscosity fluids. For precision, you can control the amount of fluid dispensed by adjusting the fluid pressure, pulse time, and selecting the appropriat...
Forte - Advanced Dispenser
The Forte™ Series delivers exceptional dispensing productivity and accuracy for high-volume consumer electronics manufacturing, printed circuit board assembly, flexible circuit, MEMs, and electromechanical assembly applications. Next...
Viscosity Control System
The Viscosity Control System maintains consistent temperature of conformal coating fluids. The system includes a heated recirculating fluid circuit to eliminate viscosity changes in temperature-responsive materials. Close-range temperature monitor...
Panorama - Automated Conformal Coating Line Solutions
Nordson ASYMTEK designs automated conformal coating line solutions to fit your production process. Every Panorama™ line we build, includes the right balance of equipment and process control for optimal coating efficiency. If you&rs...
DJ-9500 DispenseJet High-Speed Jet Dispensing
The DispenseJet DJ-9500 supports a long list of jettable fluids for a wide range of applications. Incorporating over 15 years of jetting experience, the DJ-9500 jet provides even more capability than its DJ-9000 predecessor. Nordson ASYM...
DV-07 Adjustable Liquid Metering Valve
The DV-07 is a normally closed, air-actuated diaphragm valve The DV-07 dispenses low to medium viscosity fluids for a variety of applications from microdots to volume fill. The DV-07 valve tol...
ASYMTEK Products | Nordson Electronics Solutions
A leader in automated fluid dispensing, jetting, and conformal coating. Products include stand-alone dispensing workstations and fully automated, in-line conveyorized systems with advanced process controls.
Carlsbad, California, USA
Miniature Straight Flat Reamer/Straight Fork Tip (SH-20C) (5 1/2")
Standard Flat Reamer/Straight Fork Tip (SH-20A) (5 1/2") Description: Straight Flat Reamer...
NASA Style Lead Cleaner SH-66 Lead Cleaner
Use this quality tool to remove oxides, scale, grease and dirt from leads. The tinned copper braided shielding, backed by a stainless steel spring, ensures a fast and easy job. The lead cleaner meets NASA specification NP-200-4 and ensures the best w...
Soldering Rework Tools
The tool ends are made of high quality Swedish Hardened Tool Steel, carefully heat treated and tempered to provide a tough, long lasting working edge that resists wear....
ESD Safe Probes
The unique Beau Tech spudgers are made of special vulcanized fiber which has the most desirable mechanical, electrical, and thermal properties for applications on printed circuit boards....
Round Vulcan Shockproof Spudger, (SH-81) Screwdriver and Conical Ends. (5 1/2" x 5/16")
The unique Beau Tech spudgers are made of special vulcanized fiber which has the most desirable mechanical, electrical, and thermal properties for applications on printed circuit boards. Beau Tech spudgers have many advantages compared with...
Push Version Spring Hook SH-150 (9 3/4")
Use these convenient tools to insert, remove, and adjust fine springs and other small parts in hard to reach places. Made of quality polished tool steel and hardened to withstand high tension without breaking or bending. The fine diamond knurled hand...
Flat Shockproof Vulcan Spudger, (SH-80) Double Beveled and Conical Ends. (6" x 1/4")
Flat Shockproof Vulcan Spudger SH-80 Double Beveled and Conical Ends. (6" x 1/4") The unique Beau Tech spudgers are made of special vulcanized fiber which has the most desirable mechanical, ele...
Miniature Angled Flat Reamer/Straight Fork Tip SH-20D (5 1/2")
Angled Flat Reamer Miniature (left) & Standard (right)...
Stainless Steel Brush (3 1/2") SH-61
Made of over 300 long, fine, stainless steel bristles. Use to clean flux from solder joints, clean flux and adhesive from solder pad and for general cleaning purposes. Available in Standard and Miniature sizes. Stainless Steel Brush (3 1/2&...
Mirrors, Brushes, Spring Hooks, Lead Cleaners
The new inspection mirror meets clean room requirements yet is sufficiently economical for non-clean room applications. A quality tool for the technician but inexpensive enough to meet the budgetary requirement of modern manufacturing. E...
Inspection Mirror
Inspection Mirror (SH-133S) The new inspection mirror meets clean room requirements yet is sufficiently economical for non-clean room applications. A quality tool for the technician but inexpensive enough to meet the budg...
Probes
These Made in America, Beau Tech RocHard MilProbes are the only complete line of probes available to meet the full spectrum of circuit repair, rework, and assembly needs from Through Hole to 2 mil pitch Surface Mount....
Stainless Steel Brush (2 5/16") SH-60
Stainless Steel Brush (SH-60) 2 5/16" Made of over 300 long, fine, stainless steel bristles. Use to clean flux from solder joints, clean flux and adhesive from sold...
Orange Sticks SH-83
Orange Sticks with double beveled ends, 7" x 5/32" (SH-83) The Beau Tech orange sticks are made of high quality non-resin wood which will not contaminate solder and component leads. Natural wood is among...
Standard Straight Flat Reamer/Straight Fork Tip (SH-20A) (8")
Standard Flat Reamer/Straight Fork Tip (SH-20A) (8") Description: Straight Flat Reamer...
Pull Version Spring Hook SH-152 (9 3/4")
Use these convenient tools to insert, remove, and adjust fine springs and other small parts in hard to reach places. Made of quality polished tool steel and hardened to withstand high tension without breaking or bending. The fine diamond knurled hand...
A US manufacturer of quality hand tools for those engaged in the repair, rework, R & D, testing, and assembly of electronic components and printed circuit boards from Through Hole to 2Mil Pitch Surface Mount.
Portland, Maine, USA
IPC Certification
IPC - Association Connecting Electronics Industries® offers globally recognized industry-traceable training and certification programs on key Electronics Industry Standards. Blackfox, founded in 1996, is the premier Worldwide Approved IPC T...
PRO-STD-001 Certification
Course for Counterfeit Component Detection and Prevention Blackfox and ProSkill CTG offers a unique and comprehensive course; PRO-STD-001 Certification, a meaningful Course for Counterfeit Component Detection and Prevention. Have your...
Hand Soldering Training
The purpose of these courses is to promote best manufacturing practices and enhance the individual’s job performance. These courses are indispensable for everyone involved in Electronics Manufacturing. Blackfox is widely recognized in the...
Lead-Free Solder Training
Blackfox’s Lead Free Soldering series minimizes the risks of conversion, and gives you the confidence to introduce lead free products and services quickly, with highest quality. The lead free certification program offers the latest requireme...
Blackfox Training Institute, LLC
Blackfox is the industry leader in providing IPC Certifications, Solder Training, Customized Training Programs, and Counterfeit Component Training and Certification.
Longmont, Colorado, USA
Consultant / Service Provider, Manufacturer, Standards Setting / Certification, Training Provider
SELECT PRODUCTS
Selective Soldering Equipment and Solutions for Printed Circuit Board Assembly Nordson SELECT supplies selective soldering systems that are supported by a global service network. Recognized for our innovative products, we o...
MARCH PRODUCTS
Advanced Plasma Cleaning Systems, Solutions and Expertise for Multiple Manufacturing Industries MARCH Products is the global leader in advanced plasma surface treatment for semiconductor and electronic component manufacturi...
ASYMTEK Products
Fluid Dispensing and Conformal Coating Solutions for Diverse Applications and Industries Nordson ASYMTEK supplies fluid dispensing and PCB conformal coating equipment that is supported by a global service network. Recognized for our...
Nordson Electronics Solutions makes reliable electronics an everyday reality. Our ASYMTEK, MARCH, and SELECT brands deliver precision fluid dispensing, conformal coating, plasma treatment and selective soldering equipment.
Carlsbad, USA
ISVI Razor High-Resolution Industrial Cameras, CMOS, 5120x5120, 4.5 pixel size
The RAZOR series cameras incorporate the most popular sensor resolutions with the ultimate in image performance, frame rates and economy. With scalable 1, 2 or 4 output links, RAZOR...
CameraLink High Resolution Industrial Cameras
The CameraLink industrial digital cameras offer high performance in a very small footprint. The advanced 25M color CMOS sensor provides the absolute best image quality at an incredible frame rate of 30 fps! The camera Link Interface ensures High s...
CoaXPress High Resolution Industrial Cameras
The CoaXPress series cameras operate 72fps with ZERO-ROT function at 8bit/10bit CXP-6 4CH It provides advanced technology of vision solution Sensor : 25MP Color & Mono CMOS Sensor (Global & Rolling Shutter)...
ISVI - Industrial Sensor Vision International Corporation
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
Oxford, Connecticut, USA
Samsung Hanwha SME 8mm Electric Feeder for SM481 SM482 Machine
Samsung SME Feeder is used for Samsung SMT pick and place machines, including SM471, SM481, SM482, SM471Plus, SM481Plus, SM482Plus, DECAN S2/F2/L2, EXCEN PRO and so on.. Samsung SME series of original new / original u...
I-Pulse Feeder F1 and PS type Feeder
We support I-Pulse Feeder, F1 and PS type Feeder, If you have interesting, Please feel free to contact us, thanks zoey@jinchensmt.com I-Pulse Feeder F1-82-1005 Feeder LG4-M2A00-00 I-Pulse Feeder F1-84 0402 Feeder...
PCB Magazine Unloader Destacker With LED Three Color Work Indicator
Automatic Unloader & Destacker 1. Mitsubishi PLC control system 2. LED three-color work indicator, man-machine touch screen operation interface. 3. Pass through function. 4. C...
Unloader Automatic Unloader DL-M-TN For PCB Assembly Line
Automatic Double Track Unloader DL-M-TN 1. PLC control system 2. Special aluminum alloy plus sheet metal combination, a better understanding of MAGAZINE operating status. 3. Double entry ra...
Panasonic KME CM402/602 machines feeder, MSF,HT,BM machines feeder
Panasonic KME CM402/602 machines feeder, MSF,HT,BM machines feeder 8mm Tape Feeder KXFW1KS5A00 with sensor 8mm TapeFeeder KXFW1KSBA00 without sensor, 12/16mm Tape Feeder KXFW1KS6A00 with sensor, 24/32mm Tap...
Automatic L PCB Magazine Unloader UL-M-BL With Standard SMEMA Communication Interface
Automatic L Unloader UL-M-BL 1. The main body is made of sheet metal bending welding, Magazine into and out of the use of special aluminum profile. 2. Stable casting platform structure design, improv...
Automatic Clean Lead Free Solder Paste Heater
SMT Production Line Usage Automatic No Clean Lead Free Solder Paste Heater Type: Thawing machine Power Source: Electric Dimension(L*W*H): L500 x W300cm x H230mm Weight: 15KG ...
Compact Design PCB Magazine Unloader , Pcb Destacker Machine UC-460W-BN
Automatic Unloader & Destacker UC-460W-BN 1. Panasonic PLC control system 2. LED three-color work indicator, man-machine touch screen operation interface. 3. Pass through function....
SMT Nozzle Cleaning Drying Machine
Parameters of machine: Size: (L*W*H) 520mm × 450mm× 620mm Power(three phase two wire ) 2P2W,220VAC ,50/60Hz...
YAMAHA JUKI Samsung I-pulse siemens Smt Stick Feeder
We Sell Smt Stick Feeder YAMAHA Stick Feeder JUKI Stick Feeder Samsung Stick Feeder I-pulse Stick Feeder siemens Stick Feeder, If you have interest please contact us,Thanks zoey...
YAMAHA CL/FS/FT/FV/SS Smt Feeder
We Sell YAMAHA CL/FS/FT/FV/SS Smt Machine Feeder,original new,original used and copy new If you have interest please contact us,Thanks sale@jinchensmt.com YAMAHA:FEEDER CL8X2 (0402) PART No:KW1-M1300-00X...
Samsung hanwha SM471 machine
Samsung hanwha SM471 machine Any interest,please ask me zoey@jinchensmt.com...
KXFOE1LXAOO CM402
KXFOE1LXAOO CM402 if you have interested,please contact us. thanks zoey@jinchensmt.com...
4 PITCH PCB Magazine Unloader Humanization Design , Special Aluminum Alloy Mechanism
Full Automatic Unloader 1. Special aluminum alloy mechanism, more clearly understand MAGAZINE operation state. 2. Stable casting platform structure design, improve the stability of the equipment....
Samsung Smt Feeder CP and SM type
We have Samsung CP and SM Machine Smt feeder(original new ,original used and copy ne),If you have interest please contact us,Thanks Samsung CP 8*2mm Feeder Samsung CP 8*4mm Feeder Samsung CP 12mm Feeder...
SMT Solder Paste Mixer
Input voltage 220V Work ability At the same time 1 bottle or 2 bottles of mixed soider paste...
Samsung hanwha SM482 machine
Samsung hanwha SM482 machine Any interest,please ask me zoey@jinchensmt.com...
Samsung hanwha SM481 machine
Samsung hanwha SM481 machine Any interest,please ask me zoey@jinchensmt.com...
Siemens Feeder
We have many Siemens feeder in stocks,Original used,If you have interest,you can contact us,Thanks zoey@jinchensmt.com Skype:zoeysmt Siemens 00141098 3*8 FEEDER Siemens 00141098 3*8 FEEDER Siemens 00141099...
SMT PCB Handling Equipment , Pcb Loader Unloader For Circuit
ML Automatic Unloader Advantage 1. Mitsubishi(Panasonic) PLC control system 2. LED three-color work indicator, man-machine touch screen operation interface. 3. Pa...
Jinchen Electric Technology Co,.Ltd
We are please to introduce ourself- ,who is one of the SMT solution provider for Global customers, we can supply Automatic Insertion machines spare parts, SMT spare parts, (including feeder ,Nozzle,PCB
Dongguan, China
Automatic L type PCBA unloader
Automatic L type PCBA unloader Features ▶Strong, firm and stable design. ▶User friendly 'soft touch' LED membrance control panel or touch screen can be selectdTop & bottom pneumatic clamps to secure...
Intelligent SMD Component Storage System
Intelligent SMD Component Storage System Feature •Management is simple ▶Reduce manpower and improve efficiency ▶System control FIFO, eliminate human interference ▶Visual manage...
Automatic seal detection conveyor
QYSMT / MOREL Automatic seal detection conveyor 1. Control part: button type control, simple and easy to understand:Rack part. 2. The frame is designed and manufactured by the processof full...
Muti blade V cut Cutting Machine ML-750
Board Handling - Pallets, Carriers, Fixtures
Features ●Suitable for high hardness aluminum, copper LED strip PCB. Two PCBAS can be separated at a time (ML-360B). ●Applicable PCB material:Alu...
Hanwha Decan F2 SMT Pick And Place Machine
Hanwha Decan F2 SMT Pick And Place Machine Capable of 01005 components up to 42mm square devices and boasting a component height of 15mm!! Another big leap is the PCB size can be up to 1200mm lo...
Auto Round Blade PCB Cutting V cut Machine ML-505
Auto Round Blade V-cut PCB Routing Machine ML-505 Feature: PLC accurately controls the automatic sub-board, and the docking machine can realize unattended full-automatic sub-board operation. Automa...
Fully automatic Scraper cleaning machine-SMS-220
QYSMT / MOREL Fully automatic Scraper cleaning machine-SMS-220 1. The overall use of SUSU304 stainless steel body, anti-acid and alkali corrosion, durable. 2. It is suitable for scrapers of all automatic sold...
ML-1200 Two-table off-line PCB Router
ML-1200 Two-table off-line PCB Router Features ●High speed CCD visual alignment device. ●Using order mode to realize automatic cutting.Cutting pro...
Fully Automatic 2 Axis PCB Cutting Machine HML-850
Fully Automatic 2 Axis PCB Cutting Machine HML-850 Feature ▶The machine can also meet the needs of horizontal and vertical cutting PCB. In another words, It can cut PCB in X axis and Y axis step by step, output...
Automatic V-Groove PCB Cutting Machine HMF505
Automatic V-Groove PCB Cutting Machine HMF505 Feature 1. The microcontroller control the blade, operation is simple and convenient. 2. Infrared light curtain induction and protection tool doubl...
Buffer Conveyor
Using Lei Sai step control system, precision screw, stable and reliable performance. SMT line body with less NG board can be realized. Can be adjusted according to the height of the specific front and back position machi...
Automatic Loose Radial Lead Cutter 301
Description: LOOSE RADEAL CUTTING MACHINE Voltage: 220V AC 60HZ/50HZ Wt: 30KG Efficiency: 60~100pcs/Min Features: *Used to cut jumper leads of bulk/tube-packaged radial components. *Adopting...
RCM-H1000D Desktop automatic centrifugal mixer-temperature recovery type
RCM-H1000D series Desktop automatic centrifugal mixer-temperature recovery type One.piece use clause H1000D desktop automatic centrifugal mixer is based on current technology and safety standards: GB4793.1-200...
IN-CIRCUIT AND FUNCTIONAL TESTER ICT/FCT PMP-2000/PMP2000L
IN-CIRCUIT AND FUNCTIONAL TESTER ICT/FCT PMP-2000/PMP2000L New feature advantage ▶Two-stage pressure table control, the pressure table cylinder rises to the highest point during debugging, which is convenient for deb...
S-7200 X-Ray Inspection System Machine
Component Counters / SMD Counters
S-7200 X-Ray Inspection System Machine X-ray detection equipment is a very advanced detection technology, which can detect the internal structure and contact surface of objects. X-ray inspection equipment can be used to detect...
Intelligent Component Storage System for smt
Smart Electronic Shelves Fixed electronic shelf instructions ※ Multi-color LED (set according to the actual needs of customers), support multiple sets of work orders at the same time to prepare materials for del...
Automatic PCB inverter / flipper
Automatic PCB inverter / flipper Features ▶User friendly 'soft-touch' LED control membrance control panel. ▶Enclosed design with turn limiter ensures highest level of safety. ▶Top cover can be ope...
Yamaha mechanical feeder calibration Jig
Product Name:Yamaha feeder calibration Jig Product Model : Product Specifications: Application: Used for adjust various brand of SMT machine feeders Power: 220V Condensed Air requirement: 5kg/cm2...
V-Groove PCB Depaneling Machine CY-203
V-Groove PCB Depaneling Machine CY-203 Features ▶The microcontroller control the blade, operation is simple and convenient. ▶Infrared light curtain induction and protection tool double protecti...
DJ-302A Manual SINGLE SIDEBAND COMPOTENT CUTTING MACHINE
DJ-302A Manual SINGLE SIDEBAND COMPOTENT CUTTING MACHINE Features ▶It is used to cut jumper leads of the unilateral taped radial components.(roll-/box-packaged) ▶It has small volume and is easy...
Focusing on the SMT field for more than 15 years, QYSMT has been committed to meeting the needs of customers and partners. Our mission is to provide the best solutions while helping to reduce costs and increase efficiency.
Shenzhen, China
JUKI KE2070L High Speed Chip Shooter SMT Machine
JUKI KE2070L High Speed Chip Shooter SMT Machine Board size M size (330×250mm)...
YAMAHA YG200 Refurbished High Speed SMT Pick And Place Machine
YAMAHA YG200 Refurbished High Speed SMT Pick And Place Machine Applicable PCB L330×W250 mm to L50×W50 mm Through-put...
Semi Auto PCB Solder Paste Printer
Semi Auto PCB Solder Paste Printer Model 500mm 800mm 1200mm 1500mm Direction Left → Right,...
Vitronics MR 933 Lead free Reflow Oven
Vitronics MR 933 Lead free Reflow Oven “DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD” provides overall solutions for SMT equipment and 3C intelligent factories. Professional electron...
DEK Horizon 03iX Automatic SMT Solder Paste Printer
DEK Horizon 03iX Automatic SMT Solder Paste Printer Model Horizon 03iX Operating System Win XP+09sp13 or up PCB support T...
KINGSUN SMT Linking Conveyor
KINGSUN SMT Linking Conveyor Power supply 100-230V AC (customized), single phase Air pressure 4-6 bar Transpo...
KINGSUN Automatic Loader and Unloader
KINGSUN Automatic Loader and Unloader Model 250 330 390 460 PCB loading time Approx 6 seconds...
Panasonic Refurbished CM402-L Modular Super High Speed SMT Machine
Panasonic Refurbished CM402-L Modular Super High Speed SMT Machine PCB dimensions (mm) L 50 x W...
Dongguan Kingsun Automation Technology CO., Ltd
DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD is a company which mainly provide used and new SMT parts, provide repair SMT key parts service,new/used SMT machine trading,SMT consumables and Peripherals equipment,Clean room, ESD..
Dongguan, China
PCB Footprint Expert - Tens of Millions of Parts; 25 CAD Formats!
The PCB Footprint Expert is a powerful CAD library development tool powered by our own proprietary CAD LEAP Technology (Libraries Enhanced with Automated Preferences). It is packed with very powerful advanced library management fe...
BOM Builder Service
Our BOM Builder service is a complimentary part building service that really can shave days off every PCB design! By taking advantage of this anytime (24/7) service, you no longer need to waste time to search online for library data, or wo...
PCB Libraries' "Footprint Expert" suite uses CAD LEAP(tm) Technology to greatly simplify footprint and 3D STEP model creation; it is used by tens of thousands of PCB designers and engineers all over the world.
Peoria, Arizona, USA
Consultant / Service Provider, Media / Publisher / Online Resource, Other
Feeders
We stock and trade in all type of SMT feeders. Fuji · ASM · Yamaha · Panasonic· ·Samsung · Universal· Label Feeders Vibratory Feeders Tray Feeders and Towers Feeders Fuji – Medidas: W08f, W12c, W16c, W24c, W32c, W44c, W56c, W72, W88. Feeder...
ESD Equipment
ESD Equipment For Sale Protect your sensitive PCBs with our wide selection of static control solutions. Reduce risks and costs associated with static electricity. We strive to provide the lowest cost and highest quality ESD accesories and factory s...
We are a global electronics manufacturing Solutions provider ....Our company supplies new and used SMT equipment, spare parts, consumibles, ESD supplies and services to a wide range of EMS companies.
Jalisco, Mexico
Pick and Place Machines
Univeral, FUJI, Mydata, Siemens, Europlacer, Philips, Assembleon, Contact Systems View our inventory online or call us at 978-790-2774...
Stencil Printers
MPM, DEK, EKRA, FUJI Stencil Printers View our inventory online or call us at 978-790-2774...
Air Cooled and Water Cooled Chillers
Affinity, Lytron, Triple Loop Chiller CWA-300, Boc Edwards, Advantage, CSZ, Carrier, Koolant Koolers, Filtrine, Neslab, SMC, Thermal Care, Temptek View our inventory online or call us at 978-790-2774...
PCB Routers and Depanelers
Cencorp, PMJ, Fancort, IPTE View our inventory online or call us at 978-790-2774...
Tyco Press
Tyco Press 3 Tons BMEP-3T, 5 Tons BMEP-5T, 6 Tons MEP-6T, 12 Tons MEP-12T, AEP-12T View our inventory online or call us at 978-790-2774...
AOI PC Board Inspection
Vi Technology, Mirtec, Orbotech, Omron, CR Technology, MVP, Cyberoptics, Photon Dynamics View our inventory online or call us at 978-790-2774...
Reflow Ovens
Heller, BTU, Vitronics, Electrovert Reflow Ovens View our inventory online or call us at 978-790-2774...
PC Board Cleaners and Washes
Aqueous Technologies Batch Cleaners, SCS Ionograph, Aquastorm 100 and 200, Smartsonic, Alpha Metals, Speedline, Electrovert, Technical Devices, Austin American, Unit Design, Westkleen, ECD View our inventory online or call us at 978-790-27...
Environmental Chambers and Ovens
Thermotron, Grieve, Envirotronics, Blue M, Despatch, Test Equity, Tenney, Cincinnati Sub Zero, Espec, CSZ View our inventory online or call us at 978-790-2774...
Rotary Screw Air Compresors
Kaeser, Sullair, Gardner Denver, Atlas Copco, Quincy, Wilkerson and Zeks Air Dryers View our inventory online or call us at 978-790-2774...
Dispensers
Camalot XyflexPro+ FXD 8000 Prodigy, Asymtek Spectrum 910 920, PVA, MRSI View our inventory online or call us at 978-790-2774...
Semiconductor Equipment
Front End and Back End Yaskawa Wafer Robots, Ebara Pumps, Boc Edwards Pumps, Affinity Chillers, ASM, Karl Suss, Agilent, Tencor, EVG, GSI, ESEC, Besi, Kulicke and Soffa, K&S, MRSI, Temptronic &...
A dealer of high quality Used SMT Equipment, Used Plastic Injection Molding Equipment, Used Machine Tools, Used Semiconductor Machinery, and Used Industrial Machinery.
Middleton, Massachusetts, USA
F9005 - Low Cost Flat PCB Holding Tray
Flat PCB holding trays are designed to hold up to 25 PCBs for storage and transport at manual workstations. These trays will hold virtually any PCB size. As with all transport racks, these are made of antistatic material. Specifications:...
FKN Systek K5000 - Multiple Blade Circular Blade PCB Depanelizer
FKN Systek K5000 - Manual board feed PCB multiple panel singulation Singulate panels with up to 10 scorelines. Singulate panels with components up to 2.5" 3 models available: - Output tray...
F9006 - L Shaped Trays 2 Sizes Hold 30 or 25 PCBs
These holding trays are designed to handle more flexible PCBs. Support on two sides prevents printed circuit cards from flexing or moving during transport. Available in two sizes to hold 25 or 30 PCBs. Specifications: S...
FKN Systek K4000 - Motorized Linear-Circular Blade PCB Depanelizer
The FKN Systek K4000 motorized linear blade depanelizer is designed for high volume singulation of scored and skip scored Printed Circuit Boards. No programming necessary. (Switch select operating mode and speed) Sing...
N100 - PCB Nibbler
Singulate Straight Tab Routed Panels Store cut tabs inside tool for discarding at operator convenience Available with 3 blade types and choice of support dies Clean cut - requires no rework...
99-0012 - Pin Grid Array Extractors
Pin Grid Array Extractors are available in two sizes and provide a quick and safe way to extract Pin Grid Array components from their sockets. All component sizes can be accommodated, as the tool is available in two or four grip models. Adjusting...
N200 - Depaneling Punch for Round Tab Routed Boards
Low Cost Punch For Singulation Small Tab Routed Panels N200 singulates one tab at a time with upper and lower pinch blades. Singulate curve routed and odd shaped boards. Top and bottom knif...
F9004 - Side by side PCB transport racks hold up to 100 PCBs
Side by side stackable PCB transport racks for up to 100 printed circuit cards of up to 7.4" (190 mm) deep are made of antistatic material. Side plates can be adjusted from .7" (20mm) to 9.8" (250 mm). Specifications:...
F9051 - Horizontal Stack PCB Transport Cart
The F9051 PCB Transport Cart has 3 shelves of card guides. Each level can hold fifty 11" long PCBs. The card guides are made of conductive material fo safe and convenient handling of PCBs during assembly. Additional shelves c...
C200 Pneumatic Crimp Tool
Cable & Wire Harness Equipment
Low Cost Table Top Crimp Machine. The C 200 is a table top low cost crimp tool which takes a variety of dies from different manufacturers. Air operated using standard factory air (5 bar min), with a pressing capacity of up to 1,200 kp,...
R100 Benchtop PCB Depaneling Router
Safely Singulate Tab Routed Panels - With Dust Extraction Finish routing a tab routed PCB for singulation is a relatively slow process . However, in some cases, where the board contours and sensitive or overhanging components may requi...
FKN Systek K6000 - Multiple Blade Circular Blade PCB Depanelizer
FKN Systek K6000 - Fully automated singulation of up to 10 panels. Singulate Panels with up to 10 Scorelines. Process PCBs with Components up to 2.5" High. Integrated Input and Output Conveyors....
F9055 - Transport Trolley Holds 200 to 400 Panels.
Made of anti electrostatic material, this PCB transport cart is sturdy and durable. The cart is good for moving large quantities of heavy boards. Specifications: Size: ( F9054 = 850x550 x1300 mm) - ( F9055 1200 mm x 550...
FKN Systek S200 Automatic Single Line Depaneling Saw
The FKN Systek S200 is a semiautomatic diamond blade depaneling saw which will cut a populated PCB panel one line at a time. The operator places the panel onto the input tray and positions the cutting line over the blade travel path...
FKN Systek K3000 - Manual Circular-Linear Blade PCB Depanelizer
FKN Systek K3000 - Singulate scored and skip scored panels up to 24" long ESD protective mat on back table Adjustable front and back support table Singulate panels with components up to 2.5" high...
K4000 L36
The K4000L36 is a motorized linear blade depanelizer to singulate V-Scored PCBs. The K4000 is available in versions able to singulate 18", 24" 36" and 48 " panels. The K4000 L18 and...
FKN Systek N115 Nibbler
Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N115 Nibbler from FKN Systek. Two sharp support blades on either side of the tab help cleanly slice the PCBs from the tabs. The bl...
F9002 - Double Faceplug Stackable Racks hold 50 cards.
Double Faceplug Stackable PCB Transport Racks for up to 50 Printed Circuit Cards of up to 12.9" (330 mm) are made of antistatic material. Side plates can be adjusted from 3.2" (80mm) to 9.8" (250 mm). Available with PCB stop rods wh...
F9000 Modular PCB Carrier Magazine
The basic unit for these PCB racks holds 32 boards up to 6.7" (170mm) long. Modules can be assembled side by side to hold longer Printed Circuit Cards. Standard extrusions allow card width of 0 to 10.25". For wider cards, extrusions can...
FKN Systek S100 - Manual Depaneling Saw with Guide Table
The FKN Systek S100 is an economical PCB singulating saw for moderate production volumes and laboratory use. The diamond saw blade with the linear bearing positioning table to guide the PCB to be cut, allows for quick and...
Depanelizer Equipment and Tools For Electronic Assembly. PCB Racks and Trays. Wire Crimp Press and Tooling.
Millis, USA
RMS Automatic Radial Insertion Machine
RMS--Automatic Radial Insertion Machine Product name RMS Theoretical speed...
Refurbished YAMAHA YV100xg Pick and Place Machine
Refurbished YAMAHA YV100xg Pick and Place Machine Machine Type YV100XG Substrate size M type L460 * W335 (MAX)...
KSUN 350S Accordion conveyer
product instruction ※Stable and reliable integrated control system ※Floding down and special air circuit design. lifting speed smoothly ※ Smooth and parallel width adjustment &...
KSUN 350A Destacker / Push-up Stacker
Model No: KSUN 350A Destacker / Push-up Stacker MAX PCB`s capacity: 300pcs (0.6mm thickness PCB) cycling time: Approx 8 seconds Power supply: 100-230V AC (customized), single phase Power l...
Refurbished High Speed JUKI KE2060M Pick and Place Machine
Refurbished High Speed JUKI KE2060M Pick and Place Machine MC Model KE2060 Board size...
KSUN 390 Automatic un Loader
Model No: KSUN 390 Automatic un Loader PCB loading time: Approx 6seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized ), single phase, MAX 300V/A...
KSUN 250 Automatic Sucking Loader
Model No: KSUN 250 Automatic Sucking Loader PCB loading time: Approx 6seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized ), single phas...
KSUN 460 Automatic un Loader
Model No: KSUN Automatic un Loader PCB loading time: Approx 6seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized ), single phase, MAX 300V/A Air...
lead-free meter controls the hot air reflux soldering machine in the eight temperature zone
Type no. K-MA8835 Heating parameters Number of heating zones On 8 August Length of heating zone...
KSUN 330 Automatic loader
Model No: KSUN 330 Automatic loader PCB loading time: Approx 6 seconds Magazine change-over time: Approx 30 seconds Power supply: 100-230V AC (customized ), single phase, MAX...
YAMAHA YG100R HIGH SPEED PICK AND PLACE MACHINE
YAMAHA YG100R HIGH SPEED PICK AND PLACE MACHINE Model YG100RA(FNC TYPE )/YG100RB(SF TYPE) Object substrate...
JUKI RS-1R Next Generation Smart Fast Modular Mounter
JUKI RS-1R Next Generation Smart Fast Modular Mounter Model JUKI RS-1R Pick and Place Machine Conveyor Specification standar...
KSUN 460 Automatic PCB Inverter
product instruction ※ Stable and reliable integrated control system ※ Easy to operate touch screen control interface ※Using cylinder flip, quick, smooth, precise alignment ※Buffer deceleration design more...
Inspection Conveyor (1.2M)
technical parameter: Model 1200 Track length...
Domestic 8DOB LED Multifunctional Placement Machine
Domestic 8DOB LED Multifunctional Placement Machine Features: >Equipped with the nozzle library exchange station, the size of the material can be mounted by a single machine. >Standard pallet material station, braided...
KSUN 350 Automatic mobile conveyor
product instruction ※PLC control system, Working is stably and reliably ※Easy to operate touch screen control interface ※ Fast, stable and accurate stepper motor moves ※Enclosed design ensure the highest securi...
RZS Automatic Radial Insertion Machine
RZS--Automatic Radial Insertion Machine Product name RZS Theoretica...
KS-635 Lead-free Fully Computer-controlled Reflow Oven
KS-635 Lead-free Fully Computer-controlled Reflow Oven Model KS-635 Heating part parameter Number of heating zones ...
Refurbished Yamaha YV100X Pick and Place Machine
Refurbished Yamaha YV100X Pick and Place Machine MC Type YV100X PCB size L460 x W445 mm (Max.), L50 x W50 mm (Min.)or L460 x W335 mm...
KSUN 350T Automatic magazine buffer
product instruction ※ PLC control system, Working is stably and reliably ※ Easy to operate touch screen control interface ※ Memory function, control the order of PCB`s pass in and out...
DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD
DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD is a company which mainly provide used and new SMT parts, provide repair SMT key parts service,new/used SMT machine trading,SMT consumables and Peripherals equipment,Clean room, ESD..
Dongguan, China
Consultant / Service Provider, Distributor, Equipment Dealer / Broker / Auctions, Manufacturer, Manufacturer's Representative
China Oem Factory Durable Auto Smt Pcb Single Magazine unloader Machine with Magazine Rack For Smt Assembly Line
Product introduction: 1.This equipment is used to collect PCBs into magazine at the end of SMT production line 2.Stable and reliable PLC control system; 3.Easy to operate LED touch screen control interface;...
BESTEMP reflow checker 6 channel temperature profiler Reflow soldering temperature tester
BESTEMP reflow checker 6 channel temperature profiler Reflow soldering temperature tester Characteristic: 1..High efficiency, data can be stored up to 16 times continuously, and can be downloard to computer for gro...
SMT Assembly line Connector PCB Lifting Conveyor PCB Manual Lift Gate Conveyors
Description This equipment is used at the junction of the aisle of the production line to play the role of transmission and channel Features 1.Full closed design ensures safety level of ope...
Bestemp x6 Furnace temperature tester
Product introduction : Characteristics of bestemp X6 furnace temperature tester ● high efficiency, continuous storage of data 16 times, while downloading to the computer group analysis and p...
Inline solder recovery system soldering waste recovery machine SMT Solder recycle machine waste extract system
1.Characteristic: 1.Highly effective recycling of the solder waste, up to 93% yield . 2.No need to add any chemicals or reducers to the process uses physical separation to ensure a good quality pro...
Solder Splatter Smelting Recycling Machine electroplate Tin Waste Slag Smelting Recovery Machine
HR-SD100 is an endeavor in reverting and recycling the oxides which occur during working of a Wave Soldering Machine in order to reduce production cost, create a greener environment and assist the quality process. Use special stirring syst...
Loose components foot cut machine Loose and Taped Axial Lead Forming Machine
Name:Semi-automatic capacitor cutting machine Model:SC-104A Voltage :220V AC 60Hz/50Hz 40W Size:L360*W300*H350MM Weight:35kg Efficiency:2500-3000PCS/H (It depends on the worker) Features:...
SMEMA Interface Reject Conveyor Dual lanes SMT PCB NG OK Buffer Conveyor Pcb Assembly line Connector
Description This equipment is used for AOI to separate the good board and the bad board. During the inspection, the good board can continue to run without hindrance Features 1.Reject,inspec...
SMT reflow oven temperature thermometer Bestemp X6i DX60i DX100
PRODUCT INTRODUCTION : Characteristics of bestemp X6 furnace temperature tester ● high efficiency, continuous storage of data 16 times, while downloading to the computer group analysis and processing; ● adopt modular...
Automated optical inspection manufacturers through hole 2d aoi inspection machine equipment smt systems software process
High precision smt aoi offline machine pcba offline aoi 2 conveyor aoi...
Economical and practical type off line selective wave soldering solder welding equipment machine
Economical and practical type offline selective welding equipment Features: 1.The machine integrates flux spraying,preheating and soldering. 2.The solder pot is fixed, and the PCB b...
9 channels PCB temperature profiling SMT thermal profiler online KIC 2000
SLIM KIC 2000 SPECIFICATIONS: KIC 2000 Profiler * 9 Channels Slim Kit KIC 2000 Profiler * 9 Channels * Full Original Package, with original Thermal Couples, Protective...
SMT Auto Aqueous Stencil Cleaning Machine Pneumatic smt Washing equipment High Pressure Cleaner
Field of application: Suitable for steel mes...
Factory Outlet Good Quality Pcb Automatic 90 Degree Turn Conveyor Machine with SMEMA
Description This equipment is used to adjust the running direction of the circuit board on the production line to different paths . Features 1.PLC+LED touch screen control, easy to operate. 2.Full closed design en...
Dip Line Wave Solder outfeed PCB PVC Green Belt Assembly Small Conveyor Table Machine Industrial With Fans
Description This equipment is used for Wave solder outfeed PCB conveyor Features l Speed, the angle of the guide rail, height can be adjusted, flexible. 2. Green belt with hole and anti-skidding belt are optiona...
Automatic Magazine/Stacked PCB Recirculation Loader Smt Magazine Loader and Vacuum Bare Board Loader For Smt Assembly
Description This equipment is used for the automatic loading operation of double-sided PCB boards and PCB light boards on SMT production lines. FEATURES 1.PLC + LED touch screen control,...
KIC 2000 12 channels PCB temperature profiling SMT thermal profiler 12CH reflow oven temperature record analysis in assembled circuit board line
SLIM KIC 2000 SPECIFICATIONS: KIC 2000 Profiler * 9 Channels Slim Kit KIC 2000 Profiler * 9 Channels * Full Original Package, with original Thermal Couples, Protective...
SMT Machine Automatic PCB Destacker PCB Bare Board Loader pcb loading machine
SMT Machine Automatic PCB Destacker PCB Bare Board Loader...
High Capacity PCB Drop Stack Bare Board Smt Unloaders With Ce Certificate For Mobile Phone Factor Production Line
Product introduction: 1.This equipment is used to collect bare PCBs at the end of SMT production line 2.Stable and reliable PLC control system; 3.Easy to ope...
Automatic UV/IR PCB Infrared curing oven for conformal coating machine
General of machine: 1.The in line curing machine (ICM Series) is idea for high volume curing production.They are easy to integate with different Conformal Coating machines. 2.Available in different lengths,they pro...
Shenzhen Honreal Technology Co.,Ltd
Shenzhen Honreal Technology Co., focus on global Surface Mount electronic assembly field for 15 years. Specializing in providing various brands of SMT pick and place machines and spare parts. Fuji, Panasonic, Juki, Hitachi, Yahama
Shenzhen, China
SOS Inventory
SOS Inventory is ideal for small to medium-sized manufacturers in various business sectors, including electronics, food processing, aircraft manufacturing, retail, equipment, building materials and many more. The software allows organizations to i...
Pro Subscription
Our pro subscription includes: Advanced automation Job Costing Customer Portal 5 users included. $20 each additional user. $169.95/month DETAILED FE...
Plus Subscription
Our plus subscription includes: Unlimited locations Serial and lot tracking. Barcoding 3 users included. $20 each additional user. $119.95/month DET...
Companion Subscription
Our companion subscription includes: Sales orders. Assemblies. Best-in-class QuickBooks integration. 2 users included. $20 each additional user. $59.95/month...
SOS Inventory Software provides top-of-the-line inventory control, order management, and manufacturing for a wide variety of industries, plus integration with QBO, UPS, ShipStation, Shopify, BigCommerce, Zapier and PayPal.
Arlington, Texas, USA
SMT Consumables
Featured Items: Single 8mm tape Abrasive Block for Feeder Table Double side tape (8mm) SMT magazine rack Siemens Valve Plunger SP6 DST-8MM-00 (4)spli...
Siemens Spare Parts
Siemens machine feeders and spare parts. Featured items: Siemens feeder module 12/16mm Siemens feeder module 24/32mm Siemens feeder mod. 44mm Siemens f...
SIEMENS/ASM SPARE PART
P/N Description 00047012-01 Cover cap CV-PK-4-B PUR...
SMT Pick and Place Nozzles
High quality SMT nozzles, cutters, filters, etc. Featured Items: Siemens Nozzles Siemens Nozzle Type 911 Siemens Nozzle Type 914 Nozzle Ty...
We offer various kinds of high quality SMT nozzles, feeders, cutters, filters, etc. Sales1@kundasmt.com
Suzhou, China
BAJA Bid was founded to form an auction organization with the primary objective of providing an outstanding experience for both our buyers and sellers.
Odessa, Florida, USA
Resistors
A resistor is a two-terminal electronic component made of resistive material with a certain structural form that can limit the flow of current in a circuit. The resistance value of a resistance element is generally dependent on temperature, material,...
Integrated Circuits (ICs)
An integrated circuit is a circuit with specific functions that integrates a number of common electronic components, such as resistors, capacitors, transistors, etc., and the connections between these components through semiconductor technology. Thro...
Power Supplies - Board Mount
A power supply is a device that converts other forms of energy into electrical energy and supplies electrical energy to a circuit (electronic device). It provides the electrical energy needed by all the components in a computer. The size of power sup...
RF/IF and RFID
A reader, an electrical tag and data management system constitute an integrated RFID system. Radio Frequency Identification (RFID) is also regarded as a type of automatic identification technology. It carries out non-contact bidirectional data commun...
Optoelectronics
Electronic displays refers to information display devices that use electronic technology to transform imperceptible signals into perceptible signals. Their characteristics include small-space occupancy, flexible display format, and simultaneously dis...
Discrete Semiconductor Products
A semiconductor is a material that conducts electricity between a conductor and an insulator at normal atmospheric temperature. Common semiconductor materials contains silicon, germanium, gallium arsenide, etc. Silicon is the most influential in the...
Capacitors
Sandwiched between a layer of non-conductive insulation, two conductors close to each other, which constitutes a capacitor. A capacitor is a component that stores charge, and its storage is called capacity. Capacitors can be generally divided into fi...
Filters
Filter is a filter circuit consisted of capacitance, inductance and resistance. The filter can effectively filter out the frequency points of a specific frequency or frequencies outside the frequency point in the power line, and obtain a power signal...
Memory Cards, Modules
In the integrated circuit, the circuit with storage function without physical form is also known as memory, such as RAM, FIFO, etc.; In the system, the storage device with physical form is also called memory, such as memory stick, TF card, etc. All t...
Crystals and Oscillators
Some electronic devices require AC signals with high frequency stability, while LC oscillators have poor stability and are prone to frequency drift. In the oscillator using a special element - quartz crystal, can produce a highly stable signal, the u...
Sensors, Transducers
A sensor is a device that converts non-electrical quantities (such as temperature, humidity, light, magnetic field, sound, etc.) into electrical signals.Many types of sensors, mainly divided into physical sensors and chemical sensors. The physical...
Connectors, Interconnects
Connectors is a device that connects two active devices to transmit currents or signals. Domestic connectors, known as the connector and socket, generally refers to electrical connectors. Essential performances of connectors and interconnects can be...
Relays
A relay is an electrical control device that can give a specified amount of input and hold it long enough to make a predetermined change in the controlled amount in the electrical output circuit. When the input drops to a certain level and remains fo...
Circuit Protection
Circuit protection is to protect electronic components in the circuit mainly in over voltage, over current, surge, electromagnetic interference. With the development of science and technology, electric/electronic products have been increasingly diver...
Isolators
Isolators are a kind of linear optical coupling isolation principle that output and convert the input signal. The input, output and working power supply are isolated from each other. Isolator, also known as signal isolator, is an significant part of...
Distributor of hot-sales and hard-to-find electronic and electromechanical components and supplies. Online catalogue, data sheets and purchasing. win-source.net
SPOKANE, USA
Gaskets and Seals
Orion Industries Inc has over 35 years experience in the design and manufacture of high performance gaskets and seals. We fabricate parts from open cell sponge, closed cell sponge, and solid, dense gasketing materials. We also manufactur...
Heavy Gauge Electrical Insulation
ORION has emerged as a leader in the fabrication of heavy gauge electrical insulation products. We route many materials such as TW Formex®, Statex®, GE's Lexan®, and acrylics. Their typical thicknesses is between 0.060" and 0.25&...
Waterjet Cutting
Waterjet allows for improved cutting tolerances, improved lead times and the ability to provide highly complex geometry. Using a stream of water with forces of 55,000 PSI yields fast production rates and tool free cutting. Our single hea...
Laser Cutting Services
Our Preco FlexPro CNC laser cutting system provides the speed of galvanometer processing with all the versatility of an XY motion system. Orion has the capability to cut detailed parts more precisely, and with shorter lead-times than conventional...
Formed Plastics Products
Formed parts are used for electrical insulation, such as snap-in-place housings, protection of high voltage parts, or covering bus bars. Plastics Forming Methods: Heated line bending...
Die Cutting, Stamping
Orion has high-speed die cutting presses ranging from 1 to 60 tons. We also have stamping presses that range from 1 to 60 tons. Our other Die cutting capabilities include: Production parts up to 60&qu...
CNC Routed Plastics, Electronic Insulation Products
Through the process of CNC routing, we are able to cut with precision electronic insulation products including thicker gauge materials. We also process composite materials such as G-10, FR4 and other materials that are not easily...
EMI/RFI Shielding Laminates
To shield against emissions, there must be a barrier of an electrical conductive material. Shielding laminates provide an economical and effective solution to this problem. Most of our materials consist of a metal foil (usually, copper o...
Filters and Screens
Orion provides flexible, polyurethane filter foam to remove dust and contaminating particles from the air, gases and liquids in a variety of applications. The open pore skeletal structure provides low air resistance ideal for use in computers, ele...
Thermal Transfer, Thermal Interface Materials
We are well versed in the following thermal application materials: Sil-Pad thermally conductive insulators Gap-Pad thermally conductive gap filling material ...
ORION provides innovative solutions to our customers' EMI/RFI Shielding, Insulating, Screening and Sealing needs in a broad spectrum of manufacturing environments.
Ayer, Massachusetts, USA
used smt and semi machines buy and resell
used smt and THT , Semi machines buy and resell ...
HongCheng import & Export co.,Ltd
Buy and selling used smt,semi, Robot ,CNC and all used machines
Dongguan, China
SRT BGA Rework Station Repair Services
BGA Rework Station Services for: SRT 1000, 1100, 1100HR, 2000 plus , Shuttle Star and Zhuomao Brands. Calibration Profile Set Up Computer Repair, and hard drive replacement. Used machi...
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 17mm x 25mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 17mm x 25mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 29mm x 29mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 29mm x 29mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 48 X 48mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 48mm x 48mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more....
BGA Rework Training & Certification
This course is designed for students that require the hands-on skill and knowledge to reliably remove and install many types of the most complex BGA components. Students are taught methods for safe and reliable BGA component rework using a top of...
BGA Rework Station, Nitrogen Capable, Model E6250U
NEW! Nitrogen Capable for High Yield Lead Free BGA Rework. NEW! Movable top and bottom gas heaters allows for easy rework near the edge and hard to ger area's of large PCB's. For high volume BGA Rework...
BGA Reballing Training
In this One-Day class you will learn successful techniques to re-ball BGA Components. Both Lead and Lead Free Solder Balls will be covered. The student will have an opportunity to use and evaluate some of the most popular BGA rework fi...
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 38mm x 38mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 38mm x 38mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
PCB Rework, PCB Repair Services
On the cutting edge of technology, we offer a full line of high tech services to assist contract manufacturer's and product research and developers. Specializing in quick turn around times to help get your product to market...
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 23 X 23mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 23mm x 23mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more....
ZM-R7850A Nitrogen Capable BGA Rework Station
The Zhuomao ZM-R7850A BGA Rework Station is a top of the line Nitrogen Capable Rework System. Great to help increase yield with Lead Free Solders and a no clean process. Place SMD components from .8mm to 80mm with the high resolu...
Wisdomshow Model WDS-620 SMD & BGA Rework Station
This Model WDS-620 BGA Rework System has a Fixed Position, High Resolution Split-Vision Optical System for Removal, Placement, and Soldering of BGAs, CGA's, CSPs, QFPs, LGA's and Other SMDs. An excellent...
Solder Training and Solder Certification Courses
Solder Training and Solder Certification Courses Taught in Accordance With IPC Soldering Guidelines. We offer a variety of customized courses set up specifically for our customers requirements. An example would be our combination...
IPC-A-610D - Acceptability of Electronic Assemblies - 1 Day Classes
This latest version D of the IPC-A-610 released in Released February 2005, Presented in a one day class this is a must for all quality assurance and assembly departments. IPC-A-610D illustrates industry-accepted workmanship crite...
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 35mm x 35mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 35mm x 35mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
ZM-R720A BGA Rework Station
The Zhuomao ZM-R720A BGA Rework Station. Place SMD components as small as 0.2mm with this high resolution Hot Air Rework System. One of the most precise machines on the market at this affordable price. Call (888) 406-2830 for a...
Selective Soldering Services
Selective soldering of PTH, SMT, BGA and other SMD devices....
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 27mm x 27mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 27mm x 27mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
BGA Nozzles for the SRT, Shuttle Star, and Zhuomao Rework Machines
We carry a large selection of BGA Nozzles for the SRT, Shuttle Star, and Air Vac BGA Rework Machines. We also provide custom designed nozzles for your specific requirements. Prices Range from $100.00 to $450.00 each....
Hot Air BGA Rework Nozzle for the SRT BGA Rework Station 45mm x 45mm
SRT, VJE, VJ Electronics BGA Rework Nozzles 45mm x 45mm Hot Air Nozzle. Fits SRT Sierra Summit, 1000, 1100 , VJ Electronics and more. 1 in stock....
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Oroville, California, USA
Consultant / Service Provider, Equipment Dealer / Broker / Auctions, Manufacturer's Representative, Training Provider
1936 MKV - 蚁酸回流焊炉
甲酸蒸气中无助焊剂的甲酸回流炉 Heller设计并制造了可用于甲酸蒸汽水平式无助焊剂甲酸回流焊炉。这款新烤箱的设计符合Semi S2 / S8安全标准(包括有毒气体)。 已证明甲酸是无助焊剂回流中的有效还原剂 卧式回流炉中的优异结果证明晶圆凸块应用...
1910MK5- 双腔4条轨道SMT 回流焊炉
双轨及双温度回流焊炉 双炉膛模组:双炉膛+双腔吹风马达+双腔加热模组+双腔独立温度测量监测 分岔功能 双炉膛模组 双轨 双导轨和双中央支撑系统...
回流焊炉-Mark 7
适用于高产能的世界一流的SMT 回流焊炉 MK7系列具有多项革命性和突破性的设计。MK7系列结合客户需求,优化DELTA T,减少耗氮量,延长保养间隔时间。汇集各项优化功能的同时降低了机身高度,使视野更开阔。 HELLER欢迎您参观我们的研发中心和制造工厂,亲自在MK7的设备上做PROFILE测试,共同见证MK7系列的强大功能及优势。或者将您的产品寄给我们,我们会将PROFILE 的测试结果与您...
1826MK5 - 适用于高产能的回流焊炉
世界一流的回流焊炉 为高产能需求,最小化保养所需时间及最小占地面积提供稳定的性能 无铅保证 免保养 最低的耗氮与耗电 免费的一体化 CPK 软件 随着最新的技术突破,HE...
1936/2043 Mark 5 – 回流焊系统
以高达1.4米/分钟的高链速为适应极限贴片速度提供了高产能需求解决方案。 无铅保证 免保养 最低的耗氮与耗电 免费的一体化 CPK 软件 1936与2043 MK5系列向人们展现了最高水平的炉温均温再现性。与Mar...
Heller 755在线连续式的垂直烘烤炉
小型化的垂直烘烤炉 Heller提供垂直炉烤箱用以提高生产效率、质量及降低成本的解决方案 在线式垂直炉在固化树酯的制程中有显著的三大领域 减少人员在生产过程中的上料及下料的时间浪费以提高生产效率 减少烤箱在开关门时所产生的温度...
860压力固化烤箱(PCO)
压力固化烤箱(PCO)或高压容器用于使空隙最小化并增加通常用于贴装附着和底部填充应用中的粘合工艺的粘合强度。 PCO将空气加压到刚性容器中,并通过强制对流加热和冷却。 加热器,热交换器和鼓风机位于压力容器内部。 固化过程完成后,压力固化炉会自动将压力降低到1atm并冷却。...
Heller 788在线、连续、垂直炉烤箱
Heller提供垂直炉烤箱用以提高生产效率、质量及降低成本的解决方案 这种升降模式的固化炉利用了垂直空间,适用于固化应用,最多可达4小时的固化时间,而占地仅有96“(2.5m) 的面积。极适用于填充和封装制成。 在线式垂直炉在固化树酯的制程中有显著的三大领域...
1809 MK5-Heller先进联机无气泡/真空回流焊炉
均衡气流技术的无气泡/真空回流焊氮气系统 9个顶部和底部加热区-业内每英尺拥有最高的区域数! 100英寸加热长度-可提供超大产量! 2个内部冷却区-提供最低的出口温度! 总长度为180英寸-优化占地面积! 带有10英寸模块的新型模块设计...
Semi-auto SMT PCB Printing Machine
Semi-auto SMT PCB Printing Machine ❙ Introduce of SMT Stencil Printer...
FUJI High Performance NXT-H Hybrid Chip Mounter
FUJI High Performance NXT-H Hybrid Chip Mounter If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven&a...
Lead Free Reflow Soldering Machine
Lead Free Reflow Soldering Machine...
Best Quality SMT/SMD Reflow Soldering Machine
Best Quality SMT/SMD Reflow Soldering Machine ❙ Introduce of Reflow Soldering Oven...
SMD LED Soldering Machine for SMT Line
SMD LED Soldering Machine for SMT Line ❙ Introduce of Reflow Soldering Oven...
Small SMT Reflow Oven Nitrogen PCB Solder Reflow Oven
Small SMT Reflow Oven Nitrogen PCB Solder Reflow Oven ❙ Introduce of Reflow Soldering Oven...
JUKI FX-3RA Modular SMT Chip Shooter
JUKI FX-3RA Modular SMT Chip Shooter ❙ Introduce of JUKI FX-3RA FX-3RA | SMT-JUKI / surf...
Advanced SMT PCBA Cleaning Machine for Pristine Circuit Assembly
Advanced SMT PCBA Cleaning Machine for Pristine Circuit Assembly ❙ Introduce of PCBA Cleaning Machine Introduc...
SMT Soldering Oven for High Speed PCB Assembly Line
SMT Soldering Oven for High Speed PCB Assembly Line...
Semi Automatic Solder Paste PCB Printing Machine
Semi Automatic Solder Paste PCB Printing Machine ETA high accuracy PCB printing machine, solder paste printer, automatic stencil printer with best quality and service...
Full-auto SMT Stencil Printer I.C.T-P4034
I.C.T-4034 | PCB Printer Solder Paste Support Frameless Stencil Printer PCB Printer Solder Paste Support Frameless Stencil Printer I.C.T Full-auto SMT Stencil Printer is a high precision automatic solder paste printe...
Hot Sale SMT Lead Free Reflow Oven Solder Machine for LED Production Line
Hot Sale SMT Lead Free Reflow Oven Solder Machine for LED Production Line ❙ Introduce of Reflow Soldering Oven...
Reflow Soldering Oven with Best Price
Reflow Soldering Oven with Best Price ❙ Introduce of Reflow Soldering Oven...
High Performance UV Curing Oven Machine U2
High Performance UV Curing Oven Machine If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included all of our...
ASM SIPLACE SX SMT Placement
ASM SIPLACE SX SMT Placement SMD Chip Shooter If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included allof...
PCBA Coating Conveyor
PCBA Coating Conveyor If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included all of our products....
High Reliability Radiator Reflow Soldering Ovens
High Reliability Radiator Reflow Soldering Ovens ❙ Introduce of Reflow Oven&l...
ETA Seal UV Conveyor SC-1000
ETA Seal UV Conveyor SC-1000 If you could not find any similar items you want, you may send some photos to us. because our catalog and website haven't included all of our products....
SMT PCBA Router Machine
SMT PCBA Router Machine ❙ Introduce of SMT PCBA Router Machine High quality PCBA router machine, desktop PCB router, PCB V-cut machine, PCB separator, LED depaneling, for PC...
IR Reflow Machine for PCBA Production Line
IR Reflow Machine for PCBA Production Line ❙ Introduce of Reflow Soldering Oven...
I.C.T ( Dongguan ICT Technology Co., Ltd. )
I.C.T is a manufacturer from China that offers SMT, DIP, PCBA conformal coating equipment and turnkey solution.
Dongguan, China
SuperVision Video Microscope Inspection Station
High resolution inspection and quality control system with true auto-focus that significantly increases productivity by allowing rapid examination of objects at varying magnifications. Manual focus override provides complete control when examining a...
SuperVision Video Microscope Inspection Station
High resolution inspection and quality control system with true auto-focus that significantly increases productivity by allowing rapid examination of objects at varying magnifications. Manual focus override provides complete control when examining a...
Table top video microscope and inspectiojn stations.
St. Louis, Missouri, USA
Backplane Assembly
dataCon has designed and manufactured many of the current backplane technologies such as VME 64X, PCI, and VXI. We can provide substrate procurement (from one of our partner companies or the customer's approved supply base), press fit and solder a...
Original Design Manufacturing
dataCon offers customers a comprehensive and integrated lower total cost of ownership approach to product design and manufacturing services. By fostering a cross corporate, cross functional team environment, the company has helped OEM's to success...
Electromechanical Assembly
dataCon procures to print all sheet metal designs, extruded shapes and stamped or machined parts to be assembled. Upon receipt, parts are stocked or binned by customer part number until requested by work order or shop floor personnel. Screws, nuts...
Circuit Card Assembly (CCA)
dataCon has many years of experience manufacturing CCA's for the military, medical and life sciences industries. We offer solution driven SMT assembly processes and specialize in quick turn, double sided micro BGA assembly or repair. Our CCA...
dataCon designs, manufactures and tests high performance, high reliability, backplanes, circuit card assemblies, chasis assemblies for aerospace, defense and medical markets. dataCon is a total solutions manufacturing services company.
Burlington , Massachusetts, USA
CY-460T Conformal coating machine
Features1. The equipment adopts industrial computer control, windowssa7 operating system,2. Driven by servo motor + ball screw, with automatic precision calibration function, which canautomatically eliminate errors;3. The e...
Shenzhen CY Industry Automation Equipment Co.,Ltd
We're CY Industry located in China focusing on SMT Equipment & Automation machinery. Our current product line can enrich your's capability, also the continuing support & upgrades could be the helping hand you need!
Shenzhen, China
High precision nitrogen reflow oven
1, Windows XP O/S, so simply as Chinese and English interface onscreen alternative available. 2, The digital control system adopted with PLC +Modular circuit to stabilized and accurate of repetitive precision...
Dongguan Yushunli Automation Equipment Co.,Ltd
YUSH Electronic Technology Co.,Ltd was founded in 2004,is located in the world manufacturing city Jiangsu,Guprofessional pcb separator/pcb depanelizer electronic equipment machinery. The company has advanced production and proces
dongguan, China
Manufacturing Services
Surface Mount Technology Services Siemens Siplace SMT Line Philips Topaz Line Philips Comet Line BGA Inspection and Repair Through Hole Assembly DIP Insertion Component seq...
Engineering and Testing Services
Ayrshire Electronics can provide a wide range of engineering services, including but not limited to: Design Services Hardware and Software Development Printed Circuit Board Layout...
Ayrshire Electronics Harrodsburg
Full service EMS provider with 4 locations in US
Harrodsburg, Kentucky, USA
PCB
FR4 PCB Technical Manufacturing Capability: 1, Min. line width/space: 4mil/4mil (0.1mm/0.1mm) 2, Min. hole size: 10mil (0.25mm) 3,&...
Finest PCB Assembly Limited is a One-stop service for all your PCB fabrication full turnkey PCB assemblies Offering the most advanced PCB assembly manufacturing and satisfied services: Full Spec PCBs, Small and batch Quantity
Shenzhen, China