Surface Mount Technology Industry Directory

Surface Mount Technology companies

iNEMI (International Electronics Manufacturing Initiative)

iNEMI is an industry-led consortium focused on identifying and closing technology gaps, which includes the development and integration of the electronics industry supply infrastructure.

The International Electronics Manufacturing Initiative’s mission is to identify and close technology gaps, which includes the development and integration of the electronics industry supply infrastructure. This industry-led consortium is made up of more than 65 manufacturers, suppliers, industry associations and consortia, government agencies and universities. iNEMI roadmaps the needs of the electronics industry, identifies gaps in the technology infrastructure, establishes implementation projects to eliminate these gaps (both business and technical), and stimulates standards activities to speed the introduction of new technologies. The consortium also works with government agencies, universities and other funding agencies to set priorities for future industry needs and R&D initiatives. iNEMI is based in Herndon, Virginia (near Washington, D.C.), with regional offices in Shanghai, China and Limerick, Ireland. For additional information, visit

iNEMI (International Electronics Manufacturing Initiative) Postings
2 technical articles »
Testing Printed Circuit Boards for Creep Corrosion in Flowers of Sulfur Chamber

Jul 16, 2015 | Haley Fu; iNEMI, Prabjit Singh, Levi Campbell, Jing Zhang; IBM Corporation, Wallace Ables; Dell Corporation, Dem Lee, Jeffrey Lee; iST-Integrated Service Technology, Jane Li, Solomon Zhang; Lenovo Limited Corporation, Simon Lee; The Dow Chemical Company.

Qualification of electronic hardware from a corrosion resistance standpoint has traditionally relied on stressing the hardware in a variety of environments. Before the development of tests based on mixed flowing gas (MFG), hardware was typically exposed to temperature-humidity cycling. In the pre-1980s era, component feature sizes were relatively large. Corrosion, while it did occur, did not in general degrade reliability. There were rare instances of the data center environments releasing corrosive gases and corroding hardware. One that got a lot of publicity was the corrosion by sulfur-bearing gases given off by data center carpeting. More often, corrosion was due to corrosive flux residues left on as-manufactured printed circuit boards (PCBs) that led to ion migration induced electrical shorting. Ion migration induced failures also occurred inside the PCBs due to poor laminate quality and moisture trapped in the laminate layers....

PCB Dynamic Coplanarity At Elevated Temperatures

Nov 10, 2011 | John Davignon, Ken Chiavone, Jiahui Pan, James Henzi, David Mendez, Ron Kulterman

With the advent of larger packages and higher densities/pitch the Industry has been concerned with the coplanarity of both the substrate package and the PCB motherboard. The iNEMI PCB Coplanarity WG generated a snapshot in time of the dynamic coplanarity ...

21 news releases »
iNEMI Publishes White Paper Proposing a Methodology to Determine Risk of Counterfeit Use

Jun 07, 2013 | The Counterfeit Components Project of the International Electronics Manufacturing Initiative (iNEMI) today released a whitepaper entitled, "Development of a Methodology to Determine Risk of Counterfeit Use."

iNEMI Webinar Will Share Tools Developed to Assess Risk of Counterfeit Components

May 23, 2013 | The Counterfeit Components Assessment Project of the International Electronics Manufacturing Initiative (iNEMI) will hold two open webinars to help the electronics manufacturing supply chain better manage their risk of counterfeit components.

iNEMI Publishes its Tenth Roadmap

May 14, 2013 | Cloud computing, sustainability & recycling, and the explosive growth of MEMS & sensors are among leading trends

The 2013 iNEMI Roadmap is provided on a USB drive.
iNEMI Survey Asks about Boundary Scan Adoption

Feb 06, 2009 | Input will help the electronics industry improve test implementation and coverage

iNEMI Roadmap Workshop

Apr 23, 2008 | European workshop scheduled for 18 June at IMEC in Leuven, Belgium

iNEMI Schedules Regional Roadmap Workshops

Mar 24, 2008 | North American workshop is May 14

iNEMI Names Grace O�Malley Manager of Operations for Europe

Nov 13, 2007 | Photo available (see note at end of release)

Grace O'Malley, iNEMI Manager of Operations-Europe
Wiley-IEEE Press Publishes iNEMI Lead-Free Book

Nov 02, 2007 | Book provides in-depth information for implementing

iNEMI Previews Highlights of 2007 Roadmap at IPC Printed Circuits Expo, APEX and Designers Summit

Jan 15, 2007 | Forum on lead-free processes and summit on reliability are also planned

iNEMI Organizes Task Group to Address Availability of SnPb BGAs

Nov 08, 2006 | Workshop Scheduled for January 24 in Silicon Valley

11 more news from iNEMI (International Electronics Manufacturing Initiative) »

Contact information

iNEMI (International Electronics Manufacturing Initiative)

2214 Rock Hill Road Suite 110
Herndon, Virginia, 20170-4214

  • Phone 703-834-0330
  • Fax 703-834-2735

Visit iNEMI (International Electronics Manufacturing Initiative) website


Room 1409, CIMIC Tower
800 Shang Cheng Road
Pudong, Shanghai, , 200120, China

  • Phone +86 21 5835 3839


Sandville House, Friarstown, Grange
Kilmallock, Co. Limerick, , , Ireland

  • Phone +353 87-9040-363
Software for SMT

SP700avi inline smt screen printer