Bluetooth Enabled Smart Tweezers LCR- and ESR-meter

Bluetooth Enabled Smart Tweezers LCR- and ESR-meter Description:

Smart Tweezers ST5S-BT Bluetooth enabled LCR- and ESR-meter allows users to instantly record their measurements over a Bluetooth connection with a computer or dedicated app for iOS or Android. 

When connected using the Bluetooth reciever stick (required for use with computer), Smart Tweezers will instantly send all measurement data in a comma separated string of values to the recieving software, such as National Instruments LabView. 

An example of this string: "C1.398nF,R3.461kR,10kHz,0.5,S,,,," This string represents the main impedance values and its type (Capacitor 1.398nF), secondary values and its type (Resistance 3.461kR), test frequency (10kHz), test signal level (0.5), measurement mode (S for Serial), and 4 reserved values.

Depending on the program used to receive the information, it can saved into a database or file for later processing or used for quality control. This is an exceptional feature for situations where all measurements must be recorded. 

The ST5S-BT is based on the Smart Tweezers ST-5S model and features all the same functions and high basic accuracy as the non-Bluetooth devices. The device automatically determines the type of component and best test parameters before measuring with a 0.2% basic accuracy. All measurement results are also displayed on the devices' OLED screen.

Smart Tweezers features include:

• Manual and autoamtic L, C, R, ESR and Z test modes
• Basic accuracy of 0.2% 
• Component sorting with variable tolerance of 1%, 5%, 10% and 20%
• Adjustable test signal levels
• Continuity/Diode/Short testing
• Parasitic offset subtraction
• Extensive menus for customized measurements
• 1 oz. weight
• NIST traceable calibration certificate
• Li-Ion battery and micro-USB charging
• Joystick like navigation of extensive menus and options.

Technical Specifications
Frequency: 0.1, 0.12, 1, 10kHz +/- 0.005%
Test Signal Level: 0.45, 0.9 +/- 5% Vrms
Source Impedance: 62.5Ω/1kΩ/16kΩ +/- 1%

Measurement Range:
Resistance: 0.1 Ohm to 10 Mohms
Capacitance: 0.5 pF to 1 mF
Inductance: 0.5 uH to 1H

Typical Accuracy
Resistance: 0.2%
Capacitance: 0.2%
Inductance: 0.2%

Note: The Bluetooth Receiver stick MUST be used to connect to a computer.