C200 Pneumatic Crimp Tool

Company Information:

Depanelizer Equipment and Tools For Electronic Assembly. PCB Racks and Trays. Wire Crimp Press and Tooling.

Millis, USA

Manufacturer

  • Phone 508 376 2500
  • Fax 508 376 2505

See Systek Website »

Company Postings:

(25) products in the catalog

(16) news releases

C200 Pneumatic Crimp Tool

C200 Pneumatic Crimp Tool

Name:

C200 Pneumatic Crimp Tool

Category:

Cable & Wire Harness Equipment

Offered by:

FKN Systek

View C200 Pneumatic Crimp Tool

   

C200 Pneumatic Crimp Tool Description:

Low Cost Table Top Crimp Machine.

The C 200 is a table top low cost crimp tool which takes a variety of dies from different manufacturers. Air operated using standard factory air (5 bar min), with a pressing capacity of up to 1,200 kp, this portable device allows easy and convenient change of tools and set up for different crimp contacts.

Die Sets are available for open barrels, wire end sleeves or insulated parts. Contacts to be crimped are placed onto a star shaped positioning leaf and rotated into place between the top and bottom crimp die sets. The positioning cross is available in 3 versions, for 6.3, 4.8 and 2.8 mm wide terminals.

For more versatile crimp contact positioning, an optional slide table is available. This allows the operator to place crimp contact and wire into position in front of the crimp dies, and subsequently move the assembly between the two dies for crimping.

Operation of the tool is easy. Simply place the crimp contact onto the positioning star and with the left hand rotate the crimp housing in place between the upper and lower die sets. With the right hand place the wire to be crimped into the housing of the contact and step on the foot pedal.

Set-up for different die sets is quick and convenient. After the correct die set has been fixed in place, the screws on the positioning block are loosened so that exact adjustment to the position of the contact to the correct die slot is set. Once the positioning block has been adjusted, the set screws are tightened and the machine is ready for operation.

Summary:

  • Crimps wire from 2 to 34 AWG.
  • Press in force 1200 kp at 6 bar.
  • Simple Tool Change.
  • Foot pedal actuated.
  • Size: HWD 9x5x9.5" (228x127x 241mm)
  • Weight 28 lbs (13 kg).
  • Power: 100 PSI Factory Air
  • Easily Transportable.

View C200 Pneumatic Crimp Tool

C200 Pneumatic Crimp Tool was added in Dec 2016

C200 Pneumatic Crimp Tool has been viewed 1282 times

20 More Products from FKN Systek :

IPC Training & Certification - Blackfox

One stop service for all SMT and PCB needs