ScanCAD International, Inc.

Global provider of Legacy PCB Re-Engineering Systems & Process Control Tools since 1990.

Consultant / Service Provider, Manufacturer, Other

ScanCAD is a global provider of low-cost, scanner-based systems since 1990 and supplier for the #1-ranked Electronic Work Instruction software since 2009. 

  • * PROCESS MGMT TOOLS: A dynamic blend of Process Control, Work Instruction Software and MES products. 
  • * INSPECTION: Optical 100% inspection of stencils, screens, PCBs, Solder Balls, LTCC/HTCC, Holes & Photo tools. 
  • * PCB FAB & DESIGN: Re-create Gerber, CAD & schematics from existing films/boards with exact form fit & function. 
  • * ASSEMBLY: Off-line generation of SMD, insertion and dispensing program files including component vision libraries. 

ScanCAD International, Inc. Postings

11 products »

Precision Material Removal System (PMRS)

WHAT IS THE PRECISION MATERIAL REMOVAL SYSTEM™ (PMRS)?  The Precision Material Removal System (PMRS) is a multi-faceted system designed to be effectively used in three different applications:  1/ Conformal coating removal...

Cleaning Equipment

Precision Material Removal System (PMRS)

ScanINSPECT AMI - Automatic Mark Inspection Station

ScanINSPECT AMI (Automatic Mark Inspection) identifies the "skip" marks that designate defective PCB boards in a panel. AMI provides a simple and user-friendly alternative to time-consuming manual checking methods or expensive, high-e...

Inspection

ScanINSPECT AMI - Automatic Mark Inspection Station

ScanINSPECT ADI - Automatic Dispense Inspection Station

When integrated in the production line, provides 100% verification of absence and presence of glue dot dispensing before entering the placement. ScanINSPECT ADI provides 100% verification of absence/presence of glue dot dispensing...

Inspection

ScanINSPECT ADI - Automatic Dispense Inspection Station

ScanINSPECT SPI - Solder Paste Inspection Station

ScanINSPECT SPI provides a simple and user-friendly alternative to inaccurate and time-consuming manual inspection methods or expensive, high-end AOI systems. ScanINSPECT SPI uses a simple Windows user interface integrated with an au...

Inspection

ScanINSPECT SPI - Solder Paste Inspection Station

ProWorks - Electronic Work Instruction Software

A NEW PARADIGM:  ELECTRONIC WORK INSTRUCTIONS Isnt'it time that current manufacturing processes were reinvented?   ProWorks, simply put, is a revolution in...

Software

ProWorks - Electronic Work Instruction Software

ScanFAB PCB Reverse Engineering Software

Linking Existing Design to CAD & Production. ScanFAB is a flatbed scanner-based re-engineering system that has the capability of scanning PCB's, film, stencils, drawings, etc., to produce all the necessary data to re-manufa...

Software

ScanFAB PCB Reverse Engineering Software

ScanINSPECT BGA Inspection System

ScanINSPECT BGA provides a fast, simple and user-friendly alternative to inaccurate and time-consuming manual inspection methods or expensive, yet slow, measurement systems. ScanINSPECT BGA uses an intuitive process flow interface...

Inspection

ScanINSPECT BGA Inspection System

ScanSTENCIL Automatic Screen and Stencil Inspection Workstation

Inspection and Data Creation Tool for the Stencil / Screen Fabrication Industry. World's leading solder paste stencil & emulsion screen inspection system. Used by both stencil/screen fabricators and users to detect errors B...

Inspection

ScanSTENCIL Automatic Screen and Stencil Inspection Workstation

ScanCOMPONENT PC-based Offline Component Programming System

The ScanCOMPONENT Product helps in creating vision files for your placement machines. It is its own standalone product or a module within the ScanINSPECT VPI product. ScanCOMPONENT is a PC-based offline component programming syste...

Software

ScanCOMPONENT PC-based Offline Component Programming System

ScanINSPECT VPI - Virtual Products Inspection Station

ScanINSPECT VPI is a fully integrated, stand-alone process control, measurement and inspection and programming workstation for use in process setup and new product introduction in the PCB or Hybrid Microcircuit assembly industries. S...

Inspection

ScanINSPECT VPI  - Virtual Products Inspection Station

See all products from ScanCAD International, Inc. »

1 technical article »

Embracing a New Paradigm: Electronic Work Instructions (EWI)

Mar 15, 2019 | Jeffrey Rupert, Travis Loving

While there have been quite dramatic and evident improvements in almost every facet of manufacturing over the last several decades owing to the advent and mass adoption of computer automation and networking, there is one aspect of production that remains stubbornly unaffected. Massive databases track everything from orders, to inventory, to personnel. CAD systems allow for interactive and dynamic 3D rendering and testing, digital troubleshooting, and simulation and analysis prior to mass production. Yet, with all of this computational power and all of this networking capability, one element of production has remained thoroughly and firmly planted in the past. Nearly all manufacturing or assembly procedures are created, deployed, and stored using methodologies derived from a set of assumptions that ceased to be relevant fifty years ago. This set of assumptions, referred to below as the “Paper Paradigm” has been, and continues as the dominant paradigm for manufacturing procedures to this day. It is time for a new paradigm, one that accounts for the vastly different technological landscape of this era, one that provides a simple, efficient interface, deep traceability, and dynamic response to rapidly changing economic forces.

This paper seeks to present an alternative. Instead of enhancing and improving on systems that became irrelevant with the invention of a database, instead of propping up an outdated, outmoded and inefficient system with incremental improvements; rewrite the paradigm. Change the underlying assertions to more accurately reflect our current technological capability. Instead of relying on evolutionary improvements, it is time for a revolution in manufacturing instructions....

1 news release »

ScanCAD - ECT Strategic Partnership Announced

Oct 16, 2009 | Everett Charles Technologies, (ECT), a Dover Company and a leader in the development of advanced technology board test products, announced that ECT has finalized a strategic partnership with ScanCAD International of Littleton, CO, USA, a global supplier of process management tools. This partnership provides for ScanCAD International to exclusively distribute and support the ProWorks process management work instruction software family of products globally within the electronics industry.

Software for SMT

Sell Your Used SMT & Test Equipment