Standard : up 8 down 8 air furnace, patented hot air management system to make hot air convection more efficient heat capture faster;
Dimension (L * W * H) 4800*1280*1420
Number of heating zones Up / Down 8
Number of cooling zones Up 2
Emission requirements 10m3 /min*2( ...
|
Reflow |
RMS--Automatic Radial Insertion Machine
Product name
RMS
Theoretical speed
2
|
Other |
KINGSUN Inspection Connection Conveyor
※ Steel frame, static painted surface.
※ Balance weight design improve the stability.
※ Optional pass/inspection working mode.
※ Smooth and parallel width adjustment (lead screw).
※ According t...
|
Board Handling - Conveyors |
Product name: KE - 2070 JUKI high-speed chipmounter
Product number: KE - 2070
Products in detail
Features:
Suitable for high speed SMT chip placementmachine of small components. Not only the element corresponding to a wide rangeof laser recognition,
a...
|
Pick & Place |
Type no.
K-MA8835
Heating parameters
Number of heating zones
On 8 August
Length of heating zone
2850mm
Heating m...
|
Reflow |
Type no : K-MC8835
Heating parameters
Number of heating zones:On 8 August
Length of heating zone:2850mm
Heating mode:Hot air
Number of cooling zones :1
Send some parameters
Mesh belt width ...
|
Reflow |
Technical parameter:
Model
1200
Printing area
1250
|
Printing |
KSUN R05 JUKI Feeder Calibration
It is essential for this equipment that enhanced productivity , installation and quality improvement
As the high efficiency vision camera is asked in order to investigate precisely and repair the error of device position which results from the modi...
|
Pick & Place |
technical parameter:
Model
1200
Track length
1200mm
|
Board Handling - Conveyors |
Model No:KSUN350 Automatic 90 degrees Turning Machine
Cycle time:Approx 15seconds
Power supply:100-230V AC (customized), single phase
Power load:Max 300V/A
Air pressure: 4-6 bar
Air volume:MAX 20L/minute
Transport height:900±...
|
Board Handling - Conveyors |
Model No: KSUN 330H Automatic Dual track un loader
PCB loading time: Approx 6seconds
Magazine change-over time: Approx 30 seconds
Power supply: 100-230V AC (customized ), single phase, MAX 300V/A
Air pressure: 4-6 bar, MAX 10L/minute
<...
|
Inspection |
Model No: KSUN 460A Destacker / Push-up Stacker
MAX PCB`s capacity: 300pcs (0.6mm thickness PCB)
cycling time: Approx 8 seconds
Power supply: 100-230V AC (customized), single phase
Power load: MAX 150 VA
Air pressure: 4-...
|
Board Handling - Conveyors |
Model No: KSUN 250H Automatic Dual track un loader
PCB loading time: Approx 6seconds
Magazine change-over time: Approx 30 seconds
Power supply: 100-230V AC (customized ), single phase, MAX 300V/A
Air pressure: 4-6 bar, MAX 10L/minute
<...
|
Board Handling - Conveyors |
Model: DH-800 Robot Automatic Dispenser
product model: DH-800D
Dispensing range: 300/300/90
maximum load Y/Z: 10KG/6KG
|
Soldering Robots |
product instruction
※ PLC control system, Working is stably and reliably
※ Easy to operate touch screen control interface
※ Memory function, control the order of
PCB`s pass in and out
※ Fast, smooth, accurate retrieval position...
|
Board Handling - Conveyors |
product instruction
※ PLC control system, Working is stably and reliably
※ Easy to operate touch screen control interface
※FIFO(first in first out), LIFO(last in first out) and
pass through function optional
※ Fast, smooth, accurate ...
|
Board Handling - Conveyors |
product instruction
※ PLC control system, Working is stably and reliably
※ Easy to operate touch screen control interface
※ Memory function, control the order of
PCB`s pass in and out
※ Fast, smooth, accurate retrieval position...
|
Board Handling - Conveyors |
product instruction
※ PLC control system, Working is stably and reliably
※ Easy to operate touch screen control interface
※FIFO(first in first out), LIFO(last in first out) and
pass through function optional
※ Fast, smooth, accurate ...
|
Board Handling - Conveyors |
product instruction
※Stable and reliable integrated control system
※Floding down and special air circuit design.
lifting speed smoothly
※ Smooth and parallel width adjustment
(lead screw)
※ SMEMA port...
|
Board Handling - Conveyors |
product instruction
※ Easy to operate touch screen control interface
※Telescopic structure, width adjustable, easy to walk
※ Photoelectric sensors with protection, more secure
※ Smooth and parallel width adjustment (lead screw)
※SMEMA p...
|
Board Handling - Conveyors |
product instruction
※Stable and reliable integrated control system
※Floding down and special air circuit design.
lifting speed smoothly
※ Smooth and parallel width adjustment
(lead screw)
※ SMEMA port...
|
Board Handling - Conveyors |
product instruction
※ Easy to operate touch screen control interface
※Telescopic structure, width adjustable, easy to walk
※ Photoelectric sensors with protection, more secure
※ Smooth and parallel width adjustment (lead screw)
※SMEMA p...
|
Board Handling - Conveyors |
product instruction
※ Stable and reliable integrated control system
※ Easy to operate touch screen control interface
※Using cylinder flip, quick, smooth, precise alignment
※Buffer deceleration design more stable, accurate
※ optional pass work...
|
Board Handling - Conveyors |
product instruction
※ PLC control system, Working is stably and reliably
※ Enclosed design ensure the highest security level
※Balanced, stable, accurate rotation mode
※Easy to operate touch screen control interface
※ Smooth and parallel width...
|
Board Handling - Conveyors |
product instruction
※ Stable and reliable integrated control system
※ Easy to operate touch screen control interface
※Using cylinder flip, quick, smooth, precise alignment
※Buffer deceleration design more stable, accurate
※ optional pass work...
|
Board Handling - Conveyors |
product instruction
※PLC control system, Working is stably and reliably
※Easy to operate touch screen control interface
※ Fast, stable and accurate stepper motor moves
※Enclosed design ensure the highest security level
※Customized machine length accord...
|
Board Handling - Conveyors |
product instruction
※PLC control system, Working is stably and reliably
※Easy to operate touch screen control interface
※ Fast, stable and accurate stepper motor moves
※Enclosed design ensure the highest security level
※Customized machine length accord...
|
Board Handling - Conveyors |
product instruction
※ Stable and reliable integrated control system
※ Easy to operate touch LED buttons or touch
screen control interface
※Machine always fault monitoring
※ optional pass working mode
※ Smooth a...
|
Board Handling - Conveyors |
product instruction
※ Stable and reliable integrated control system
※ Easy to operate touch LED buttons or touch
screen control interface
※Machine always fault monitoring
※ optional pass working mode
※ Smooth a...
|
Board Handling - Conveyors |
product instruction
※PLC control system, Working is stably and reliably
※Easy to operate touch screen control interface
※the pneumatic clamps of top and bottom three
point provided for the magazine alignment
※Electric pushing board design...
|
Board Handling - Conveyors |
product instruction
※PLC control system, Working is stably and reliably
※Easy to operate touch screen control interface
※the pneumatic clamps of top and bottom three
point provided for the magazine alignment
※Electric pushing board design...
|
Board Handling - Conveyors |
product instruction
※PLC control system, Working is stably and reliably
※Easy to operate touch screen control interface
※the pneumatic clamps of top and bottom three
point provided for the magazine alignment
※Electric pushing board design...
|
Board Handling - Conveyors |
Model No: KSUN 460L Automatic Single Magazine Un loader
PCB loading time: Approx 6seconds
Magazine change-over time: Approx 30 seconds
Power supply: 100-230V AC (customized ), single phase, MAX 300V/A
Air pressure: 4-6 bar, MAX 10L/minute
|
Board Handling - Conveyors |
Model No: KSUN 390L Automatic Single Magazine Un loader
PCB loading time: Approx 6seconds
Magazine change-over time: Approx 30 seconds
Power supply: 100-230V AC (customized ), single phase, MAX 300V/A
Air pressure: 4-6 bar, MAX 10L/minute
<...
|
Board Handling - Conveyors |
Model No: KSUN 330L Automatic Single Magazine Un loader
PCB loading time: Approx 6seconds
Magazine change-over time: Approx 30 seconds
Power supply: 100-230V AC (customized ), single phase, MAX 300V/A
Air pressure: 4-6 bar, MAX 10L/minute
<...
|
Board Handling - Conveyors |
Model No: KUSN 250L Automatic Single Magazine Un loader
PCB loading time: Approx 6seconds
Magazine change-over time: Approx 30 seconds
Power supply: 100-230V AC (customized ), single phase, MAX 300V/A
Air pressure: 4-6 bar, MAX 10L/minute
|
Board Handling - Conveyors |
Model No: KSUN Automatic un Loader
PCB loading time: Approx 6seconds
Magazine change-over time: Approx 30 seconds
Power supply: 100-230V AC (customized ), single phase, MAX 300V/A
Air pressure: 4-6 bar, MAX 10L/minute
Tr...
|
Board Handling - Conveyors |
Model No: KSUN 390 Automatic un Loader
PCB loading time: Approx 6seconds
Magazine change-over time: Approx 30 seconds
Power supply: 100-230V AC (customized ), single phase, MAX 300V/A
Air pressure: 4-6 bar, MAX 10L/minute
<...
|
Board Handling - Conveyors |
Model No: KSUN 330 Automatic un Loader
PCB loading time: Approx 6seconds
Magazine change-over time: Approx 30 seconds
Power supply: 100-230V AC (customized ), single phase, MAX 300V/A
Air pressure: 4-6 bar, MAX 10L/minute
Transport ...
|
Board Handling - Conveyors |
Model No: KSUN 250 Automatic un Loader
PCB loading time: Approx 6seconds
Magazine change-over time: Approx 30 seconds
Power supply: 100-230V AC (customized ), single phase, MAX 300V/A
Air pressure: 4-6 bar, MAX 10L/minute
Tran...
|
Board Handling - Conveyors |
Model No: KSUN 460 Screening Conveyor
Power supply: 100-230V AC (customized), single phase
Power load: MAX 100V/A
Transport direction: Left to right/right to left(optional)
Transport height: 900±20mm (or customized)
PCB thickness...
|
Board Handling - Conveyors |
Model No: GKSUN 350 Screening Conveyor
Power supply: 100-230V AC (customized), single phase
Power load: MAX 100V/A
Transport direction: Left to right/right to left(optional)
Transport height: 900±20mm (or customized)
PCB thicknes...
|
Board Handling - Conveyors |
Model No: KSUN 460F Cooling Conveyor
Power supply: 100-230V AC (customized), single phase
Power load: MAX 100V/A
Transport direction: Left to right/right to left(optional)
Transport height: 900±20mm (or customized)
PCB thickness:...
|
Board Handling - Conveyors |
Model No: KSUN 350H Dual Track Conveyor
Power supply: 100-230V AC (customized), single phase
Power load: MAX 100V/A
Transport direction: Left to right/right to left(optional)
Transport height: 900±20mm (or customized)
PCB th...
|
Board Handling - Conveyors |
Model No: KSUN 350A Destacker / Push-up Stacker
MAX PCB`s capacity: 300pcs (0.6mm thickness PCB)
cycling time: Approx 8 seconds
Power supply: 100-230V AC (customized), single phase
Power load: MAX 150 VA
Air pressure: 4-...
|
Board Handling - Conveyors |
Model No: KSUN 250H Dual Track Conveyor
Power supply: 100-230V AC (customized), single phase
Power load: MAX 100V/A
Transport direction: Left to right/right to left(optional)
Transport height: 900±20mm (or customized)
PCB th...
|
Board Handling - Conveyors |
Model No: KSUN460 Inspection Connection Stand
Power supply: 100-230V AC (customized), single phase
Power load: MAX 100V/A
Transport height: 900±20mm (or customized)
Transport direction: Left to right/right to left(optional)
PCB t...
|
Board Handling - Conveyors |
Model No: KSUN 350 Inspection Connection Stand
Power supply: 100-230V AC (customized), single phase
Power load: MAX 100V/A
Transport height: 900±20mm (or customized)
Transport direction: Left to right/right to left(optional)
<...
|
Board Handling - Conveyors |
Model No: KSUN 460 Automatic vacuum loader
MAX PCB`s capacity: 300pcs (0.6mm thickness PCB)
cycling time: Approx 6 seconds
Power supply: 100-230V AC (customized), single phase
Power load: MAX 180 VA
Air pressure: 4-...
|
Board Handling - Conveyors |
Model No: KSUN B350 Automatic vacuum loader
MAX PCB`s capacity: 300pcs (0.6mm thickness PCB)
cycling time: Approx 6 seconds
Power supply: 100-230V AC (customized), single phase
Power load: MAX 180 VA
Air pres...
|
Board Handling - Conveyors |