PACE Worldwide Products

SMT Products and Services offered by PACE Worldwide


PACE Worldwide

A recognized developer of solutions for the assembly & repair of highly advanced electronics. PACE provides products/training for the soldering, rework & repair of pcb's, specializing in BGA rework, desoldering & fume extraction. »»

PACE Worldwide website
  • Browse:

20 listed by PACE Worldwide

Product

Category

PACE TF 1800 BGA and SMD System for Production Rework

Inductive-Convection Heating Technology Provides Ultimate Thermal Performance Conventional resistance coil heating technology has been successfully used in convective rework stations for decades to install and remove a variety of BGA, QFN, CSP, CGA, PoP,...

PACE TF 1800 BGA and SMD System for Production Rework

Rework & Repair Equipment

PACE IR 3000 Infrared BGA/SMT Rework System

Production BGA Installation & Rework WITHOUT the Expensive Nozzles! The IR 3000 is the most advanced BGA rework system available on the market today. It can easily install and remove BGA, QFN, µBGA/CSP, Flip Chip and other SMD's. Featuring ...

PACE IR 3000 Infrared BGA/SMT Rework System

Rework & Repair Equipment

PACE ST 925 SMT Rework System

Low-Cost Convective and Infrared System for SMT Rework The ST 925 combines three popular PACE products together into one convenient, low-cost SMT Rework System. The system is comprised of the ST 325 Programmable Convective/Hot Air Rework Station, the PH 100 Low Profile Infrar...

PACE ST 925 SMT Rework System

Rework & Repair Equipment

PACE IR 1000 Infrared BGA & SMT Rework Station

Infrared BGA & SMT Rework at a Price that Can't Be Beat! The IR 1000 is a low-cost, remarkably flexible and effective rework system, capable of installing and removing passives, QFP's, SOIC's, PLCC's, MLF's, LCCC's, TSOP's, QFN's and BGA...

PACE IR 1000 Infrared BGA & SMT Rework Station

Rework & Repair Equipment

PH 100 Low Profile Infrared PCB Preheater

Rapid, Safe Soldering or Desoldering on High Mass, Heat-Sinking Assemblies Do you repair thick multilayer printed circuit boards that are connected to metal ground planes? Avionics modules that are designed to dissipate heat? Heat-sinking pcb's and BTC (QFN's) utilizing lead-f...

PH 100 Low Profile Infrared PCB Preheater

Rework & Repair Equipment

MBT 350 Multi-Channel Solder, Desolder & Rework System

Soldering, Desoldering & Rework of Through-Hole/Surface Mount PCB's PACE's MBT 350 is a self contained, 3 channel rework station that offers high capacity, low temperature SMT/Thru-Hole soldering, desoldering and repair. The unit features ...

MBT 350 Multi-Channel Solder, Desolder & Rework System

Rework & Repair Equipment

MBT 301 Soldering & Desoldering Station with TD-100 & SX-100

Soldering, Desoldering, Rework & Repair of Through-Hole/Surface Mount PCB's PACE's MBT 301 is a self contained, 2 channel rework station that offers high capacity, low temperature SMT/Thru-Hole soldering, desoldering and repair. The unit features 2 individ...

MBT 301 Soldering & Desoldering Station with TD-100 & SX-100

Soldering - Other

PACE ST 325 Digital, Programmable Hot Air Reflow System

Convective SMT Rework System is Fully Programmable The ST 325 is a digital, self-contained system that is fully programmable and can be used to remove or install surface mount components when individual or multiple operations are to be run. From the front panel, the system can be used...

PACE ST 325 Digital, Programmable Hot Air Reflow System

Rework & Repair Equipment

PACE WJS 100 High Power Soldering Station with TD-100 Iron

Maximum Power Output for High Thermal Mass PCBs Do you repair thick multi-layer printed circuit boards that are connected to metal ground planes? Avionics modules that are designed to dissipate heat? Heat-sinking pcb's utilizing lead-free alloys that seem to require a blow-torch t...

PACE WJS 100 High Power Soldering Station with TD-100 Iron

Soldering - Other

PACE ST 50 Digital Soldering Station with TD-100 Tip-Heater Cartridge Iron

PACE's ST 50 features simplified interface with digital display and soft buttons, just push the arrow keys up or down to change temperature from 500-850°F (260-454°C) Programmable Production Soldering Station The most popular of PACE's sing...

PACE ST 50 Digital Soldering Station with TD-100 Tip-Heater Cartridge Iron

Soldering - Other

PACE ST 115 Digital Desoldering Station with SX-100 Sodr-X-Tractor

ST 115 Digital Desoldering Station with SX-100 Sodr-X-Tractor          

PACE ST 115 Digital Desoldering Station with SX-100 Sodr-X-Tractor

Rework & Repair Equipment

ST 70 Power Module Controlled Soldering Station

No knobs, displays or programming ... just plug in a Power Module, turn it on, and it works! Power Modules Precisely Control Temperature! The ST 70 is a single channel system that comes equipped with the TD-100 Tip-Heater Cartridge Soldering Iron,...

ST 70 Power Module Controlled Soldering Station

Soldering - Other

PACE ST 75 Analog Desoldering Station

There are no complicated controls to worry about with PACE's ST 75 ... just turn a dial to the temperature you need and you're ready to desolder! Self-Contained, Expandable Desoldering Station The ST 75 is a completely self-contain...

PACE ST 75 Analog Desoldering Station

Rework & Repair Equipment

ST 65 Air Operated Production Desoldering System with SX-100

There are no complicated controls to worry about with PACE's ST 65 ... just turn a dial to the temperature you need and you're ready to desolder! Low Cost Production Desoldering Station The ST 65 Desoldering Station was designed fo...

ST 65 Air Operated Production Desoldering System with SX-100

Rework & Repair Equipment

PACE PRC 2000 SMT/Through-Hole System for Miniature/Microminiature Repair

Legendary Military Workhorse with Proven Reliability, Longevity & Durability Utilized at all major US and International Military depots, you'll find the PRC 2000 at shipboard repair shops, mobile maintenance vans and thousands of intermediate maintenance facilities worldwide. ...

PACE PRC 2000 SMT/Through-Hole System for Miniature/Microminiature Repair

Rework & Repair Equipment

Cir-Kit Circuitry Repair Kit, Master Version, Non-ThermoBond

A Simple, Low Cost Solution to Damaged Circuitry PACE Cir-Kit Circuitry Repair Kits are a simple, low cost solution to damaged, lifted or missing circuitry on pc boards, allowing fast repair and modification per IPC 7721. Non-ThermoBond Cir-Kits are available in 3 different Models (Ba...

Cir-Kit Circuitry Repair Kit, Master Version, Non-ThermoBond

Rework & Repair Equipment

Cir-Kit Circuitry Repair Kit, Advanced Version (Non-ThermoBond)

A Simple, Low Cost Solution to Damaged Circuitry PACE Cir-Kit Circuitry Repair Kits are a simple, low cost solution to damaged, lifted or missing circuitry on pc boards, allowing fast repair and modification per IPC 7721. Non-ThermoBond Cir-Kits are available in 3 different Models (Ba...

Cir-Kit Circuitry Repair Kit, Advanced Version (Non-ThermoBond)

Rework & Repair Equipment

Cir-Kit Circuitry Repair Kit, Basic Version (Non-ThermoBond)

A Simple, Low Cost Solution to Damaged Circuitry PACE Cir-Kit Circuitry Repair Kits are a simple, low cost solution to damaged, lifted or missing circuitry on pc boards, allowing fast repair and modification per IPC 7721. Non-ThermoBond Cir-Kits are available in 3 different Models (Ba...

Cir-Kit Circuitry Repair Kit, Basic Version (Non-ThermoBond)

Rework & Repair Equipment

PACE SMR Multi-Function Pulse-Heat Rework Station

Compact, Stand-Alone Pulse-Heat Pulse Heat System The SMR features a Pulse Heat power output which provides controlled temperature ramp-up to reflow temperatures, reducing thermal shock risk and unwanted heating of adjacent solder joints.  The system can be used for the remo...

PACE SMR Multi-Function Pulse-Heat Rework Station

Cable & Wire Harness Equipment

TF 2700 BGA Rework System

PACE's ThermoFlo Systems (TF 1700 & TF 2700) are the next generation in automated, cost effective solutions for area array package rework. No other systems on the market have the advanced features found on these systems or is easier to use, ensuring operator acceptance and success! Design...

TF 2700 BGA Rework System

Rework & Repair Equipment

Next generation soldering station - Metcal

Manufacturing Software