The K4000L36 is a motorized linear blade depanelizer to singulate V-Scored PCBs. The K4000 is available in versions able to singulate 18", 24" 36" and 48 " panels.
The K4000 L18 and K4000 L24 are available with optiona...
|
Depaneling |
Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N115 Nibbler from FKN Systek. Two sharp support blades on either side of the tab help cleanly slice the PCBs from the tabs. The blades are mounted on adjustable slide clamps which ...
|
Depaneling |
FKN Systek K3000 - Singulate scored and skip scored panels up to 24" long
ESD protective mat on back table
Adjustable front and back support table
Singulate panels with components up to 2.5" high
Available in 18" blade (standard) or 24...
|
Depaneling |
The FKN Systek K4000 motorized linear blade depanelizer is designed for high volume singulation of scored and skip scored Printed Circuit Boards.
No programming necessary. (Switch select operating mode and speed)
Singulate panels with components up to 2.5"
...
|
Depaneling |
FKN Systek K5000 - Manual board feed PCB multiple panel singulation
Singulate panels with up to 10 scorelines.
Singulate panels with components up to 2.5"
3 models available:
- Output tray
- Straight output conveyor
- Rig...
|
Depaneling |
FKN Systek K6000 - Fully automated singulation of up to 10 panels.
Singulate Panels with up to 10 Scorelines.
Process PCBs with Components up to 2.5" High.
Integrated Input and Output Conveyors.
Output Conveyor with Loaded Board Detector.
...
|
Depaneling |
FKN Systek K7000 - Compact PCB Singulator for Close Component Spacing
K7000 Singulates panels with components up to .030" apart.
Blades Made of Long Lasting High Speed Steel.
Linear Blade 12" (305mm) long.
Front and Back adju...
|
Depaneling |
The FKN Systek S100 is an economical PCB singulating saw for moderate production volumes and laboratory use.
The diamond saw blade with the linear bearing positioning table to guide the PCB to be cut, allows for quick and clean singulation of PCB panels in low volume appl...
|
Depaneling |
The FKN Systek S200 is a semiautomatic diamond blade depaneling saw which will cut a populated PCB panel one line at a time.
The operator places the panel onto the input tray and positions the cutting line over the blade travel path. Pushing the start switch will turn the saw on, a...
|
Depaneling |
Cut panels without scoreline and with overhanging components.
The S300 diamond blade depaneling saw is ideal for use in singulating assembled PCBs.
Singulate panels up to 12" wide.
Microprocessor controlled
STI safety inter...
|
Depaneling |
Safely Singulate Tab Routed Panels - With Dust Extraction
Finish routing a tab routed PCB for singulation is a relatively slow process . However, in some cases, where the board contours and sensitive or overhanging components may require, this may be the most effective way&n...
|
Depaneling |
Singulate Straight Tab Routed Panels
Store cut tabs inside tool for discarding at operator convenience
Available with 3 blade types and choice of support dies
Clean cut - requires no rework for deburring PCB edges
Easy blade chan...
|
Depaneling |
Low Cost Punch For Singulation Small Tab Routed Panels
N200 singulates one tab at a time with upper and lower pinch blades.
Singulate curve routed and odd shaped boards.
Top and bottom knife set cuts tabs cleanly.
Minimal stress...
|
Depaneling |
For faster singulation of odd shaped tab routed panels we have developed the N400. This machine uses national brand Die sets with FKN custom tooling to singulate one panel at a time, or to singulate an entire matrix in one operation
The N Series Pneumatic Punch for tab routed p...
|
Depaneling |