Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


PFMEA and SPC/Cpk program

Views: 1873

TR

#40114

PFMEA and SPC/Cpk program | 2 March, 2006

We had a customer asking PFMEA and SPC/Cpk program. Our company did not have those in our system. Any help is appreciated.

reply »

#40122

PFMEA and SPC/Cpk program | 2 March, 2006

do u mean program as in software? Minitab can do all the basic statistical analysis for your data and give you Cp, Cpk Values. The Cp and Cpk values are derived from estimates from the data (hence necessary to have Confidence Intervals).

Regards, Amol

reply »


RDR

#40124

PFMEA and SPC/Cpk program | 2 March, 2006

in addition to Amols comments I also like Minitab. For FMEA Ford motor Company has a great FMEA program

reply »

#40128

PFMEA and SPC/Cpk program | 2 March, 2006

Is this a new customer or an old one? That's quite a lot to ask if you're not accustomed to performing those analyses.

reply »

Brian

#40254

PFMEA and SPC/Cpk program | 7 March, 2006

Air Academy Associates has a nice SPC package that has the PFMEA calculations built in to it. It also does Cp/Cpk/regression analysis, MSA, et al.You can combine it with a reaally user friendly DOE software for about $250. Both use Excel.

Brian

reply »

Solder Paste Inspection

SMT Equipment Online Auctions