Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


HOW TO GET CADD CENTROID DATA

Views: 2392

alphaman

#39586

HOW TO GET CADD CENTROID DATA | 8 February, 2006

I am with a low volume hi mix CM. We have always taught our pick & place manually on the machine. We now have a newer auto programming machine but for many reasons (not uncommon for CM's) I do not have access to the original cadd data to get the cadd centroid data required. Does anyone know of a way to get this from gerber data, board fab house or any other source?

Thanks

reply »

bobpan

#39587

HOW TO GET CADD CENTROID DATA | 8 February, 2006

#39603

HOW TO GET CADD CENTROID DATA | 10 February, 2006

Centroids from the Gerber data * Graphicode GC-Place graphicode.com * Downstream Technologies CAM350 downstreamtech.com * Gerbcam Tecnomatix-Unicam unicam.com * Circuit Cam aiscorp.com * GerbTool GerbTool.com

reply »

Programmer

#39811

HOW TO GET CADD CENTROID DATA | 20 February, 2006

I usually send it to smtervice@comcast.net

They do it for me about $ 25 per program

reply »

Manufacturing Software

Boundary Scan