Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Voids in Au finished Cu in Pb-free laser soldering

Views: 815

#39539

Voids in Au finished Cu in Pb-free laser soldering | 6 February, 2006

Hi, We are electrodepositing Au(0.25 to 0.5 microns) on Cu & using solder ball bonding process via laser.We are getting lots of voids within the solder (not kirkendall voids). Can anyone shed some light on this problem.We are not using any flux.Presence of moisture is also doubtful.

reply »

FPC* - Fluid Pressure Control - Dispensing Pump

Reflow Oven