Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Are there small pick & place machines for low volume?

Views: 1341

Rick

#39453

Are there small pick & place machines for low volume? | 1 February, 2006

I need to place one type of part (0.080x0.017x0.010 inches) on a flat wire with an accuracy of about +/-0.010 in any direction. Volumes to be about 500 to 1000 per day. Are there any relatively small pick and place machines available?

reply »


RDR

#39455

Are there small pick & place machines for low volume? | 1 February, 2006

A small assembler with a pair of tweezers maybe? just kidding. There is some table top placement equipment available but I can't remember who or what. Try a Google search for SMT placemnt

reply »


RDR

#39456

Are there small pick & place machines for low volume? | 1 February, 2006

i remember now, try Essemtec and/or APS and see if they have what your looking for

reply »

Chunks

#39461

Are there small pick & place machines for low volume? | 1 February, 2006

Used Mydata's are out there.

reply »

#39465

Are there small pick & place machines for low volume? | 1 February, 2006

Hi,

Why dont you attent Apex show. Upcoming in California. Most of Equipment Makers will be there with their top Service guys and Sale Preps. They will do all the answers for you. Good luck and Have Fun in California.

reply »

Nick Haviland

#39538

Are there small pick & place machines for low volume? | 6 February, 2006

Hi--contact us by email at-----eamexco@sbcglobal.net We may be able to help.

reply »

PCB equipment

SMT Machines