Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


juki comments

Views: 2192

#38818

juki comments | 4 January, 2006

Just want to hear what comments might be said about newer 2000 series Juki Placement equipment? Good, Bad, indifferent!

reply »

Steve

#38837

juki comments | 5 January, 2006

We are currently runing a JUKI 750 and 760 as well as a 2060. I can't say enough good things about the quality of the machines and service from JUKI. I've had zero downtime in the last 2 years due to mechanical breakdown and our machines run 18 hours per day. A year and a half ago we cut a Po to JUKI for a 2060 with matrix tray changer and it was installed and building full production within 6 business days. Very impressive.

reply »

#38838

juki comments | 5 January, 2006

thanks

reply »

#38839

juki comments | 5 January, 2006

I wonder if you have any experience with mating 760 to 730. What about suport for 700 series? You have 760 still running good.How many years they have to service machines after purchase. Is the 2060 significantly better than 760 regardless capacity? Do you know anyone selling GOOD 760 ?

Mike Gipos

reply »

John S.

#38840

juki comments | 5 January, 2006

Cannot speak to the 760, but we've been running 3 750's for seven years now. Never needed to call a service technician in. Juki is our benchmark for customer service. We run approximately 20 hrs per day 5 days a week. John S.

reply »

#38849

juki comments | 5 January, 2006

John, Outstanding.Thank you for very much. We are on the right road!

Mike Gipos

reply »

SMT Custom Nozzles

McDry Ultra-Low Humidity Storage Cabinets