Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Board take off on Heller

Views: 1594

Larry

#38738

Board take off on Heller | 29 December, 2005

We have a Heller 1500W Reflow oven and need a way to catch boards as they come out of the oven. Does anyone have a suggestion as to how to do this. Your reply will be appreciated.

reply »

JOE

#38743

Board take off on Heller | 30 December, 2005

magazine unloader, flat belt conveyor, or a box with some foam inside of it.

reply »

KEN

#38755

Board take off on Heller | 1 January, 2006

....does a down pillow count?

reply »


URL

#38765

Board take off on Heller | 3 January, 2006

We have a conveyor then a FIFO in the middle and a conveyor and a Mag loader at the end. If your oven doesn't have SMEMA (like ours) then you need to the conveyor before each. We trick these conveyors by shorting out the in coming SMEMA so they constantly run. That way they will accept the board, then use their exit SMEMA to transfer the board properly into the FIFO or Mag loader.

reply »

Reflow Oven

PCB Soldering Tools