Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


QuadAlign Error 99

Views: 1285


QL

#38723

QuadAlign Error 99 | 29 December, 2005

We've run into a persistent QA error 99 on one of our Quad IVC's. Have checked upon all the obvious and found no bad components.

Do appreciate any advice on this problem.

Thanks.

reply »

bobpan

#38724

QuadAlign Error 99 | 29 December, 2005

Dont quote me on this because its been a while but i believe thats a grounding issue on the quad-align card itself. The card is located in the rear right bottom of the machine. Try adding a ground wire to the cage that the card is mounted inside. Also make sure the cables that are routed off of the EPCU card dont go under the card and next to the muffin fans....you should move them to over top of the board (the error can be noise enduced also).

Good luck.

reply »


QL

#38725

QuadAlign Error 99 | 29 December, 2005

Thanks for your advice.

reply »

SMT Custom Nozzles

Panasonic OEM Solutions