Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


BGA rework with SRT-FPD

Views: 1018

#37488

BGA rework with SRT-FPD | 1 November, 2005

Hi, I am looking for opinion about possibility to do BGA rework with SRT-FPD? This early model (before 2000) is equiped with "Variable Perimeter Heater" (VPH). For BGA rework, SRT introduced later "Summit" models with removable nozzles. I am wondering is it possible to do large BGA (25x25mm, 676 balls) rework with SRT-FPD (additional external temperature sensors must be added for sure)? Any opinion would be greatly appreciated. Best regards, MK

reply »

#37492

BGA rework with SRT-FPD | 1 November, 2005

No can do. FPD was designed for leaded components. Nozzles and head not for BGA. No retrofit avbl either.

reply »

#37516

BGA rework with SRT-FPD | 1 November, 2005

Thanks Pete. MK

reply »

vacuum tweezers - manual pcb assembly

pcb components X-ray inspection