Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


LF Board identification

Views: 986

Amol

#37453

LF Board identification | 31 October, 2005

what methods are being used by folks in the industry for identifing LF ckt boards on the factory floor. I have a list of methods that an be used (like diff solder maks color, LF bar codes, LF logos and so on) but would appreicate your inputs on the suitability/ease of use/ pitfalls of any method and so on.

thanks, Amol

reply »

#37460

LF Board identification | 31 October, 2005

Amol

#37463

LF Board identification | 31 October, 2005

thank you steve, a follow up question....Is anyone following the JEDEC standards for labelling the LF boards as such?? if so, what are your thoughts?

reply »

Tom B

#37569

LF Board identification | 2 November, 2005

I implemented a different color mask for Identification Also using the JEDEC JESD97 and IPC-1066 label designation for our Assemblies.

Tom

reply »

Heller Industries Mark 5获得了 2015年中国SMT远见奖 - 回焊炉领域

Reflow Oven