Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Matrix Trays

#4518

Matrix Trays | 4 April, 2000

ISO a source for Matrix Trays

For plcc20, plcc28, plcc44, etc

thanks

Mike c

reply »

M. Vina

#4519

Re: Matrix Trays | 5 April, 2000

Mike,

I believe these are two possible sources:

Peak (408) 934-2480 Eco-Tel (408) 524-7100

M. Vina

reply »

Ioan

#4520

Re: Matrix Trays | 5 April, 2000

Mike,

are you sure the PLCCs come in trays?

reply »

#4521

Re: Matrix Trays | 6 April, 2000

As Ioan says,These components usually come in tubes rather than trays. I can understand why you might want to do this because I have one very low volume but complicated board that has seven programmable PLCCs that I just don't have room for on the machine. I constructed a custom 7 X 15 tray that the machine recognizes as 7 individual 1 X 15 trays to place these items. For whatever reason you might want to try this you might contact Practical Components at 714/899-8309 www.practicalcomponents.com. They market a line of adjustable matrix trays that might fit your need. good luck John Thorup

reply »

#4522

Re: Matrix Trays | 6 April, 2000

BTW... a PLCC44 fits nicely in a TQFP 14x14MM (80 pin) tray.

reply »

SMT Custom Nozzles

table top X-ray inspection