Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


JOT conveyor Service Technician, anyone know someone?

Views: 1403

Joe

#35966

JOT conveyor Service Technician, anyone know someone? | 8 August, 2005

I need a knowledgable technician to do a l-r r-l change over on a jot buffer. we can either send the machines to you, or we will be willing to fly you down and cover expenses. if anyone knows someone please send me their phone number, and email.

reply »

#35970

JOT conveyor Service Technician, anyone know someone? | 8 August, 2005

Call Tom Gizzi at Recon in N.C. He's real good on JOT's and he works real cheap. 704-488-1722

reply »


PFI

#35972

JOT conveyor Service Technician, anyone know someone? | 8 August, 2005

I wish that was true... Tom originally quoted me 500$ to do the switch over 2 weeks ago. Now i call him and he has changed the price to 1250$ each. and i bought the units from him so you would think things would work out differently.

reply »

bobpan

#35976

JOT conveyor Service Technician, anyone know someone? | 8 August, 2005

why not just try to move the sensors and re-wire the motor to run the opposite direction......i wouldnt think thats toooooo difficult?????

reply »

dougs

#35989

JOT conveyor Service Technician, anyone know someone? | 9 August, 2005

can you just turn the buffer round, the control panel might be at the other side but thats not a big deal is it.

reply »


PFI

#36014

JOT conveyor Service Technician, anyone know someone? | 9 August, 2005

Are you certian you can just turn the machine around?

reply »

#36020

JOT conveyor Service Technician, anyone know someone? | 9 August, 2005

I do not know JOT conveyors but I do know other manufacturers. Based on that I do not believe this alone will work: -fixed rail on wrong side probably -sensors for board control in wrong location -smema ports may be to far from where they need to connect.

reply »

#36021

JOT conveyor Service Technician, anyone know someone? | 9 August, 2005

Is there a need for a professional conveyor swapper? Could I start my own business and make enough money doing something like this? I haven't worked on this conveyor but I'm sure I could figure it out.

As it was said previous it's probably only a couple board detect sensors and the motor direction. If any manuals came with the machine there is probably something on a schematic or drawing that shows what the differences are.

reply »

#36022

JOT conveyor Service Technician, anyone know someone? | 9 August, 2005

Tom at Recon provided him instructions on how to do the change over. Shouldn't be too difficult if you already know what to do.

reply »

FPC* - Fluid Pressure Control - Dispensing Pump