Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


pcb physical handling

#34043

pcb physical handling | 3 May, 2005

Can someone provide me with articles dealing with proper physical handling of PCB's? I am looking for something that can be used as a formal document to be used in training and/or used on the production floor. Thanks

reply »


RDR

#34044

pcb physical handling | 3 May, 2005

IPC 610

reply »

#34067

pcb physical handling | 4 May, 2005

Here's the index for A-610D: http://www.ipc.org/TOC/IPC-A-610D.pdf

reply »

#34070

pcb physical handling | 4 May, 2005

Handling a PCB 1. Check your ESD slippers and ESD Strap first before entering the SMT production line 2. A PCB manufactred over 90 days must be stored first on the baking Oven before Production 3. Temperature on the Baking oven must be 125plus and minus 5 degree C 4. If a PCB is in the Baking Oven The Minimum hours for it to be stored there is 2 and the Maximum is 4. 5. The PCB must be reflowed in 48 hours upon opening the Bag Otherwise The PCB must be stored again in the Baking Oven.

---------- Quality first Then Quantity ------------------

reply »

StikNPeel™ Rework Stencils

bga rework stations