Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


PANASONIC RMA Nozzles breakage

Jeff

#1629

PANASONIC RMA Nozzles breakage | 10 March, 2000

We have nozzles breakage troubleshooting since we uses the PANASONIC RMA nozzle on our MV2x Chip-shooter. Our nozzles are breaked in its opening, and cause components damages.

Also, if anyone with experience in nozzles breakage with PANASONIC RMA Nozzles can lead me away from their knownledges I would appreciate that as well.

Tahnks in advance, Jeff.

reply »

Jeff Wilson

#1630

Re: PANASONIC RMA Nozzles breakage | 12 March, 2000

Jeff, The problem you are describing MAY be related to the push up pin setting on your component feeder units. Please verify that the push up pin height is set correctly for the feeder units, and the nozzle pick-up and placement heights are to the correct specification. Should you need further assistance please call 1-800-308-0891. We would be happy to assist you in any way possible.

Thanks, Jeff Wilson

reply »

Jeff

#1631

Re: PANASONIC RMA Nozzles breakage | 13 March, 2000

Jeff,

We do not use push up pin. The nozzle pick-up and placement heights are checked many times. We are looking for wich component can break the nozzles.

Thanks for your help, Jeff.

reply »

Ben

#5711

Re: PANASONIC RMA Nozzles breakage | 22 March, 2001

i guess you have already checked this by now, but is your line sensor(thickness)operating correctly. This could account for nozzle breakage on placement

reply »

SMT Custom Nozzles

SMT Machines china