Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Siemens SP-120 w/o line computer?

#33833

Siemens SP-120 w/o line computer? | 21 April, 2005

I have a Siemens SP-120 and an HS-180 available. Can the SP-120 be used without a line computer installed?

Possibly using the HS-180 computer?

We are looking to use the machine for short production runs and prototying.

Thanks in advance for any help!

Fred Smith - IMService

reply »

Gene

#33847

Siemens SP-120 w/o line computer? | 22 April, 2005

Unfortunately the answer is no. These machines could not be run without line computer because the station computer does not have a program control software, it has the hardware station control only. Computers for SP-120 and HS -180 are the same but have different software installed

This message was posted Add this forum to your site! Click to learn more. the Electronics Forum @

reply »

Loco

#33861

Siemens SP-120 w/o line computer? | 22 April, 2005

Actually Fred we are using one computer for both machines as we also have an SP-120 and HS-180 . And no you cannot use the machine without line computer

reply »

steve sennett

#34236

Siemens SP-120 w/o line computer? | 13 May, 2005

I have a line computer for a sp120 hs180 line

reply »

Jason Robotham - Tekmart

#34273

Siemens SP-120 w/o line computer? | 16 May, 2005

please send me details, pricing on the sp-120/hs-180 line controller you have for sale

thanks, jason@tekmart.com

reply »

#34275

Siemens SP-120 w/o line computer? | 16 May, 2005

Hi Steve,

Is it for sale?

Please contact me if it is.

Fred Smith - IMService

reply »

tomczyk

#34462

Siemens SP-120 w/o line computer? | 25 May, 2005

I have Siemens Sp-120 and there is HD deffect. Is there any way to start this line computer? Help!

reply »

steve sennett

#34463

Siemens SP-120 w/o line computer? | 25 May, 2005

Fred, Yes it is along with a host of other parts for 180's and 120's including a vision system heads station comp.line comp. and cameras. you can reach me at ssennett@primus-tech.com

reply »

Stefan

#34659

Siemens SP-120 w/o line computer? | 31 May, 2005

Sorry, I haven't checked the forum for quite some time. HS and SP require a line computer. The computer in the machine is the same computer than the line computer out of the HP 300 serie. HP discontinued manufacturing these computers in 1996. The 332 computer had a seperate floppy drive and you can boot the machine software from the floppy drive. Once the software is booted, you could remove the floppy drive and boot another machine. The line computer software requires a harddrive. The 362 computer has an integrated harddrive of 60 Mb. All these HP computer use a SCSI bus, otherwise the harddrive may be compatible with any other SCSI drive. Formatting a harddrive of 60 Mb (yes, these are Mega not Giga) takes an hour. I've never attempted to format any larger harddrive. More questions: http://www.steering-inc.com

reply »

SMT Custom Nozzles

StikNPeel™ Rework Stencils