Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


0201 Land Pattern and Aperture Shape Design

KT

#33114

0201 Land Pattern and Aperture Shape Design | 9 March, 2005

Greetings: I would like to know the common land patterns and aperture shapes that are currently in use. We are doing some research on the same. Please respond to the thread if you have a success story with you current design.

Thanks KT

reply »

py (france)

#33126

0201 Land Pattern and Aperture Shape Design | 10 March, 2005

#33130

0201 Land Pattern and Aperture Shape Design | 10 March, 2005

From http://www.IPC.org ... IPC-7351 - Generic Requirements for Surface Mount Land Pattern and Design Standard The successor to the IPC-SM-782A is here! The document covers land pattern design for all types of passive and active components, including resistors, capacitors, MELFs, SSOPs, TSSOPs, QFPs, BGAs, QFNs and SONs. The standard provides many brand new features, including an intelligent land pattern naming convention, zero component rotations for CAD systems, and a set of three separate land pattern geometries for each component that allows the user to select a land pattern based on desired component density. Also includes updates to existing sections addressing land pattern guidelines for wave or reflow soldering, via location guidelines, fiducials and courtyard boundaries. IPC-7351 includes both the standard and a IPC-7351 land pattern viewer on CD-ROM. 92 Pages. Released February 2005.

reply »

KT

#33139

0201 Land Pattern and Aperture Shape Design | 10 March, 2005

Thanks for the info. Appreciate it.

This message was posted Add this forum to your site! Click to learn more. the Electronics Forum @

reply »

Training Services

Reflow Oven