Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Fuji Flexa


aj

#32416

Fuji Flexa | 2 February, 2005

Hi,

We are considering/hoping to upgrade from MCS to Fuji Flexa. Obviously the latter is the way to go but could any current users advise pro's and con's and capabilities on Fuji Flexa.

Cheers,

Alan

reply »

#32419

Fuji Flexa | 2 February, 2005

Hi AJ,

I've never used the Flexa due to the price. We replaced our MCS with eSMT Software (web site http://www.esmt-software.com/). You might want to look at this if you don't need all of the Flexa features.

We have older Fuji equipment (GSP's CP-II's, IP-I, and IP-II) so this works for us. They don't cover all of the Fuji equipment yet.

I'm not saying it is in the same category but if you don't need all that Flexa offers this could save you a bundle. You need to balance the line yourself but it does optimise well

reply »

SMT Custom Nozzles

BGA Rework Services