Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Through Hole Machines

SLVito

#32224

Through Hole Machines | 24 January, 2005

Morning All,

I have to choice between two axial through hole machines: Panasert AVK 3 and Universal VCD Sequencer 8. I will insert axial components with 0,45 mm to 0,8 mm component lead diameter and perform jumper wire insertion in the same machine. What is the best choice? Could someone help me?

Thanks!

reply »

JAMES

#32280

Through Hole Machines | 26 January, 2005

Universal Sequencer is just a part to tape machine. You will need an inserter inline. But we have a Universal and it works great

reply »

#32337

Through Hole Machines | 31 January, 2005

> Morning All, > > I have to choice between two > axial through hole machines: Panasert AVK 3 and > Universal VCD Sequencer 8. I will insert axial > components with 0,45 mm to 0,8 mm component lead > diameter and perform jumper wire insertion in the > same machine. What is the best choice? Could > someone help me? > > Thanks!

Hi1

If you are looking for quality better you go for Panasert AVK3 but if speed is your focus go for Universal.

Thank you

reply »

#32519

Through Hole Machines | 9 February, 2005

We've got two Universal 6360 series VCD/Sequencers, much older than the VCD 8s out there now. They work AWESOME, provided everybody knows what they are doing. They are not difficult to operate or maintain. When everything's set up right, these things FLY.

reply »

SMT Machines

PCB equipment