Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Super Mole Gold Batter charger lost, please help!!!

Hayden

#30615

Super Mole Gold Batter charger lost, please help!!! | 20 September, 2004

Hi folks, I currently use the supermole gold to do all my SMT relfow profiles. However, I've lost the charger for the supermole battery pack. If someone also use this tool and have their charger handly, would you please look at your charger and give me the spec on it. How many volts, amps, etc. Your help would be much appreciated. I have a feeling I can buy this directly off the shelf instead of shelling out $95 for this charger directly from the manufacturer.

HL

reply »

Peter Barton

#30642

Super Mole Gold Batter charger lost, please help!!! | 22 September, 2004

FYI

Label on the back of my charger says the following:

Pt. No. WD23D200KCN PSU E31-0900-21

Input 230 V AC Output 9V DC, 0.2A 1.8VA

Ours is of course United Kingdom type, even if the mains plug is European and requires an adaptor.

Not too sure about the connection socket to the battery though. It may be special to type. Other leads on ECD equipment are. (PC to Mole interface cable for example).

reply »

#30646

Super Mole Gold Batter charger lost, please help!!! | 22 September, 2004

IN: 120VAC 60Hz 5W Out: 9VDC 150mA

reply »

Hayden

#30649

Super Mole Gold Batter charger lost, please help!!! | 22 September, 2004

Thank you for the help

reply »

Tarheel

#30672

Super Mole Gold Batter charger lost, please help!!! | 23 September, 2004

Ours says

Model: WD1D200KCN Input: 120 VAC 60HZ Output: 9VDC 200mA Class 2 Transformer

Power Supply E31-0900-25 Electronic Control Design, Inc. Milwalkie, Oregon USA

reply »

SMT Equipment Online Auctions

Real-time PCB X-ray Inspection System