Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Machine Optimization Software

#30090

Machine Optimization Software | 17 August, 2004

Hi-

Our company is looking into purchasing some optimization software that will be used for equipment changeover applications....specifically to reduce changeover times. Can anyone share some good and bad experiences out there and/or suggest some vendors to look at? Thanks...

reply »

#30136

Machine Optimization Software | 19 August, 2004

The best way to reduce change-over time is to: * Buy lots of feeders * Limit the number of part numbers available to design engineers * Bar code feeders to help verify proper machine setup

We know of no such software. There IS software that recommends feeder location [eg CircuitCAM, UniCAM, UniCAM varients, etc] , but generally, it is aimed at reducing run time, not setup time.

reply »

Stefan Witte

#30145

Machine Optimization Software | 20 August, 2004

Check with http://www.diplan.de if this meets your requirement.

reply »

Optel

#30813

Machine Optimization Software | 1 October, 2004

The only software designed to minimize number of setups and setup changeover time: http://www.optelco.com

reply »

#31945

Machine Optimization Software | 8 January, 2005

You can try our software, www.asprosoft.ca we are currently testing it and we open for public to test, we plan to release some time around march, perfect time for you to try it and don't invest a lot.

we do

Feeder Arrangement Feeder arrangement problem concerns assigning components to the feeder slots

Placement Sequence Placement sequencing (or insertion order) problem concerns determining the sequence in which the components are printed on the board

Nozzle assignment Nozzle assignment problem concerns the tool changes for the placement head

Component retrieval Component retrieval problem concerns determining from which feeder slop the component is retrieved if it has been assigned to more than one slop.

if you are interested you can contact me directly rodion@asprosoft.ca I take care of all public relations and I manage testing and release process.

reply »

Manufacturing Software

reflow oven profiler