Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


Foam Fluxer

Cal

#30076

Foam Fluxer | 17 August, 2004

Hello All- I need to replace my Foam flux aerator in my wave soldering machine and need a source.

The "Stone" Size is 38x25mm @ 3um. If any one has a source thanks in advance.

OBTW- this wave not a "Name Brand" machine (i.e. Eltrovert).

Cal

reply »

#30082

Foam Fluxer | 17 August, 2004

Try TND Service out of NH 603-437-4755 We are in no way affiliated with this company. My Disclaimer

reply »

#30087

Foam Fluxer | 17 August, 2004

Here's an old thread from the archives that has some info on fluxer stones: http://www.smtnet.com//forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=5780&#Message22853

Also, DaveF recently posted this info: Tim: We haven't bought a stone in years, but we'd start with our wave solder equipment manufacturer. Then, we'd try: * Metallic Resources, Inc.; 2116 Enterprise Parkway; Twinsburg, OH 44087; (330) 425-3155 (fax) (330) 425-2180; Stanley Rothschild, President * Wenesco, Inc.; 3990 W. Barry Avenue, Chicago, Illinois, 60618; (773) 286-8400 (800) 233-4430 FAX: (773) 286-9940

Good luck, Mike F

reply »

3D SPI

Reflow Ovens thermal process improvement