Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


IP3 Feeder for large cap.

#27502

IP3 Feeder for large cap. | 5 March, 2004

I have an Electrolytic capacitor which is 17mm in diameter and is 16.7mm in height. It is presented in a reel,44mm x 24mm. I want to know if there is a suitable feeder available to place this part onto a Fuji IP3.

Thanks,

Alan.

reply »

john

#27618

IP3 Feeder for large cap. | 11 March, 2004

Hi Allan You need a feeder 44 from Hover-Davis.

reply »

D. Sanders

#27700

IP3 Feeder for large cap. | 22 March, 2004

Alan,

Fuji also has a standard motor feeder FMB-44 that should handle this component (believe the depth is right at 17mm for the feeder). This is the motorized feeder, not the old mechanical ones that they use to sell.

D.

reply »


lmq

#27735

IP3 Feeder for large cap. | 24 March, 2004

Contact Lean Stream in San Jose California, ask for Bob Jones at 408-605-0141 for best solution. He has new feeder at extremely low cost that work out best for me. Long Pham

reply »

SMT Custom Nozzles

PCB Soldering Tools