Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


SMT problems

Roberto Rodriguez

#27498

SMT problems | 4 March, 2004

i have a Universal GSM2 machine down and we check all, but are exaust, the problem is the next, when we make Zero axis tha machine say "AXIS HEAD1 Z POSITION ERROR DURING MOVE RELATIVE COMMAND" AND "TIME UP SPINDLES UP". DO YOU HAVE EXPERIENCIES AT THIS PROBLEMS LET ME NOW THE SOLUTION. THANKS.

reply »

Quetza

#27513

SMT problems | 5 March, 2004

You can have many problems, but the most commons are that your Z belt is too Lose or is time to replace it, the second is that your Z motor went bad.

Hope these woks for you

This message was posted Add this forum to your site! Click to learn more. the Electronics Forum @

reply »

pdeuel

#27595

SMT problems | 9 March, 2004

Contact sensors out of adjustment. If you push up on spindle the led should change state. same if spindle is pulled down. I have also had problems with PTIF error during zeroing Soft stop. last messages recieved were reported as z axis time out during move absolute.

reply »

Primus

#27678

SMT problems | 19 March, 2004

Isn't it funny, I just experienced that for the first time last night? We're always having tape clutch errors. Glad we're not alone on the Z-axis situation.

reply »

#27722

SMT problems | 24 March, 2004

Hi, Why don't You contact Universal GSM tech specialists on this one? Just pick up the phone and explain Your problem and they will help you: Customer Support Center 1-800-842-9732 or 607-779-5000. There is also tech documents on their web site that you can read, either search by error messages, by system or by symptons. Knowledge Base Troubleshooting Guides: http://www.uic.com/wcms/WCMS.nsf/index/Service_Support_18.html

I don't work for UIC but I have always found that it is better to talk to somebody who knows what they are talking about and get correct guiding into the solution directly.

Sincerly, Mika

reply »

JTAG Live PCB Debug Software

SMT Custom Nozzles