Printed Circuit Board Assembly & PCB Design SMT Electronics Assembly Manufacturing Forum

Printed Circuit Board Assembly & PCB Design Forum

SMT electronics assembly manufacturing forum.


room for SMT

Bary

#27410

room for SMT | 27 February, 2004

Hi

i am looking for requirements (standards, norms) for room where is situated SMT equipments. I mean for example lights, ventilation, etc.)

Bary

reply »

#27415

room for SMT | 28 February, 2004

J-STD-001 has what you need.

3.6 Facilities ......................... 4 3.6.1 Environmental Controls ........... 4 3.6.2 Temperature and Humidity ......... 4 3.6.3 Lighting ......................... 4 3.6.4 Field Assembly Operations ........ 4 3.6.5 Moisture Sensitive Components .... 5

reply »


MSK

#27428

room for SMT | 1 March, 2004

Dear Mr.Bery, You do not mention clearly that you already have that SMT eqipments or you have to set a new line.If you are going to install a new line then you can contact by e-mail.According to the line capacity & the floor can be prepair.If you are in India then reply I will give you mobile no then you can contact me.

It all free of cost.

reply »


MSK

#27442

room for SMT | 2 March, 2004

have you find the solution??

reply »

Chris

#27448

room for SMT | 2 March, 2004

Hi Manjeet Singh

We are going to build new building for production area. And i need information about requirements: lights recommend for SMT, ESD, ventilation, building fundation etc.

Chris

reply »

Gabriele

#27456

room for SMT | 3 March, 2004

In addition to the already helpful J-STD-001C,you can find other details also on Standard :IEC-61192-1 "Workmanship Requirements for Electronic Assemblies"

Regards GLS

This message was posted Add this forum to your site! Click to learn more. the Electronics Forum @

reply »

Fluid Dispense Pump Integration

ii-feed SMT Intelligent Feeder